ISO Efficiency Curves of a -Two-Phase Hybrid Stepping Motor. - Stijn Derammelaere; Bram Vervisch; Johannes Cottyn; Bart Vanwalleghem; Kurt Stockman; Frederik De Belie; Lieven Vandevelde; Peter Cox; Griet Van den Abeele (IAS, 2010)

Using general synchronous machine theory to integrate PLL controller dynamics into a static power electronic converter model. - Colin Debruyne; Stijn Derammelaere; Jan Desmet; Lieven Vandevelde (IAS, 2012)

Open loop control of a stepping motor with step loss detection and stall detection using back-EMF based load angle estimation. - Stijn Derammelaere; Florian Verbelen; Kurt Stockman (AIM, 2014)

Energy efficiency measurement procedure for gearboxes in their entire operating range. - Stijn Derammelaere; Steve Dereyne; Pieter Defreyne; Elewijn Algoet; Florian Verbelen; Kurt Stockman (IAS, 2014)

Online Identification of a Mechanical System in Frequency Domain Using Sliding DFT. - Niko Nevaranta; Stijn Derammelaere; Jukka Parkkinen; Bram Vervisch; Tuomo Lindh; Kurt Stockman; Markku Niemela; Veli-Pekka Pyrhonen; Juha Pyrhönen (IEEE Trans. Ind. Electron., 2016)

Co-design of controller and setup configuration using Genetic Algorithm. - Michiel Haemers; Stijn Derammelaere; Kurt Stockman (ETFA, 2017)

Leveraging Domain Knowledge for the Efficient Design-Space Exploration of Advanced Cyber-Physical Systems. - Yon Vanommeslaeghe; Joachim Denil; Jasper De Viaene; David Ceulemans; Stijn Derammelaere; Paul De Meulenaere (DSD, 2019)

CAD Enabled Trajectory optimization and Accurate Motion Control for Repetitive Tasks. - Nick Van Oosterwyck; Foeke Vanbecelaere; Michiel Haemers; David Ceulemans; Kurt Stockman; Stijn Derammelaere (ICCA, 2019)

Identification of Dynamic Systems with Position Dependent Load Parameters. - Foeke Vanbecelaere; Stijn Derammelaere; Jos Knockaert; Kurt Stockman; Michael Monte (ICCMA, 2019)

Automatic tuning of predictive control in a hydrostatic drive train system in nominal operation. - Clara M. Ionescu; Michiel Haemers; Anca Maxim; Cosmin Copot; Stijn Derammelaere; Kurt Stockman (ICSTCC, 2019)

Realtime locomotion control of a snakeboard robot based on a novel model, enabling better physical insights. - Stijn Derammelaere; Cosmin Copot; Michiel Haemers; Florian Verbelen; Bram Vervisch; Clara M. Ionescu; Kurt Stockman (Eur. J. Control, 2019)

CAD Based Trajectory optimization of PTP Motions using Chebyshev Polynomials. - Nick Van Oosterwyck; Abdelmajid Ben Yahya; Annie Cuyt; Stijn Derammelaere (AIM, 2020)

Ontological reasoning in the design space exploration of advanced cyber-physical systems. - Yon Vanommeslaeghe; Joachim Denil; Jasper De Viaene; David Ceulemans; Stijn Derammelaere; Paul De Meulenaere (Microprocess. Microsystems, 2021)

Time-optimal bang-bang driven rest-to-rest motion through an angular switching point. - David Ceulemans; Nick Van Oosterwyck; Jasper De Viaene; Jan Steckel; Stijn Derammelaere (AIM, 2022)

Bode-based speed Proportional Integral and notch filter tuning of a Permanent Magnet Synchronous Machine driven flexible system. - Santiago Ramos Garces; Abdelmajid Ben Yahya; Nick Van Oosterwyck; Dries Jacques; Stijn Derammelaere (AIM, 2022)

Validation and uncertainty in model-based design space exploration: an experience report. - Yon Vanommeslaeghe; David Ceulemans; Bert Van Acker; Joachim Denil; Stijn Derammelaere; Paul De Meulenaere (MoDELS (Companion), 2022)

CAD Based Design Optimization of Four-bar Mechanisms: a coronaventilator case study. - Abdelmajid Ben Yahya; Nick Van Oosterwyck; Ferre Knaepkens; Simon Houwen; Stijn Herregodts; Jan Herregodts; Bart Vanwalleghem; Annie Cuyt; Stijn Derammelaere (CoRR, 2022)

Energy Optimal Point-to-Point Motion Profile Optimization. - Nick Van Oosterwyck; Foeke Vanbecelaere; Ferre Knaepkens; Michael Monte; Kurt Stockman; Annie Cuyt; Stijn Derammelaere (CoRR, 2022)

An Industrial Applicable Approach towards Design Optimization of a Mechanism: a Coronaventilator Case Study. - Abdelmajid Ben Yahya; Nick Van Oosterwyck; Jan Herregodts; Stijn Herregodts; Simon Houwen; Bart Vanwalleghem; Stijn Derammelaere (CoRR, 2022)

Self-learning current optimizing control for conventional stepping motor drive technique based on step pulses. - Jasper De Viaene; David Ceulemans; Stijn Derammelaere; Kurt Stockman (Trans. Inst. Meas. Control, 2022)

An Industrial Applicable Approach towards Design Optimization of a Reciprocating Mechanism: an emergency ventilator case study. - Abdelmajid Ben Yahya; Nick Van Oosterwyck; Jan Herregodts; Stijn Herregodts; Simon Houwen; Bart Vanwalleghem; Stijn Derammelaere (AIM, 2023)

CAD-based co-optimizations for geometry and motion profile towards energy-optimal point-to-point mechanisms. - Brecht Maes; Abdelmajid Ben Yahya; Nick Van Oosterwyck; Amélie Chevalier; Stijn Derammelaere (AIM, 2024)

Safe Bayesian optimization with simulation-informed Gaussian process for the constraints. - Santiago Ramos Garces; Ivan De Boi; João Pedro Ramos; Marc Dierckx; Lucia Popescu; Stijn Derammelaere (ICAAI, 2024)

Geometric Optimization through CAD-Based Bayesian Optimization with unknown constraint. - Abdelmajid Ben Yahya; Robbe De Laet; Santiago Ramos Garces; Nick Van Oosterwyck; Ivan De Boi; Annie Cuyt; Stijn Derammelaere (ICCMA, 2024)

Mechanism Design Optimization through CAD-Based Bayesian Optimization and Quantified Constraints. - Abdelmajid Ben Yahya; Santiago Ramos Garces; Nick Van Oosterwyck; Annie Cuyt; Stijn Derammelaere (CoRR, 2024)

Energy-efficient motion planning for robotic systems using polynomials in the Chebyshev basis. - Robbe De Laet; Nick Van Oosterwyck; Lorenzo Scalera; Annie Cuyt; Alessandro Gasparetto; Stijn Derammelaere (Robotics Auton. Syst., 2025)