Dental Treatment with Laser Beam -Monitoring Enabling Safe Hard-Tooth-Tissue Removal-. - Keiji Yamada; Takashi Ueda; Akira Hosokawa; Tatsuaki Furumoto; Ryutaro Tanaka (Int. J. Autom. Technol., 2009)

Machined Workpiece Edge Shape Control by Laser Hardening - Optimizing Laser Scan Conditions and Cutter Paths -. - Ryutaro Tanaka; Takashi Kito; Akira Hosokawa; Takashi Ueda; Tatsuaki Furumoto (Int. J. Autom. Technol., 2010)

Medaka Observation Based on Rotation Invariant Features. - Ryutaro Tanaka; Yasutake Okuda; Satoru Takahashi; Shoji Oda; Shun'ichi Kaneko (CANDAR, 2013)

Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel. - Ryutaro Tanaka; Akira Hosokawa; Tatsuaki Furumoto; Takashi Ueda (Int. J. Autom. Technol., 2013)

A Basic Study on the Relations Between Machining Conditions and the Static and Dynamic Components of Forces in Drilling. - Jie Xu; Keiji Yamada; Katsuhiko Seikiya; Ryutaro Tanaka; Yasuo Yamane (Int. J. Autom. Technol., 2013)

Drilling of CFRP with an Electrodeposited Diamond Core Drill - Effects of Air Assistance and Tool Shape -. - Yuto Kojima; Ryutaro Tanaka; Yasuo Yamane; Katsuhiko Sekiya; Keiji Yamada (Int. J. Autom. Technol., 2016)

Milling Process Monitoring Based on Vibration Analysis Using Hilbert-Huang Transform. - Agus Susanto; Chia-Hung Liu; Keiji Yamada; Yean-Ren Hwang; Ryutaro Tanaka; Katsuhiko Sekiya (Int. J. Autom. Technol., 2018)

Hilbert-Huang Transform Analysis of Machining Stability in Ball-Nose End-Milling of Curved Surface. - Muizuddin Azka; Keiji Yamada; Mahfudz Al Huda; Kyosuke Mani; Ryutaro Tanaka; Katsuhiko Sekiya (Int. J. Autom. Technol., 2020)

Biofuel Cell Using Cellulose Nanofiber as Fuel Supply. - Ryutaro Tanaka; Mitsuhiro Ogawa; Satomitsu Imai (IEICE Trans. Electron., 2021)

Effect of Cutting Fluid on Tool Wear in Finished Surface Formation Area of Rounded Nosed Tool When Turning Alloy 304. - Takahide Hayashida; Ryutaro Tanaka; Katsuhiko Sekiya; Keiji Yamada (Int. J. Autom. Technol., 2022)

Biofuel Cell Fueled by Decomposing Cellulose Nanofiber to Glucose by Using Cellulase Enzyme. - Ryutaro Tanaka; Satomitsu Imai (IEICE Trans. Electron., 2023)

Prediction of Surface Roughness Components in Turning with Single Point Tool - Measurement of Tool Edge Contour and Prediction of its Position During Cutting -. - Ryo Sakamoto; Ryutaro Tanaka; Isaí Espinoza-Torres; Israel Martínez-Ramírez; Katsuhiko Sekiya; Keiji Yamada (Int. J. Autom. Technol., 2024)