A Dual Pixel CMOS CCD Image Sensor. - Shinji Uya; Jun Hasegawa; Jin Murayama; Tetsuo Yamada (PICS, 1999)

A progressive scan CCD image sensor for DSC applications. - Tetsuo Yamada; Katsumi Ikeda; Yong-Gwan Kim; Hideki Wakoh; Tetsuo Toma; Tomohiro Sakamoto; Kazuaki Ogawa; Eiichi Okamoto; Kazuyuki Masukane; Kazuya Oda; Masafumi Inuiya (IEEE J. Solid State Circuits, 2000)

A performance evaluation of disassembly systems with reverse blocking. - Tetsuo Yamada; Naoyuki Mizuhara; Hisashi Yamamoto; Masayuki Matsui (Comput. Ind. Eng., 2009)

Conformational transitions of cyclic D, L-peptides. - Hajime Okamoto; Tetsuo Yamada; Shuichiro Kihara; Kazumasa Takechi; Hiroyuki Takagi; Kyozaburo Takeda (J. Comput. Chem., 2009)

Analysis of effectiveness and benefits of collaboration modes with information- and knowledge-sharing. - Sang Won Yoon; Masayuki Matsui; Tetsuo Yamada; Shimon Y. Nof (J. Intell. Manuf., 2011)

Queueing Modeling of Material Sorting Disassembly System with Overflows. - Tetsuo Yamada; Rizka Aisha Rahmi Hariadi; Shota Tsuchiya (MIM, 2013)

Toward One Giga Frames per Second - Evolution of in Situ Storage Image Sensors. - Takeharu G. Etoh; Son Vu Truong Dao; Tetsuo Yamada; Edoardo Charbon (Sensors, 2013)

A Design Method for Product Upgradability with Different Customer Demands. - Masato Inoue; Shuho Yamada; Tetsuo Yamada; Stefan Bracke (PLM, 2014)

Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load. - Shuho Yamada; Tetsuo Yamada; Stefan Bracke; Masato Inoue (Int. J. Autom. Technol., 2016)

Linear Physical Programming Oriented Approach of Reverse Supply Chain Network Design for Costs and Recycling Rate. - Hiromasa Ijuin; Yuki Kinoshita; Tetsuo Yamada; Aya Ishigaki; Masato Inoue (IIAI-AAI, 2017)

Effect of Material Prices for Global Supply Chain Network with Trans-Pacific Partnership. - Kengo Nakamura 002; Hiromasa Ijuin; Tetsuo Yamada; Aya Ishigaki; Masato Inoue (IIAI-AAI, 2017)

Global supply chain network design and Asian analysis with material-based carbon emissions and tax. - Tomoyuki Urata; Tetsuo Yamada; Norihiro Itsubo; Masato Inoue (Comput. Ind. Eng., 2017)

Design of a Closed-Loop Supply Chain with Stochastic Product Returns. - Aya Ishigaki; Tetsuo Yamada; Surendra M. Gupta (Int. J. Autom. Technol., 2017)

Comparison between Different Products by Disassembly System Design with Parts Selection for Cost, Recycling and CO2 Saving Rates Using Multi-objective Optimization. - Kento Igarashi; Tetsuo Yamada; Norihiro Itsubo; Masato Inoue (IIAI-AAI, 2018)

Mathematical Modeling of Multi-player Multi-objective Decision Making by Linear Physical Programming. - Tomoaki Yatsuka; Aya Ishigaki; Hiromasa Ijuin; Yuki Kinoshita; Tetsuo Yamada; Masato Inoue (IIAI-AAI, 2018)

A Strategy of Providing Upgradable Product Service System for Economic and Environmental Balance. - Shuho Yamada; Takumi Sugiura; Tetsuo Yamada; Stefan Bracke; Masato Inoue (TE, 2018)

Disassembly Reuse Part Selection for Recovery Rate and Cost with Lifetime Analysis. - Shota Hasegawa; Yuki Kinoshita; Tetsuo Yamada; Masato Inoue; Stefan Bracke (Int. J. Autom. Technol., 2018)

Modeling and Analysis of a Closed-Loop Supply Chain in Consideration of Extra Demand. - Ayako Okuda; Aya Ishigaki; Tetsuo Yamada; Surendra M. Gupta (Int. J. Autom. Technol., 2018)

Design Problem of Hybrid Assembly Line with Humans and Robots Considering Automation Difficulty Level. - Takashi Miyauchi; Tetsuo Yamada (IIAI-AAI, 2020)

A Comparative Study of Job-Related Stress in Long-Term Care Workers in Japan and China. - Yating Yu; Seiko Taki; Masato Takanokura; Masaru Kawakami; Tetsuo Yamada; Shuyu Liang (IIAI-AAI, 2020)

Decision Support Method for Upgrade Cycle Planning and Product Architecture Design of an Upgradable Product. - Shuho Yamada; Shogo Miyajima; Tetsuo Yamada; Stefan Bracke; Masato Inoue (Int. J. Autom. Technol., 2020)

Collaboration Strategy for a Decentralized Supply Chain Using Linear Physical Programming. - Tomoaki Yatsuka; Aya Ishigaki; Surendra M. Gupta; Yuki Kinoshita; Tetsuo Yamada; Masato Inoue (Int. J. Autom. Technol., 2020)

Remanufacturing Option Selection with Disassembly for Recovery Rate and Profit. - Kazuki Yoda; Hayate Irie; Yuki Kinoshita; Tetsuo Yamada; Shuho Yamada; Masato Inoue (Int. J. Autom. Technol., 2020)

Bi-objective Problem of Material-based GreenHouse Gas Emission and Costs by Global Supply Chain Network Disruption across TPP countries during COVID-19. - Takaki Nagao; Hiromasa Ijuin; Keisuke Nagasawa; Tetsuo Yamada (IWCIA, 2021)

Rehabilitation Layout Planning for Elderly Daytime Care Service for Total Flow of Staffs and Remoteness of Equipment. - Koki Karube; Hiromasa Ijuin; Masato Takanokura; Munenori Kakehi; Tetsuo Yamada (IIAI-AAI-Winter, 2021)

Technological innovation, new solutions, branding, and promotion: Twitter and technical report use in Japanese's companies. - Yuta Kitano; Tetsuo Yamada; Kim Hua Tan (Enterp. Inf. Syst., 2021)

Variability Specific to a Closed-Loop Supply Chain with Product Deterioration. - Jundai Koketsu; Aya Ishigaki; Hiromasa Ijuin; Tetsuo Yamada (Int. J. Autom. Technol., 2022)

Modelling of decarbonised global and local supply chain network for material-based greenhouse gas emission and costs with COVID-19 disruption and trans-Pacific partnership. - Takaki Nagao; Hiromasa Ijuin; Keisuke Nagasawa; Tetsuo Yamada (Int. J. Comput. Intell. Stud., 2022)

Modelling of Decarbonized Global and Local Supply Chain Network for Material-Based Greenhouse Gas emission and costs with COVID-19 disruption and trans-Pacific partnership. - Tetsuo Yamada; Hiromasa Ijuin; Keisuke Nagasawa; Takaki Nagao (Int. J. Comput. Intell. Stud., 2022)

Identification of potential improvement assembly movements using worker classification by motion capture and machine learning. - Ryuto Kawane; Hiromasa Ijuin; Koki Karube; Masao Sugi; Tomohiro Nakada; Tetsuo Yamada (IWCIA, 2023)

Assembly Movement Analysis by Work Classification Using Motion Capture and Machine Learning. - Ryuto Kawane; Koki Karube; Masao Sugi; Tomohiro Nakada; Tetsuo Yamada (Int. J. Autom. Technol., 2025)