Thermal stresses during electro-chemical spark machining. - R. S. Mulik; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2005)

Temperature distribution in the workpiece due to electro-discharge diamond surface grinding using FEM. - Vinod Yadava; V. K. Jain; Prakash M. Dixit (Int. J. Manuf. Technol. Manag., 2005)

Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method. - Patil Makarand Ramu; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2008)

Optimisation of cut qualities during pulsed Nd: YAG laser cutting of SUPERNI 718 thin sheet for straight profile. - Amit Sharma; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2011)

Investigation of Temperature Distribution in the Workpiece During High Speed Deep Surface Grinding using FEM. - Audhesh Narayan; Vinod Yadava (Int. J. Manuf. Mater. Mech. Eng., 2012)

Intelligent Modelling and Multi-Objective Optimisation of Laser Beam Cutting of Nickel Based Superalloy Sheet. - Amit Sharma; Vinod Yadava; K. B. Judal (Int. J. Manuf. Mater. Mech. Eng., 2013)

A study of electrochemical magnetic abrasive machining process. - K. B. Judal; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2013)

Simultaneous optimisation of average kerf taper and surface roughness during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile. - Amit Sharma; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2013)

Three dimensional thermal finite element simulation of electro-discharge diamond surface grinding. - P. S. Balaji; Vinod Yadava (Simul. Model. Pract. Theory, 2013)

Experimentation and prediction of material removal rate of electrical discharge micromachining of nickel-based super alloy thin sheet. - Rajesh Kumar Porwal; Vinod Yadava (Int. J. Comput. Aided Eng. Technol., 2014)

Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining. - Rajesh Kumar Porwal; Vinod Yadava; J. Ramkumar (Int. J. Manuf. Mater. Mech. Eng., 2014)

Modelling of performance characteristics during sinking electrical discharge micromachining of Ti-6Al-4V thin sheet. - Rajesh Kumar Porwal; Vinod Yadava (Int. J. Manuf. Res., 2014)

A new way of erosion-abrasion hybrid machining using slotted-diamond grinding wheel. - Ravindra Nath Yadav; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2014)

Modelling and simulation of spark assisted diamond face grinding of tungsten carbide-cobalt composite using ANN. - Ravindra Nath Yadav; Vinod Yadava; G. K. Singh (Int. J. Manuf. Technol. Manag., 2014)

Experimental modelling and optimisation of process parameters of hole drilling by electrical discharge machining of aerospace titanium alloy. - Umacharan Singh Yadav; Vinod Yadava (Int. J. Manuf. Technol. Manag., 2015)