Performance Measures and Schedules in Periodic Job Shops. - Tae-Eog Lee; Marc E. Posner (Oper. Res., 1997)

A two-phase approach for design of supervisory controllers for robot cells: Model checking and Markov decision models. - Tae-Eog Lee; Jin-Hwan Lee (Ann. Oper. Res., 1998)

An integrated application framework for a cluster tool controller for semiconductor manufacturing. - Tae-Eog Lee; Jin-Hwan Lee (ETFA (2), 2001)

Modeling and implementing a real-time scheduler for dual-armed cluster tools. - Yong-Ho Shin; Tae-Eog Lee; Ja-Hee Kim; Hwan-Yong Lee (Comput. Ind., 2001)

An extended maximum entropy method for estimation of rare event probabilities. - Tae-Eog Lee; Young-Doo Lee (Eur. Trans. Telecommun., 2002)

Automata-based supervisory control logic design for a multi-robot assembly cell. - Jin-Kyu Lee; Tae-Eog Lee (Int. J. Comput. Integr. Manuf., 2002)

Schedule stabilization and robust timing control for time-constrained cluster tools. - Ja-Hee Kim; Tae-Eog Lee (ICRA, 2003)

Cluster tool module communication based on a high-level fieldbus. - Jin-Hwan Lee; Tae-Eog Lee; Jeong-Hyeon Park (Int. J. Comput. Integr. Manuf., 2004)

Virtual control - a virtual cluster tool for testing and verifying a cluster tool controller and a scheduler. - Yong-Jae Joo; Tae-Eog Lee (IEEE Robotics Autom. Mag., 2004)

SECAM: a supervisory equipment control application model for integrated semiconductor manufacturing equipment. - Jin-Hwan Lee; Tae-Eog Lee (IEEE Robotics Autom. Mag., 2004)

Steady state analysis of a timed event graph with time window constraints. - Tae-Eog Lee; Seong-Ho Park (CASE, 2005)

Stochastic cyclic flow lines with blocking: Markovian models. - Young-Doo Lee; Tae-Eog Lee (OR Spectr., 2005)

An extended event graph with negative places and tokens for time window constraints. - Tae-Eog Lee; Seong-Ho Park (IEEE Trans Autom. Sci. Eng., 2005)

Token delays and generalized workload balancing for timed event graphs with application to cluster tool operation. - Tae-Eog Lee; Hwan-Yong Lee; R. S. Sreenivas (CASE, 2006)

Scheduling and control of automated manufacturing systems. - Hans-Otto Günther; Tae-Eog Lee (OR Spectr., 2007)

Efficient scheduling method based on an assignment model for robotized cluster tools. - Chihyun Jung; Tae-Eog Lee (CASE, 2008)

Optimal scheduling of dual-armed cluster tools without swap restriction. - Jin-Heum Paek; Tae-Eog Lee (CASE, 2008)

A review of scheduling theory and methods for semiconductor manufacturing cluster tools. - Tae-Eog Lee (WSC, 2008)

Scheduling a multi-chip package assembly line with reentrant processes and unrelated parallel machines. - Sang-Jin Lee; Tae-Eog Lee (WSC, 2008)

A Branch-and-price algorithm for placement routing for a multi-head beam-type component placement tool. - Dong-Seok Sun; Tae-Eog Lee (OR Spectr., 2008)

Schedulability Analysis of Time-Constrained Cluster Tools With Bounded Time Variation by an Extended Petri Net. - Ja-Hee Kim; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2008)

Semiconductor Manufacturing Automation. - Tae-Eog Lee (Handbook of Automation, 2009)

An open scheduling architecture for cluster tools. - Jun-Ho Lee; Tae-Eog Lee (CASE, 2010)

Scheduling of cluster tools with ready time constraints for small lot production. - Hyun-Jung Kim; Tae-Eog Lee (CASE, 2011)

Concurrent processing of multiple wafer types in a single-armed cluster tool. - Jun-Ho Lee; Tae-Eog Lee (CASE, 2011)

Cyclic scheduling of cluster tools with non-identical chamber access times. - Dae-Kyu Kim; Chihyun Jung; Tae-Eog Lee; Yu-Ju Jung (WSC, 2011)

Scheduling of a dual-armed cluster tool with two independent robot arms. - Daniel Tonke; Tae-Eog Lee (CASE, 2012)

Scheduling of Petri nets as a multi-objective shortest path problem. - Uno Wikborg; Tae-Eog Lee (CASE, 2012)

Scheduling transient periods of single-armed cluster tools. - Jun-Ho Lee; Tae-Eog Lee (ICRA, 2012)

Feedback control design for cluster tools with wafer residency time constraints. - Chulhan Kim; Tae-Eog Lee (SMC, 2012)

A petri net-based modeling and scheduling with a branch and bound algorithm. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (SMC, 2012)

Scheduling a wet station using a branch and bound algorithm. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (SMC, 2012)

Optimal scheduling of transient cycles for single-armed cluster tools. - Dae-Kyu Kim; Tae-Eog Lee; Hyun-Jung Kim (CASE, 2013)

Scheduling timed Petri nets with a time-feasible reachability tree. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (ICNSC, 2013)

Cyclic Scheduling of Sequentially Connected Cluster Tools with a Single I/O Module. - Dae-Kyu Kim; Tae-Eog Lee (MIM, 2013)

Two-stage lot scheduling with waiting time constraints and due dates. - Tae-Sun Yu; Hyun-Jung Kim; Chanhwi Jung; Tae-Eog Lee (WSC, 2013)

Scheduling Cluster Tools With Ready Time Constraints for Consecutive Small Lots. - Hyun-Jung Kim; Jun-Ho Lee; Chihyun Jung; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2013)

Noncyclic Scheduling for Timed Discrete-Event Systems With Application to Single-Armed Cluster Tools Using Pareto-Optimal Optimization. - Uno Wikborg; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2013)

New insights on river crossing operation using rafts by modeling and simulation (WIP). - Chungjo Jung; Woo-Seop Yun; Tae-Eog Lee (SummerSim, 2014)

Steady state analysis of timed event graphs with time window constraints. - Tae-Eog Lee; Seong-Ho Park; Chihyun Jung (Discret. Appl. Math., 2014)

Non-Cyclic Scheduling of a Wet Station. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2014)

Scheduling Cluster Tools for Concurrent Processing of Two Wafer Types. - Jun-Ho Lee; Hyun-Jung Kim; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2014)

Agent Based Modelling Framework for Military Domain Specific Command and Control. - Woo-Seop Yun; Tae-Eog Lee (SIMULTECH, 2015)

Agent-Based Simulation of Time to Decide: Military Commands and Time Delays. - Woo-Seop Yun; Il-Chul Moon; Tae-Eog Lee (J. Artif. Soc. Soc. Simul., 2015)

A Branch and Bound Algorithm for Cyclic Scheduling of Timed Petri Nets. - Chihyun Jung; Hyun-Jung Kim; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2015)

Noncyclic Scheduling of Cluster Tools With a Branch and Bound Algorithm. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2015)

Time-Feasible Reachability Tree for Noncyclic Scheduling of Timed Petri Nets. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2015)

Analysis and control of wafer delays in a dual-armed cluster tool for a K-cyclic schedule. - Dong-Hyun Roh; Tae-Eog Lee (SMC, 2016)

Modeling and simulation-based analysis of effectiveness of tactical level chemical defense operations. - Sung-Gil Ko; Woo-Seop Yun; Tae-Eog Lee (WSC, 2016)

Feedback Control of Cluster Tools for Regulating Wafer Delays. - Chulhan Kim; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2016)

Optimal Scheduling of Transient Cycles for Single-Armed Cluster Tools With Parallel Chambers. - Dae-Kyu Kim; Tae-Eog Lee; Hyun-Jung Kim (IEEE Trans Autom. Sci. Eng., 2016)

Schedulability Analysis for Noncyclic Operation of Time-Constrained Cluster Tools With Time Variation. - Hyun-Jung Kim; Jun-Ho Lee; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2016)

Modeling, Analysis, and Scheduling of Cluster Tools With Two Independent Arms. - Daniel Tonke; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2016)

Optimal scheduling for sequentially connected cluster tools with dual-armed robots and a single input and output module. - Dae-Kyu Kim; Hyun-Jung Kim; Tae-Eog Lee (Int. J. Prod. Res., 2017)

Characterizing Token Delays of Timed Event Graphs for K-Cyclic Schedules. - Tae-Eog Lee; Hyun-Jung Kim; Dong-Hyun Roh; Ramavarapu S. Sreenivas (IEEE Trans. Autom. Control., 2017)

Characterizing the Worst-Case Wafer Delay in a Cluster Tool Operated in a K-Cyclic Schedule. - Dong-Hyun Roh; Tae-Eog Lee (CASE, 2018)

Multi-agent Reinforcement Learning Approach for Scheduling Cluster Tools with Condition Based Chamber Cleaning Operations. - Cheolhui Hong; Tae-Eog Lee (ICMLA, 2018)

Scheduling Single-Armed Cluster Tools With Chamber Cleaning Operations. - Tae-Sun Yu; Hyun-Jung Kim; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2018)

Scheduling Dual-Armed Cluster Tools for Concurrent Processing of Multiple Wafer Types With Identical Job Flows. - Sung-Gil Ko; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2019)

A New Class of Sequences Without Interferences for Cluster Tools With Tight Wafer Delay Constraints. - Yuchul Lim; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2019)

Scheduling Dual-Armed Cluster Tools With Chamber Cleaning Operations. - Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2019)

Modeling, Simulation and Supervisory Control of Semiconductor Manufacturing Cluster Tools with an Equipment Front-End Module. - Cheolhui Hong; Tae-Eog Lee (CASE, 2020)

Wafer delay analysis and control of dual-armed cluster tools with chamber cleaning operations. - Tae-Sun Yu; Tae-Eog Lee (Int. J. Prod. Res., 2020)

Adaptive Scheduling of Cluster Tools With Wafer Delay Constraints and Process Time Variation. - Yuchul Lim; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2020)

On Scheduling a Photolithograhy Toolset Based on a Deep Reinforcement Learning Approach with Action Filter. - Taehyung Kim; Hyeong-Ook Kim; Tae-Eog Lee; James Robert Morrison; Eungjin Kim (WSC, 2021)

Industry 3.5: IE developments and prospects in the Asia-pacific region. - Chen-Fu Chien 001; Abdul Hakim Halim; Zhen He; Thanh Phong Ho; Kazuyoshi Ishii; Tae-Eog Lee (Comput. Ind. Eng., 2021)

Reachability Tree-Based Optimization Algorithm for Cyclic Scheduling of Timed Petri Nets. - Chulhan Kim; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2021)

Wafer Delay Analysis and Workload Balancing of Parallel Chambers for Dual-Armed Cluster Tools With Multiple Wafer Types. - Sung-Gil Ko; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2021)

Integrated Scheduling of a Dual-Armed Cluster Tool for Maximizing Steady Schedule Patterns. - Woojin Kim; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans. Syst. Man Cybern. Syst., 2021)

Feedback Control of Cluster Tools: Stability Against Random Time Disruptions. - Chulhan Kim; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2022)

Cleaning Plan Optimization for Dual-Armed Cluster Tools With General Chamber Cleaning Periods. - Tae-Gyung Lee; Tae-Sun Yu; Tae-Eog Lee (IEEE Trans Autom. Sci. Eng., 2023)

Kanban Feedback Control for Wafer Delay Regulation of Cluster Tools. - Dong-Hyun Roh; Tae-Eog Lee; Claude Martinez (IEEE Trans Autom. Sci. Eng., 2025)