An integration design optimization framework of robust design, axiomatic design, and reliability-based design. - Lijuan Shen; Jun Yang 018; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2011)

Simultaneous Optimization of Robust Parameter and Tolerance Design Based on Generalized Linear Models. - Lijuan Shen; Jun Yang 018; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2013)

Generalized moment-independent importance measures based on Minkowski distance. - Qingqing Zhai; Jun Yang 018; Min Xie 001; Yu Zhao 003 (Eur. J. Oper. Res., 2014)

Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study. - Qingqing Zhai; Jun Yang 018; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2014)

Research on multi-stage manufacturing process reliability improvement. - Xiaonan Wu; Wei Dai 005; Yu Zhao 003; Fen Kuang; Guixiu Luo (INDIN, 2015)

An Adjustment to the Bartlett's Test for Small Sample Size. - Xiaobing Ma 001; Feng-Chun Lin; Yu Zhao 003 (Commun. Stat. Simul. Comput., 2015)

Reliability modelling and verification of manufacturing processes based on process knowledge management. - Wei Dai 005; Paul G. Maropoulos; Yu Zhao 003 (Int. J. Comput. Integr. Manuf., 2015)

A Study of Optimal Component Order in a General 1-Out-of-n Warm Standby System. - Qingqing Zhai; Jun Yang 001; Rui Peng 001; Yu Zhao 003 (IEEE Trans. Reliab., 2015)

Degradation-shock-based Reliability Models for Fault-tolerant Systems. - Zhenyu Liu 004; Xiaobing Ma 001; Lijuan Shen; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2016)

A delay time model for a mission-based system subject to periodic and random inspection and postponed replacement. - Li Yang 004; Xiaobing Ma 001; Qingqing Zhai; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2016)

Reliability evaluation of linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps. - Huan Yu 008; Jun Yang 018; Rui Peng 001; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2016)

Measurement errors in degradation-based burn-in. - Qingqing Zhai; Zhi-Sheng Ye 001; Jun Yang 018; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2016)

Reliability Demonstration for Long-Life Products Based on Hardened Testing Method and Gamma Process. - Jianchun Zhang; Xiaobing Ma 001; Yu Zhao 003 (IEEE Access, 2017)

A condition-based maintenance model for a three-state system subject to degradation and environmental shocks. - Li Yang 004; Xiaobing Ma 001; Yu Zhao 003 (Comput. Ind. Eng., 2017)

Reliability evaluation of non-repairable phased-mission common bus systems with common cause failures. - Huan Yu 008; Jun Yang 018; Jing Lin 003; Yu Zhao 003 (Comput. Ind. Eng., 2017)

Equivalence analysis of accelerated degradation mechanism based on stochastic degradation models. - Han Wang 013; Yu Zhao 003; Xiaobing Ma 001; Li Yang 004 (Qual. Reliab. Eng. Int., 2017)

An inspection model for a multi-component system subject to 2 types of failures. - Li Yang 004; Yu Zhao 003; Xiaobing Ma 001 (Qual. Reliab. Eng. Int., 2017)

Optimal design of constant-stress accelerated degradation tests using the M-optimality criterion. - Han Wang 013; Yu Zhao 003; Xiaobing Ma 001; Hongyu Wang (Reliab. Eng. Syst. Saf., 2017)

A preventive maintenance policy based on dependent two-stage deterioration and external shocks. - Li Yang 004; Xiaobing Ma 001; Rui Peng 001; Qingqing Zhai; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2017)

A Stress-Strength Time-Varying Correlation Interference Model for Structural Reliability Analysis Using Copulas. - Jianchun Zhang; Xiaobing Ma 001; Yu Zhao 003 (IEEE Trans. Reliab., 2017)

A Multi-objective Framework for Designing Accelerated Degradation Tests Under Wiener Process Model. - Han Wang 013; Yu Zhao 003; Xiaobing Ma 001 (IEEM, 2018)

Time-dependent Reliability Modelling Method Based on Load-strength Model in the Presence of Environmental Effects. - Jianchun Zhang; Yu Zhao 003; Xiaobing Ma 001 (IEEM, 2018)

An Extended Model for Fatigue Life Prediction and Acceleration Considering Load Frequency Effect. - Yikun Cai; Yu Zhao 003; Xiaobing Ma 001; Zhenyu Yang 003; Ying Ding (IEEE Access, 2018)

Mechanism Equivalence in Designing Optimum Step-Stress Accelerated Degradation Test Plan Under Wiener Process. - Han Wang 013; Yu Zhao 003; Xiaobing Ma 001 (IEEE Access, 2018)

Remaining Useful Life Prediction Using a Novel Two-Stage Wiener Process With Stage Correlation. - Hongyu Wang; Yu Zhao 003; Xiaobing Ma 001 (IEEE Access, 2018)

Multi-level maintenance strategy of deteriorating systems subject to two-stage inspection. - Li Yang 004; Yu Zhao 003; Xiaobing Ma 001 (Comput. Ind. Eng., 2018)

Screening Scheme Evaluation of the Assembly Process Based on the Stress-Strength Model and Defect Stream Analysis. - Yubing Huang; Wei Dai 005; Lianxi Liu; Yu Zhao 003 (Entropy, 2018)

Uncertainty Evaluation in Multistage Assembly Process Based on Enhanced OOPN. - Yubing Huang; Wei Dai 005; Weiping Mou; Yu Zhao 003 (Entropy, 2018)

Hybrid preventive maintenance of competing failures under random environment. - Li Yang 004; Yu Zhao 003; Rui Peng 001; Xiaobing Ma 001 (Reliab. Eng. Syst. Saf., 2018)

Research on the Propagation of Defects in Assembly Process Based on SIR Epidemic Model. - Mengyao Wu; Wei Dai 005; Yu Zhao 003 (ICPHM, 2019)

The Analysis of Defect Emergence in Assembly Process Based on the Discrete-Time SIRS Model. - Mengyao Wu; Wei Dai 005; Yubing Huang; Yu Zhao 003 (IEEE Access, 2019)

A Novel Approach to Support Failure Mode, Effects, and Criticality Analysis Based on Complex Networks. - Lixiang Wang; Wei Dai 005; Guixiu Luo; Yu Zhao 003 (Entropy, 2019)

The Method for Risk Evaluation in Assembly Process based on the Discrete-Time SIRS Epidemic Model and Information Entropy. - Mengyao Wu; Wei Dai 005; Zhiyuan Lu; Yu Zhao 003; Meiqing Wang (Entropy, 2019)

A novel pseudo-maximum likelihood estimation method for accelerated degradation tests under Wiener process. - Han Wang 013; Yu Zhao 003; Xiaobing Ma 001; Zhihua Wang 004 (Qual. Reliab. Eng. Int., 2019)

A new reliability analysis method for load-sharing k-out-of-n: F system based on load-strength model. - Jianchun Zhang; Yu Zhao 003; Xiaobing Ma 001 (Reliab. Eng. Syst. Saf., 2019)

Reliability Evaluation for Manufacturing System Based on Dynamic Adaptive Fuzzy Reasoning Petri Net. - Lixiang Wang; Wei Dai 005; Jun Ai; Weiwei Duan; Yu Zhao 003 (IEEE Access, 2020)

Risk Evaluation for a Manufacturing Process Based on a Directed Weighted Network. - Lixiang Wang; Wei Dai 005; Dongmei Sun; Yu Zhao 003 (Entropy, 2020)

Dynamic maintenance strategy with iteratively updated group information. - Tianyi Wu; Li Yang 004; Xiaobing Ma 001; Zihan Zhang; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2020)

Reliability modeling methods for load-sharing k-out-of-n system subject to discrete external load. - Jianchun Zhang; Yu Zhao 003; Xiaobing Ma 001 (Reliab. Eng. Syst. Saf., 2020)

Reliability Modeling and Rework Strategy Evaluation of Manufacturing System based on Stochastic-flow Network. - Qinglin Zheng; Weiwei Duan; Wei Dai 005; Yu Zhao 003 (IEEM, 2022)

Generally weighted moving average control chart for monitoring two-parameter exponential distribution with measurement errors. - Qi Li; Jun Yang 018; Shuo Huang; Yu Zhao 003 (Comput. Ind. Eng., 2022)

Jointly Optimizing Production, Quality Inspection and Maintenance Policies for an Unreliable Production System. - Qi Li; Jun Yang; Ning Wang; Hao Xing; Yu Zhao 003 (IEEM, 2023)

Reliability acceptance sampling plan for degraded products subject to Wiener process with unit heterogeneity. - Huiling Zheng; Jun Yang 018; Houbao Xu; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2023)

Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity. - Huiling Zheng; Jun Yang 018; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2023)

Condition-based maintenance management for two-stage continuous deterioration with two-dimensional inspection errors. - Jiantai Wang; Xiaobing Ma 001; Kaiye Gao; Yu Zhao 003; Li Yang 004 (Qual. Reliab. Eng. Int., 2024)

A Collaborative Replacement-Spare Provision Policy for Three-State System Considering Inspection Errors. - Jiantai Wang; Yu Zhao 003; Xiaobing Ma 001; Li Yang 004 (ISSSR, 2025)

Accelerated Degradation Data Analysis Based on Gamma Process With Random Effects. - Huiling Zheng; Jun Yang 018; Wenda Kang; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2025)