Investigating the Non-Linear Behaviors of Rub-Impact Rotor System with wavelet Scalogram. - Zhike Peng; Y. Y. He; Q. Lu; Wenxiu Lu; Fulei Chu (WAA, 2003)

Polynomial Chirplet Transform With Application to Instantaneous Frequency Estimation. - Zhike Peng; Guang Meng; Fulei Chu; Zi-Qiang Lang; Wenming Zhang; Yang Yang 119 (IEEE Trans. Instrum. Meas., 2011)

Spline-Kernelled Chirplet Transform for the Analysis of Signals With Time-Varying Frequency and Its Application. - Yang Yang 119; Zhike Peng; Guang Meng; Wenming Zhang (IEEE Trans. Ind. Electron., 2012)

Multicomponent Signal Analysis Based on Polynomial Chirplet Transform. - Yang Yang 119; Wenming Zhang; Zhike Peng; Guang Meng (IEEE Trans. Ind. Electron., 2013)

Steady-state response of a geared rotor system with slant cracked shaft and time-varying mesh stiffness. - Qinkai Han; Jing-Shan Zhao; Wenxiu Lu; Zhike Peng; Fulei Chu (Commun. Nonlinear Sci. Numer. Simul., 2014)

Modeling of the Through-the-Thickness Electric Potentials of a Piezoelectric Bimorph Using the Spectral Element Method. - Xingjian Dong; Zhike Peng; Hongxing Hua; Guang Meng (Sensors, 2014)

Application of Parameterized Time-Frequency Analysis on Multicomponent Frequency Modulated Signals. - Yang Yang 119; Zhike Peng; Xingjian Dong; Wenming Zhang; Guang Meng (IEEE Trans. Instrum. Meas., 2014)

General Parameterized Time-Frequency Transform. - Yang Yang 119; Zhike Peng; Xingjian Dong; Wenming Zhang; Guang Meng (IEEE Trans. Signal Process., 2014)

Wind turbine condition monitoring by detecting the transient period of a single generator stator current signal. - Wenxian Yang; Sunny W. Tian; Zhike Peng (I2MTC, 2015)

A new nonlinear dynamic model of the rotor-bearing system considering preload and varying contact angle of the bearing. - Xuening Zhang; Qinkai Han; Zhike Peng; Fulei Chu (Commun. Nonlinear Sci. Numer. Simul., 2015)

A novel damage detection approach by using Volterra kernel functions based analysis. - C. M. Cheng; Zhike Peng; Xingjian Dong; Wenming Zhang; Guang Meng (J. Frankl. Inst., 2015)

Tunable Micro- and Nanomechanical Resonators. - Wenming Zhang; Kai-Ming Hu; Zhike Peng; Guang Meng (Sensors, 2015)

Component Extraction for Non-Stationary Multi-Component Signal Using Parameterized De-chirping and Band-Pass Filter. - Yang Yang 119; Xingjian Dong; Zhike Peng; Wenming Zhang; Guang Meng (IEEE Signal Process. Lett., 2015)

Time-Varying Frequency-Modulated Component Extraction Based on Parameterized Demodulation and Singular Value Decomposition. - Shiqian Chen; Yang Yang 119; Kexiang Wei; Xingjian Dong; Zhike Peng; Wenming Zhang (IEEE Trans. Instrum. Meas., 2016)

Intrinsic chirp component decomposition by using Fourier Series representation. - Shiqian Chen; Zhike Peng; Yang Yang 119; Xingjian Dong; Wenming Zhang (Signal Process., 2017)

Chirplet Path Fusion for the Analysis of Time-Varying Frequency-Modulated Signals. - Shiqian Chen; Xingjian Dong; Yang Yang 119; Wenming Zhang; Zhike Peng; Guang Meng (IEEE Trans. Ind. Electron., 2017)

Parameterized model based blind intrinsic chirp source separation. - Peng Zhou 016; Yang Yang 119; Shiqian Chen; Zhike Peng; Khandaker Noman; Wenming Zhang (Digit. Signal Process., 2018)

Impulse response function identification of linear mechanical systems based on Kautz basis expansion with multiple poles. - Changming Cheng; Zhike Peng; Xingjian Dong; Wenming Zhang; Guang Meng (Int. J. Syst. Sci., 2018)

Parameterized model based Short-time chirp component decomposition. - Peng Zhou 016; Xingjian Dong; Shiqian Chen; Zhike Peng; Wenming Zhang (Signal Process., 2018)

Vision-Based Measurement System for Instantaneous Rotational Speed Monitoring Using Linearly Varying-Density Fringe Pattern. - Jianfeng Zhong; Shuncong Zhong; Qiukun Zhang; Zhike Peng; Shulin Liu; Yingjie Yu (IEEE Trans. Instrum. Meas., 2018)

Combining Spatial Filtering and Sparse Filtering for Coaxial-Moving Sound Source Separation, Enhancement and Fault Diagnosis. - Wei Xiong; Qingbo He; Kesai Ouyang; Zhike Peng (IEEE Access, 2019)

Frequency-domain intrinsic component decomposition for multimodal signals with nonlinear group delays. - Zhen Liu; Qingbo He; Shiqian Chen; Xingjian Dong; Zhike Peng; Wenming Zhang (Signal Process., 2019)

Consistent Variable Selection for a Nonparametric Nonlinear System by Inverse and Contour Regressions. - Changming Cheng; Er-Wei Bai; Zhike Peng (IEEE Trans. Autom. Control., 2019)

Warped Variational Mode Decomposition With Application to Vibration Signals of Varying-Speed Rotating Machineries. - Shiqian Chen; Yang Yang 119; Xingjian Dong; Guanpei Xing; Zhike Peng; Wenming Zhang (IEEE Trans. Instrum. Meas., 2019)

Doppler Distortion Removal in Wayside Circular Microphone Array Signals. - Kesai Ouyang; Wei Xiong; Qingbo He; Zhike Peng (IEEE Trans. Instrum. Meas., 2019)

Full-Range Line-Field Optical Coherence Tomography for High-Accuracy Measurements of Optical Lens. - Bo Fang; Shuncong Zhong; Qiukun Zhang; Jianfeng Zhong; Qiben Lin; Yingjie Yu; Zhike Peng (IEEE Trans. Instrum. Meas., 2020)

Time-Varying Motion Filtering for Vision-Based Nonstationary Vibration Measurement. - Zhen Liu; Qingbo He; Shiqian Chen; Zhike Peng; Wenming Zhang (IEEE Trans. Instrum. Meas., 2020)

Differential Enhancement Method for Robust and Accurate Heart Rate Monitoring via Microwave Vital Sign Sensing. - Yuyong Xiong; Zhike Peng; Changzhan Gu; Songxu Li; Dong Wang 001; Wenming Zhang (IEEE Trans. Instrum. Meas., 2020)

Detecting the Early Damages in Structures With Nonlinear Output Frequency Response Functions and the CNN-LSTM Model. - Baoxuan Zhao; Changming Cheng; Zhike Peng; Xingjian Dong; Guang Meng (IEEE Trans. Instrum. Meas., 2020)

Acoustic-Excitation Optical Coherence Vibrometer for Real-Time Microstructure Vibration Measurement and Modal Analysis. - Ning Zhou; Shuncong Zhong; Jiewen Lin; Manting Luo; Walter Nsengiyumva; Zhike Peng; Yingjie Yu (IEEE Trans. Instrum. Meas., 2020)

Theoretical and Experimental Investigations on Spectral Lp/Lq Norm Ratio and Spectral Gini Index for Rotating Machine Health Monitoring. - Dong Wang 001; Zhike Peng; Lifeng Xi (IEEE Trans Autom. Sci. Eng., 2021)

Adaptive Weighted Signal Preprocessing Technique for Machine Health Monitoring. - Bingchang Hou; Dong Wang 001; Yi Wang 043; Tongtong Yan; Zhike Peng; Kwok-Leung Tsui (IEEE Trans. Instrum. Meas., 2021)

Time-Varying Envelope Filtering for Exhibiting Space Bearing Cage Fault Features. - Sha Wei; Dong Wang 001; Hong Wang; Zhike Peng (IEEE Trans. Instrum. Meas., 2021)

Definition of Signal-to-Noise Ratio of Health Indicators and Its Analytic Optimization for Machine Performance Degradation Assessment. - Tongtong Yan; Dong Wang 001; Jin-Zhen Kong; Tangbin Xia; Zhike Peng; Lifeng Xi (IEEE Trans. Instrum. Meas., 2021)

Hybrid Pre-Training Strategy for Deep Denoising Neural Networks and Its Application in Machine Fault Diagnosis. - Baoxuan Zhao; Changming Cheng; Zhike Peng; Qingbo He; Guang Meng (IEEE Trans. Instrum. Meas., 2021)

TFN: An Interpretable Neural Network with Time-Frequency Transform Embedded for Intelligent Fault Diagnosis. - Qian Chen; Xingjian Dong; Guowei Tu; Dong Wang 001; Baoxuan Zhao; Zhike Peng (CoRR, 2022)

Microwave Vibrometry: Noncontact Vibration and Deformation Measurement Using Radio Signals. - Songxu Li; Yuyong Xiong; Gaoyang Wu; Zesheng Ren; Guang Meng; Zhike Peng (IEEE Instrum. Meas. Mag., 2022)

Identification of Sparse Volterra Systems: An Almost Orthogonal Matching Pursuit Approach. - Changming Cheng; Er-Wei Bai; Zhike Peng (IEEE Trans. Autom. Control., 2022)

Interactive Visual Simulation Modeling for Structural Response Prediction and Damage Detection. - Zhen Liu; Qingbo He; Zhike Peng (IEEE Trans. Ind. Electron., 2022)

OSESgram: Data-Aided Method for Selection of Informative Frequency Bands for Bearing Fault Diagnosis. - Bingchang Hou; Yikai Chen; Hong Wang; Zhike Peng; Kwok-Leung Tsui; Dong Wang 001 (IEEE Trans. Instrum. Meas., 2022)

Swept-Source Optical Coherence Vibrometer: Principle and Applications. - Jiewen Lin; Shuncong Zhong; Qiukun Zhang; Jianfeng Zhong; Walter Nsengiyumva; Zhike Peng (IEEE Trans. Instrum. Meas., 2022)

Relation-Aware Attentive Neural Processes Model for Remaining Useful Life Prediction. - Junzhong Lu; Changming Cheng; Baoxuan Zhao; Zhike Peng (IEEE Trans. Instrum. Meas., 2022)

Multiple Frequency Modulation Components Detection and Decomposition for Rotary Machine Fault Diagnosis. - Xiaoluo Yu; Yang Yang 119; Qingbo He; Minggang Du; Zhike Peng (IEEE Trans. Instrum. Meas., 2022)

An Instance and Feature-Based Hybrid Transfer Model for Fault Diagnosis of Rotating Machinery With Different Speeds. - Baoxuan Zhao; Changming Cheng; Guanzhen Zhang; Miaomiao Lin; Zhike Peng; Guang Meng (IEEE Trans. Instrum. Meas., 2022)

Generic Framework for Integration of First Prediction Time Detection With Machine Degradation Modelling from Frequency Domain. - Tongtong Yan; Dong Wang 001; Bingchang Hou; Zhike Peng (IEEE Trans. Reliab., 2022)

Parameterized Resampling Time-Frequency Transform. - Tianqi Li; Qingbo He; Zhike Peng (IEEE Trans. Signal Process., 2022)

An Unsupervised Condition Monitoring Method for Rolling Bearings Based on Compound Feature Selection and Multistep-Aware BiGRU-VAE. - Xinyu Li; Changming Cheng; Guanzhen Zhang; Zhike Peng (IEEE Trans. Instrum. Meas., 2023)

Near-Field Micro-Doppler Effect and Spectrum Characteristics of Rotating Targets: Theoretical Analysis and Parameter Estimation Method. - Weitao Li; Yuyong Xiong; Cunju Wei; Pengfei Chen; Dan Liang; Zhike Peng (IEEE Trans. Instrum. Meas., 2023)

Super-Resolution and Accurate Full-Field Displacement Measurement With Millimeter-Wave Radars. - Zhaoyu Liu; Yuyong Xiong; Gaoyang Wu; Guang Meng; Zhike Peng (IEEE Trans. Instrum. Meas., 2023)

Semisupervised Fault Diagnosis of Gearbox Using Weighted Graph-Based Label Propagation and Virtual Adversarial Training. - Duo Shan; Changming Cheng; Lingjian Li; Zhike Peng; Qingbo He (IEEE Trans. Instrum. Meas., 2023)

Scanning Microwave Vibrometer: Full-Field Vibration Measurement via Microwave Sensing With Phase-Encoded Beam Scanning. - Yuyong Xiong; Zhaoyu Liu; Songxu Li; Guang Meng; Zhike Peng (IEEE Trans. Instrum. Meas., 2023)

A Nonlinearity-Sensitive Approach for Early Damage Detection Using NOFRFs and the Hybrid-LSTM Model. - Shangyu Zhao; Changming Cheng; Guanzhen Zhang; Miaomiao Lin; Zhike Peng; Guang Meng (IEEE Trans. Instrum. Meas., 2023)

Hybrid Semi-Supervised Learning for Rotating Machinery Fault Diagnosis Based on Grouped Pseudo Labeling and Consistency Regularization. - Baoxuan Zhao; Changming Cheng; Shangyu Zhao; Zhike Peng (IEEE Trans. Instrum. Meas., 2023)

New Shapeness Property and Its Convex Optimization Model for Interpretable Machine Degradation Modeling. - Tongtong Yan; Dong Wang 001; Tangbin Xia; Ershun Pan; Zhike Peng; Lifeng Xi (IEEE Trans. Reliab., 2023)

Parameterized Domain Mapping for Order Tracking of Rotating Machinery. - Tianqi Li; Zhike Peng; Hao Xu; Qingbo He (IEEE Trans. Ind. Electron., 2023)

A two-phase-based deep neural network for simultaneous health monitoring and prediction of rolling bearings. - Rui Bai; Khandaker Noman; Ke Feng; Zhike Peng; Yongbo Li (Reliab. Eng. Syst. Saf., 2023)

Varying Wave-Shape Component Decomposition: Algorithm and Applications. - Sha Wei; Yang Yang 119; Minggang Du; Qingbo He; Zhike Peng (IEEE Trans. Ind. Electron., 2023)

Dynamic Model-Embedded Intelligent Machine Fault Diagnosis Without Fault Data. - Xiaoluo Yu; Yang Yang 119; Minggang Du; Qingbo He; Zhike Peng (IEEE Trans. Ind. Informatics, 2023)

ScenePhotographer: Object-Oriented Photography for Residential Scenes. - Shao-Kui Zhang; Hanxi Zhu; Xuebin Chen; Jinghuan Chen; Zhike Peng; Ziyang Chen; Yong-Liang Yang 002; Song-Hai Zhang (ACM Multimedia, 2024)

Interpreting what typical fault signals look like via prototype-matching. - Qian Chen; Xingjian Dong; Zhike Peng (Adv. Eng. Informatics, 2024)

A feature extension and reconstruction method with incremental learning capabilities under limited samples for intelligent diagnosis. - Kui Hu; Zhihao Bi; Qingbo He; Zhike Peng (Adv. Eng. Informatics, 2024)

Adaptive Fault Components Extraction by Using an Optimized Weights Spectrum Based Index for Machinery Fault Diagnosis. - Bingchang Hou; Dong Wang 001; Zhike Peng; Kwok-Leung Tsui (IEEE Trans. Ind. Electron., 2024)

Robust Separation-Enhanced NRC Method for Multiple Periodicity Detection: Applications in Bearing Compound Fault Diagnosis. - Saisai Chen; Wei Fan 008; Yuyong Xiong; Zhike Peng (IEEE Trans. Instrum. Meas., 2024)

3-D Microwave Displacement Sensor: 3-D Displacement Measurement Using a Single Microwave Transceiver. - Yingjie Gou; Yuyong Xiong; Zesheng Ren; Guang Meng; Zhike Peng (IEEE Trans. Instrum. Meas., 2024)

Simultaneous Measurement of Blade Tip Clearance and Blade Tip Timing With Microwave Sensor. - Weitao Li; Yuyong Xiong; Pengfei Chen; Cunju Wei; Dan Liang; Wei Fan 008; Zhike Peng (IEEE Trans. Instrum. Meas., 2024)

Displacement Measurement of Weak Targets With Imaging Radar. - Zhaoyu Liu; Yuyong Xiong; Wendi Tian; Guang Meng; Zhike Peng (IEEE Trans. Instrum. Meas., 2024)

mmAcoustic: Full-Field Sound Source Localization, Identification, and Area-Selectable Sound Recovery via Millimeter-Wave Vibration Monitoring. - Yuyong Xiong; Xiangyi Tang; Songxu Li; Haibin Meng; Dong Wang 001; Guang Meng; Zhike Peng (IEEE Trans. Instrum. Meas., 2024)

Multichannel Fault Diagnosis of Planetary Gearbox via Difference-Average Symbol Transition Entropy and Twin Support Higher-Order Tensor Machine. - Cheng Yang; Qingbo He; Zhinong Li; Minping Jia; Moncef Gabbouj; Zhike Peng (IEEE Trans. Instrum. Meas., 2024)

Adaptive incremental diagnosis model for intelligent fault diagnosis with dynamic weight correction. - Kui Hu; Qingbo He; Changming Cheng; Zhike Peng (Reliab. Eng. Syst. Saf., 2024)

Spatial-Vibration-Modulation-Assisted Blade Damage Localization for Industrial Quadrotor UAVs. - Xinxin Liao; Tianxi Jiang; Chong Li; Xiaoluo Yu; Zhike Peng; Qingbo He (IEEE Trans. Ind. Electron., 2024)

Online Piecewise Convex-Optimization Interpretable Weight Learning for Machine Life Cycle Performance Assessment. - Tongtong Yan; Dong Wang 001; Tangbin Xia; Ershun Pan; Zhike Peng; Lifeng Xi (IEEE Trans. Neural Networks Learn. Syst., 2024)

Adaptive Two-Stage Model for Bearing Remaining Useful Life Prediction Using Gaussian Process Regression With Matched Kernels. - Xinyu Zheng; Wei Fan 008; Chao Chen 034; Zhike Peng (IEEE Trans. Reliab., 2024)

An Effective Pipeline Vibration Trend Prediction Method Based on Adaptive Chirp Mode Decomposition and Long Short-Term Neural Networks. - Tao Qi; Yong Wang; Zhike Peng (IEEE Access, 2025)

An interpretable deep feature aggregation framework for machinery incremental fault diagnosis. - Kui Hu; Qian Chen; Jintao Yao; Qingbo He; Zhike Peng (Adv. Eng. Informatics, 2025)

Hierarchical pseudo-label co-calibration with prototypical decision boundary optimization for mechanical fault diagnosis in label-scarce scenarios. - Xinyu Li; Changming Cheng; Zhike Peng (Adv. Eng. Informatics, 2025)

A Hilbert-based physics-informed neural network for instantaneous meshing frequency estimation of planetary gear set. - Shunan Luo; Yinbo Wang; He Dai; Xinhua Long; Zhike Peng (Adv. Eng. Informatics, 2025)

Model and network dual-driven fault diagnosis framework for canned motor pumps under imbalanced data. - Taibo Yang; Jintao Yao; Jiaxin Liu; Qingbo He; Zhike Peng (Adv. Eng. Informatics, 2025)

Parameterized demodulation-based sliding singular spectrum analysis for multi-component non-stationary signal decomposition. - Jixu Zhang; Tianqi Li; Binghuan Yu; Qingbo He; Zhike Peng; Fangyong Wang (Digit. Signal Process., 2025)

Enhanced mmWave Radar Sound Sensing: A Passive Relay for Long-Range, Source-Independent Sound Acquisition. - Haibin Meng; Yuyong Xiong; Wendi Tian; Xiangyi Tang; Qingbo He; Zhike Peng (IEEE Internet Things J., 2025)

Dynamic domain adaptive ensemble for intelligent fault diagnosis of machinery. - Kui Hu; Qingbo He; Hao Xu; Changming Cheng; Zhike Peng (Knowl. Based Syst., 2025)

Label-guided contrastive learning with weighted pseudo-labeling: A novel mechanical fault diagnosis method with insufficient annotated data. - Xinyu Li; Changming Cheng; Zhike Peng (Reliab. Eng. Syst. Saf., 2025)

Super Fourier analysis: A highly efficient framework for multivariate signal processing. - Tianqi Li; Nan Chen 002; Zhike Peng; Qingbo He (Signal Process., 2025)

A Hankel Matrix-Based Multivariate Control Chart With Shrinkage Estimator for Condition Monitoring of Rolling Bearings. - Wei Fan 008; Fan Jiang; Yongxiang Li; Zhike Peng (IEEE Trans Autom. Sci. Eng., 2025)

Robust Vision-Based Target Outline Reconstruction and In-Plane Trajectory Measurement. - Sicheng Hong; Yuyong Xiong; Yingjie Gou; Qingbo He; Zhike Peng (IEEE Trans. Instrum. Meas., 2025)

Frequency-Assisted Contrastive Learning With Cyclic Fine-Tuning for Rotating Machinery Fault Diagnosis Under Limited Labeled Data. - Xinyu Li; Changming Cheng; Zhike Peng (IEEE Trans. Instrum. Meas., 2025)

Adversarial Regularized Graph Autoencoder for Intelligent Anomaly Detection With Multisensor Signal Fusion. - Yingchun Li; Yu Sun 033; Xuefeng Chen 002; Qingbo He; Xinhua Long; Zhike Peng; Laihao Yang (IEEE Trans. Instrum. Meas., 2025)

Linear Array Sensor-Based Vision System for Shaft Radial Vibration Sensing Using Projection Fringe. - Dongming Liu; Jianfeng Zhong; Shoujiang Chi; Qiukun Zhang; Zhike Peng; Shuncong Zhong (IEEE Trans. Instrum. Meas., 2025)

CS-SHAP: Extending SHAP to Cyclic-Spectral Domain for Better Interpretability of Intelligent Fault Diagnosis. - Qian Chen; Xingjian Dong; Kui Hu; Kangkang Chen; Zhike Peng; Guang Meng (CoRR, 2025)

SHapley Estimated Explanation (SHEP): A Fast Post-Hoc Attribution Method for Interpreting Intelligent Fault Diagnosis. - Qian Chen; Xingjian Dong; Zhike Peng; Guang Meng (CoRR, 2025)