Optimizing the Performance of Electrostatic Comb-Drive Actuators Using Neural Networks. - Hesham Ahmed; Walied A. Moussa (ICMENS, 2003)

Development of a Humidity Microsensor with Thermal Reset. - A. H. M. Habib Ahsan; Carlos F. Lange; Walied A. Moussa (ICMENS, 2003)

Finite Element Modeling of a Capacitive Micromachined Ultrasonic Transducer. - Bradley J. Kirchmayer; Walied A. Moussa; M. David Checkel (ICMENS, 2003)

Application of Adaptive Multilevel Substructuring Technique to Model CMOS Micromachined Thermistor Gas Sensor, Part (I): A Feasibility Study. - Khaled Sadek; Walied A. Moussa (ICMENS, 2003)

Application of Adaptive Multilevel Substructuring Technique to Model CMOS Micromachined Thermistor Gas Sensor, Part (II): Effect of Manufacturing Uncertainties in the Reliability of MEMS. - Khaled Sadek; Walied A. Moussa (ICMENS, 2003)

Finite-Element Modeling of Shape Memory Alloy Components in Smart Structures, Part II: Application on Shape-Memory-Alloy - Embedded Smart Composite for Self-Damage Control. - M. Y. Serry; Walied A. Moussa; D. W. Raboud (ICMENS, 2003)

Finite-Element Modeling of Shape Memory Alloy Components in Smart Structures, Part I: Non-Linear Coupled Field Finite Element Procedure. - M. Y. Serry; D. W. Raboud; Walied A. Moussa (ICMENS, 2003)

A High-Load Stress Sensor for Scoliosis Surgery Application. - D. Benfield; Walied A. Moussa; Edmond Lou (ICMENS, 2004)

Finite Element Modeling of a Hydrogel Micro-Valve for Fluid Control inside Microfluidic Channels. - A. W. M. Ibrahim; Walied A. Moussa (ICMENS, 2004)

A Numerical Investigation of an Electrostatic-Peristaltic Colloidal Micro Pump. - Noor Quddus; S. Bhattacharjee; Walied A. Moussa (ICMENS, 2004)

Assessment of the Effect of Micro-Fabrication Uncertainties on the Sensitivity of Gas Sensors Using 3-D Finite Element Modeling. - Khaled Sadek; Walied A. Moussa (ICMENS, 2004)

Thermally Induced Fiber Deformation Using High Frequency Magnetic Field. - Yuhui Shang; Warren H. Finlay; Walied A. Moussa (ICMENS, 2004)

Investigation of a 3-D Capacitor Micro Strain Gauge for Applications in Biomedical and Industrial Health Monitoring. - Mohsen Shavandi; Walied A. Moussa (ICMENS, 2004)

Hydrogel Microvalve Device Modeling and Simulation. - Ibrahim M. W. A; Saunders J. R.; Walied A. Moussa (ICMENS, 2005)

Verifying Finite Element Simulation for a Piezoresistive MEMS Sensor. - D. Benfield; Walied A. Moussa; Edmond Lou (ICMENS, 2005)

ANN Modeling of Micro-Machined Gas Sensor Signals. - Mohamed Gamal El-Din; Walied A. Moussa (ICMENS, 2005)

A Parametric Study of Thermal Effects on the Reliability of RF MEMS Switches. - Jonathan Lueke; Noor Al Quddus; Walied A. Moussa; Aman Chahal (ICMENS, 2005)

Design and Simulation of One-Port Resonant- Piezoresistive Strain Sensor. - Ahmed A. S. Mohammed; Walied A. Moussa (ICMENS, 2005)

Electrokinetic Flow in a Wavy Channel. - Noor Al Quddus; Subir Bhattacharjee; Walied A. Moussa (ICMENS, 2005)

MEMS Design for Fabrication. - Khaled Sadek; Walied A. Moussa (ICMENS, 2005)

Mechanical Strain Measurements Using Semiconductor Piezoresistive Material. - Ahmed A. S. Mohammed; Walied A. Moussa; Edmond Lou (ICMENS, 2006)

A Reduced Three Dimensional Model for SAW Sensors Using Finite Element Analysis. - Mohamed M. El Gowini; Walied A. Moussa (Sensors, 2009)

A Coupled Field Multiphysics Modeling Approach to Investigate RF MEMS Switch Failure Modes under Various Operational Conditions. - Khaled Sadek; Jonathan Lueke; Walied A. Moussa (Sensors, 2009)

Scheduled Access Using the IEEE 802.15.4 Guaranteed Time Slots. - M. Takaffoli; Ehab S. Elmallah; Walied A. Moussa (ICC, 2010)

A Finite Element Model of a MEMS-based Surface Acoustic Wave Hydrogen Sensor. - Mohamed M. El Gowini; Walied A. Moussa (Sensors, 2010)

MEMS-Based Power Generation Techniques for Implantable Biosensing Applications. - Jonathan Lueke; Walied A. Moussa (Sensors, 2011)

High-Performance Piezoresistive MEMS Strain Sensor with Low Thermal Sensitivity. - Ahmed A. S. Mohammed; Walied A. Moussa; Edmond Lou (Sensors, 2011)

A Flexible Base Electrode Array for Intraspinal Microstimulation. - Imad Khaled; Salma Elmallah; Cheng Cheng; Walied A. Moussa; Vivian K. Mushahwar; Anastasia L. Elias (IEEE Trans. Biomed. Eng., 2013)

Fabrication process suitability ranking for micro-electro-mechanical systems using a fuzzy inference system. - Tetsuhei Nakashima-Paniagua; John Doucette 001; Walied A. Moussa (Expert Syst. Appl., 2014)

A Study of the Effect of the Fringe Fields on the Electrostatic Force in Vertical Comb Drives. - Else Gallagher; Walied A. Moussa (Sensors, 2014)

Numerical Characterization of Quasi-Static Ultrasound Elastography for the Detection of Deep Tissue Injuries. - Kenton Hamaluik; Walied A. Moussa; Martin Ferguson-Pell (IEEE Trans. Medical Imaging, 2014)

Investigating the vibration-based energy harvester characteristics to obtain maximum efficiency for an electrical interface. - Ahmed O. Badr; Jonathan Lueke; Walied A. Moussa; Ying Yin Tsui; Edmond Lou (CCECE, 2015)

Microfabrication and Integration of a Sol-Gel PZT Folded Spring Energy Harvester. - Jonathan Lueke; Ahmed O. Badr; Edmond Lou; Walied A. Moussa (Sensors, 2015)

Process specification language for management of MEMS device development - a step towards standardisation. - Tetsuhei Nakashima-Paniagua; John Doucette 001; Walied A. Moussa (Int. J. Manuf. Technol. Manag., 2016)

A High Efficiency AC/DC NVC-PSSHI Electrical Interface for Vibration-Based Energy Harvesters. - Ahmed O. Badr; Edmond Lou; Ying Yin Tsui; Walied A. Moussa (IEEE Trans. Circuits Syst. I Regul. Pap., 2020)

A Multiaxis Force Sensor Based on Pre-Strained Piezoresistive Film Strips. - Shichao Yue; Minzhi Xu; Yanpeng Gu; Walied A. Moussa (IEEE Access, 2023)