CPU Model-Based Hardware/Software Co-design, Co-simulation and Analysis Technology for Real-Time Embedded Control Systems. - Makoto Ishikawa; Donald J. McCune; George Saikalis; Shigeru Oho (IEEE Real-Time and Embedded Technology and Applications Symposium, 2007)

CPU Model-Based Mechatronics/Hardware/Software Co-design Technology for Real-Time Embedded Control Systems. - Makoto Ishikawa; George Saikalis; Shigeru Oho (IEICE Trans. Electron., 2007)

Model-based fault injection for failure effect analysis - Evaluation of dependable SRAM for vehicle control units. - Yohei Nakata; Yasuhiro Ito; Yasuo Sugure; Shigeru Oho; Yusuke Takeuchi; Shunsuke Okumura; Hiroshi Kawaguchi 001; Masahiko Yoshimoto (DSN Workshops, 2011)

A Low-Latency DMR Architecture with Efficient Recovering Scheme Exploiting Simultaneously Copiable SRAM. - Go Matsukawa; Yohei Nakata; Yuta Kimi; Yasuo Sugure; Masafumi Shimozawa; Shigeru Oho; Hiroshi Kawaguchi 001; Masahiko Yoshimoto (ARCS Workshops, 2014)

A Low-Latency DMR Architecture with Fast Checkpoint Recovery Scheme. - Go Matsukawa; Yohei Nakata; Yasuo Sugure; Shigeru Oho; Yuta Kimi; Masafumi Shimozawa; Shuhei Yoshida; Hiroshi Kawaguchi 001; Masahiko Yoshimoto (IEICE Trans. Electron., 2015)

An ultrasonic rotary encoder and its application to torque estimation. - Masaharu Hara; Shigeru Oho; Yuto Kaneko (SAS, 2018)

Practical Aspects of Ultrasonic Rotary Encoder - Probe Placing, Real-Time Operation, and Automotive Bench Test. - Shigeru Oho; Yuto Kaneko; Masaharu Hara; Yoshiji Oose; Jun Fukuda (IEEE Trans. Instrum. Meas., 2019)

Ultrasonic Differential Odometry for Vehicle Localization. - Shigeru Oho; Minoru Ohkuma (SICE, 2022)

Accurate Ultrasonic Ranging Using a Beat Signal. - Shigeru Oho; Kazuma Suwa (I2MTC, 2024)