Modern fault diagnosis system for the variable volume pressure filter. - Sirkka-Liisa Jämsä Jounela; Esa Paavola; Tatu Kuitunen; Jerri Kämpe (ECC, 1999)

Industrial applications of the intelligent fault diagnosis system. - Sirkka-Liisa Jämsä Jounela; M. Vermasvuori; S. Haavisto; Jerri Kämpe (ACC, 2001)

An online application of dynamic PLS to a dearomatization process. - Tiina Komulainen; Mauri Sourander; Sirkka-Liisa Jämsä Jounela (Comput. Chem. Eng., 2004)

Control compensation based on upper bound delay in networked control systems - Nikolai Vatanski; Jean-Philippe Georges; Christophe Aubrun; Eric Rondeau; Sirkka-Liisa Jämsä Jounela (CoRR, 2006)

Use of upper bound delay estimate in stability analysis and robust control compensation in networked control systems - Jean-Philippe Georges; Nikolai Vatanski; Eric Rondeau; Sirkka-Liisa Jämsä Jounela (CoRR, 2006)

Future trends in process automation. - Sirkka-Liisa Jämsä Jounela (Annu. Rev. Control., 2007)

An embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process. - Markus Kettunen; Ping Zhang 022; Sirkka-Liisa Jämsä Jounela (Comput. Chem. Eng., 2008)

Application of the enhanced dynamic causal digraph method on a three-layer board machine. - Hui Cheng; Vesa-Matti Tikkala; Sirkka-Liisa Jämsä Jounela (ECC, 2009)

Automation and Robotics in Mining and Mineral Processing. - Sirkka-Liisa Jämsä Jounela; Greg Baiden (Handbook of Automation, 2009)

Iterative optimization of the economic efficiency of an industrial process within the validity area of the static plant model and its application to a Pulp Mill. - Alexey Zakharov; Sirkka-Liisa Jämsä Jounela (Comput. Chem. Eng., 2011)

Application of the Enhanced Dynamic Causal Digraph Method on a Three-Layer Board Machine. - Hui Cheng; Vesa-Matti Tikkala; Alexey Zakharov; Tommi Myller; Sirkka-Liisa Jämsä Jounela (IEEE Trans. Control. Syst. Technol., 2011)

Outline of a fault diagnosis system for a large-scale board machine. - Sirkka-Liisa Jämsä Jounela; Vesa-Matti Tikkala; Alexey Zakharov; Octavio Pozo Garcia (CCA, 2012)

Monitoring of caliper sensor fouling in a board machine using self-organising maps. - Vesa-Matti Tikkala; Sirkka-Liisa Jämsä Jounela (Expert Syst. Appl., 2012)

Data characterization for automatic selection of valve stiction detection algorithms. - Alexey Zakharov; Elena Zattoni; Lei Xie; Octavio Pozo Garcia; Sirkka-Liisa Jämsä Jounela (CDC, 2013)

A dynamic prognosis algorithm in distributed fault tolerant model predictive control. - Alexey Zakharov; Miao Yu 002; Sirkka-Liisa Jämsä Jounela (CCA, 2014)

Fault propagation analysis by combining data-driven causal analysis and plant connectivity. - Rinat Landman; Jukka Kortela; Sirkka-Liisa Jämsä Jounela (ETFA, 2014)

Fault propagation analysis of oscillations in control loops using data-driven causality and plant connectivity. - Rinat Landman; Jukka Kortela; Qiang Sun; Sirkka-Liisa Jämsä Jounela (Comput. Chem. Eng., 2014)

A performance optimization algorithm for controller reconfiguration in fault tolerant distributed model predictive control. - Alexey Zakharov; Elena Zattoni; Miao Yu 002; Sirkka-Liisa Jämsä Jounela (CASE, 2015)

Fault-tolerant model predictive control (FTMPC) for the BioGrate boiler. - Jukka Kortela; Sirkka-Liisa Jämsä Jounela (ETFA, 2015)

Improvement of load-following capacity of grate boilers based on the combustion power soft-sensor. - Jukka Kortela; Sirkka-Liisa Jämsä Jounela (ETFA, 2016)

Data and Reliability Characterization Strategy for Automatic Detection of Valve Stiction in Control Loops. - Octavio Pozo Garcia; Alexey Zakharov; Sirkka-Liisa Jämsä Jounela (IEEE Trans. Control. Syst. Technol., 2017)

Simplified Mechanistic Model of the Multiple Hearth Furnace for Control Development. - José Valentín Gómez Fuentes; Sirkka-Liisa Jämsä Jounela (Simul. Notes Eur., 2018)

Control strategy of a Multiple Hearth Furnace enhanced by machine learning algorithms. - José Valentín Gómez Fuentes; Sirkka-Liisa Jämsä Jounela; David Moseley; Tom Skuse (SysTol, 2019)

Process Monitoring Platform based on Industry 4.0 tools: a waste-to-energy plant case study. - James Clovis Kabugo; Sirkka-Liisa Jämsä Jounela; Robert Schiemann; Christian Binder (SysTol, 2019)

Optimal planning of municipal solid waste management systems in an integrated supply chain network. - Maryam Mohammadi; Sirkka-Liisa Jämsä Jounela; Iiro Harjunkoski (Comput. Chem. Eng., 2019)

Fault Propagation Analysis by Implementing Nearest Neighbors Method Using Process Connectivity. - Rinat Landman; Sirkka-Liisa Jämsä Jounela (IEEE Trans. Control. Syst. Technol., 2019)