Analysis and minimization of short-circuit current in mesh clock network. - Seongbo Shim; Minyoung Mo; Sangmin Kim; Youngsoo Shin (ICCD, 2013)

Lithographic defect aware placement using compact standard Cells without inter-cell margin. - Seongbo Shim; Yoojong Lee; Youngsoo Shin (ASP-DAC, 2014)

Identifying redundant inter-cell margins and its application to reducing routing congestion. - Woohyun Chung; Seongbo Shim; Youngsoo Shin (DATE, 2015)

Defect Probability of Directed Self-Assembly Lithography: Fast Identification and Post-Placement Optimization. - Seongbo Shim; Woohyun Chung; Youngsoo Shin (ICCAD, 2015)

A preliminary study on joint to joint control master device for single port laparoscopic surgery robot. - Seongbo Shim; Taehun Kang; Daekeun Ji; Jaesung Hong 001 (URAI, 2015)

Physical design and mask optimization for directed self-assembly lithography (DSAL). - Seongbo Shim; Youngsoo Shin (VLSI-SoC, 2015)

An Analytical Approach to Thermal Design and Optimization With a Temperature-Dependent Power Model. - Seongbo Shim; Jae Wook Lee; Youngsoo Shin (IEEE Trans. Circuits Syst. I Regul. Pap., 2015)

Machine learning (ML)-based lithography optimizations. - Seongbo Shim; Suhyeong Choi; Youngsoo Shin (APCCAS, 2016)

Mask optimization for directed self-assembly lithography: Inverse DSA and inverse lithography. - Seongbo Shim; Youngsoo Shin (ASP-DAC, 2016)

Redundant via insertion for multiple-patterning directed-self-assembly lithography. - Seongbo Shim; Woohyun Chung; Youngsoo Shin (DAC, 2016)

Redundant via insertion in directed self-assembly lithography. - Woohyun Chung; Seongbo Shim; Youngsoo Shin (DATE, 2016)

Placement optimization for MP-DSAL compliant layout. - Seongbo Shim; Woohyun Chung; Youngsoo Shin (ICICDT, 2016)

Crosslink insertion for minimizing OCV clock skew. - Kiwon Yoon; Seongbo Shim; Youngsoo Shin (ISCAS, 2016)

An all-joint-control master device for single-port laparoscopic surgery robots. - Seongbo Shim; Taehun Kang; Daekeun Ji; Hyunseok Choi; Sanghyun Joung; Jaesung Hong 001 (Int. J. Comput. Assist. Radiol. Surg., 2016)

Cut mask optimization for multi-patterning directed self-assembly lithography. - Wachirawit Ponghiran; Seongbo Shim; Youngsoo Shin (DATE, 2017)

Fast Verification of Guide-Patterns for Directed Self-Assembly Lithography. - Seongbo Shim; Youngsoo Shin (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2017)

Lithography Defect Probability and Its Application to Physical Design Optimization. - Seongbo Shim; Woohyun Chung; Youngsoo Shin (IEEE Trans. Very Large Scale Integr. Syst., 2017)

Trigonometric Ratio-Based Remote Center of Motion Mechanism for Bone Drilling. - Seongbo Shim; Seongpung Lee; Daekeun Ji; Hyunseok Choi; Jaesung Hong 001 (IROS, 2018)

Electrothermal Analysis With Nonconvective Boundary Conditions. - Suhyeong Choi; Seongbo Shim; Youngsoo Shin (IEEE Trans. Circuits Syst. II Express Briefs, 2018)

Wire-driven flexible manipulator with constrained spherical joints for minimally invasive surgery. - Daekeun Ji; Taehun Kang; Seongbo Shim; Seongpung Lee; Jaesung Hong 001 (Int. J. Comput. Assist. Radiol. Surg., 2019)

Neural Network Classifier-Based OPC With Imbalanced Training Data. - Suhyeong Choi; Seongbo Shim; Youngsoo Shin (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2019)

Simultaneous Optimization of Patient-Image Registration and Hand-Eye Calibration for Accurate Augmented Reality in Surgery. - Seongpung Lee; Seongbo Shim; Hogun Ha; Hyunki Lee; Jaesung Hong 001 (IEEE Trans. Biomed. Eng., 2020)

Compact Bone Surgery Robot With a High-Resolution and High-Rigidity Remote Center of Motion Mechanism. - Seongbo Shim; Daekeun Ji; Seongpung Lee; Hyunseok Choi; Jaesung Hong 001 (IEEE Trans. Biomed. Eng., 2020)

Lead-Screw-Driven Revolute Joint for Use in the Remote Center of Motion Mechanism. - Seongbo Shim; Hyo-Jeong Cha; Joonho Seo (IEEE Access, 2022)

Wave-Shaped Notched Compliant Joint With High Rigidity. - Seunguk Kim; Seongbo Shim; Daekeun Ji; Jaesung Hong 001 (IEEE Robotics Autom. Lett., 2022)

Robotic system for nasopharyngeal swab sampling based on remote center of motion mechanism. - Seongbo Shim; Joonho Seo (Int. J. Comput. Assist. Radiol. Surg., 2024)

Development of a Compact Optical Tracking System With Motorized Variable Zoom and Rotation for Tracking Range Adjustment in Image-Guided Surgery. - Deokgi Jeung; Daekeun Ji; Hyunseok Choi; Joonho Seo; Seongbo Shim (IEEE Access, 2025)