Dental Treatment with Laser Beam -Monitoring Enabling Safe Hard-Tooth-Tissue Removal-. - Keiji Yamada; Takashi Ueda; Akira Hosokawa; Tatsuaki Furumoto; Ryutaro Tanaka (Int. J. Autom. Technol., 2009)

Machined Workpiece Edge Shape Control by Laser Hardening - Optimizing Laser Scan Conditions and Cutter Paths -. - Ryutaro Tanaka; Takashi Kito; Akira Hosokawa; Takashi Ueda; Tatsuaki Furumoto (Int. J. Autom. Technol., 2010)

Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel. - Ryutaro Tanaka; Akira Hosokawa; Tatsuaki Furumoto; Takashi Ueda (Int. J. Autom. Technol., 2013)

High-Quality End Milling of CFRP - Inclination Milling with High-Helix End Mill -. - Akira Hosokawa; Naoya Hirose; Takashi Ueda; Tomohiro Koyano; Tatsuaki Furumoto (Int. J. Autom. Technol., 2016)

Cutting Characteristics of Binderless Diamond Tools in High-Speed Turning of Ti-6Al-4V - Availability of Single-Crystal and Nano-Polycrystalline Diamond -. - Abang Mohammad Nizam Abang Kamaruddin; Akira Hosokawa; Takashi Ueda; Tatsuaki Furumoto (Int. J. Autom. Technol., 2016)

Formation Mechanism of Pores Inside Structure Fabricated by Metal-Based Additive Manufacturing. - Kyota Egashira; Tatsuaki Furumoto; Kiichi Hishida; Satoshi Abe; Tomohiro Koyano; Yohei Hashimoto; Akira Hosokawa (Int. J. Autom. Technol., 2019)

Editorial: Additive Manufacturing with Metals. - Tatsuaki Furumoto (Int. J. Autom. Technol., 2019)

Studies on Eco-Friendly Grinding with an Extremely Small Amount of Coolant - Applicability of Contact-Type Flexible Brush-Nozzle -. - Akira Hosokawa; Ryosuke Shimizu; Takahiro Kiwata; Tomohiro Koyano; Tatsuaki Furumoto; Yohei Hashimoto (Int. J. Autom. Technol., 2019)

Fabrication of Release Agent Supply Die with Porous Structure Using Metal-Based Additive Manufacturing. - Hironao Chiba; Tatsuaki Furumoto; Yuki Hori; Makoto Nikawa; Nobuhisa Hayashi; Mitsugu Yamaguchi (Int. J. Autom. Technol., 2021)

Study on Laser Scan Strategy for Correcting Anisotropic Residual Stress Distribution and Reducing Warpage in Structures Fabricated by PBF-LB/M. - Atsushi Ezura; Satoshi Abe; Tatsuaki Furumoto; Toshihiko Sasaki; Jiro Sakamoto (Int. J. Autom. Technol., 2023)

Editorial: Recent Trends in Additive Manufacturing. - Tatsuaki Furumoto; Hiroyuki Sasahara (Int. J. Autom. Technol., 2023)

Influence of Oxygen Concentration in Building Environment and Oxidation Extent of Maraging Steel on Spatter Generation Behavior in Powder Bed Fusion. - Mitsugu Yamaguchi; Kotaro Tsubouchi; Asako Kamimoto; Shinnosuke Yamada; Kenji Sugiyama; Tatsuaki Furumoto (Int. J. Autom. Technol., 2023)

Experimental Investigation of Spatter Particle Behavior and Improvement in Build Quality in PBF-LB. - Mitsuyoshi Yoshida; Tatsuaki Furumoto; Kazuaki Sakuma; Kai Kawasaki; Kazuyuki Itagaki (Int. J. Autom. Technol., 2023)

Finishing Speed Improvement Using Side Cover Plates in Gyro Finishing. - Yohei Hashimoto; Yugo Nakayama; Tatsuaki Furumoto; Akihito Sekiya; Tetsuya Yamada; Tatsuki Kawahara; Akira Hosokawa (Int. J. Autom. Technol., 2023)

Effect of Pulse Conditions on Machining Characteristics in Bipolar-Pulse Electrochemical Machining of Cemented Carbide. - Tomohiro Koyano; Taisei Hokin; Tatsuaki Furumoto (Int. J. Autom. Technol., 2023)

Finishing Characteristics with Free Abrasive Grains and Cooling Performance of Internal Channels with Different Cross-Sectional Geometries. - Mitsugu Yamaguchi; Kotaro Kushima; Shuuji Inagaki; Masao Tsuji; Tatsuaki Furumoto (Int. J. Autom. Technol., 2024)