Bernardo Almada-Lobo

Orcid: 0000-0003-0815-1068

According to our database1, Bernardo Almada-Lobo authored at least 58 papers between 2008 and 2024.

Collaborative distances:



In proceedings 
PhD thesis 


Online presence:



Matheuristic for the lot-sizing and scheduling problem in integrated pulp and paper production.
Comput. Ind. Eng., 2024

A Memetic Algorithm for the multi-product Production Routing Problem.
Comput. Ind. Eng., August, 2023

Hybrid MCDM and simulation-optimization for strategic supplier selection.
Expert Syst. Appl., June, 2023

Robust supply chain design with suppliers as system integrators: an aerospace case study.
Int. J. Prod. Res., 2023

A Data-Driven Monitoring Approach for Diagnosing Quality Degradation in a Glass Container Process.
Proceedings of the Machine Learning, Optimization, and Data Science, 2023

A comprehensive framework and literature review of supplier selection under different purchasing strategies.
Comput. Ind. Eng., 2022

Improving picking performance at a large retailer warehouse by combining probabilistic simulation, optimization, and discrete-event simulation.
Int. Trans. Oper. Res., 2021

Integrating supplier selection with inventory management under supply disruptions.
Int. J. Prod. Res., 2021

Cooperative coevolution of expressions for (r, Q) inventory management policies using genetic programming.
Int. J. Prod. Res., 2020

Simultaneous lotsizing and scheduling considering secondary resources: a general model, literature review and classification.
OR Spectr., 2019

Tackling perishability in multi-level process industries.
Int. J. Prod. Res., 2019

Product-oriented time window assignment for a multi-compartment vehicle routing problem.
Eur. J. Oper. Res., 2019

Consistent vehicle routing problem with service level agreements: A case study in the pharmaceutical distribution sector.
Eur. J. Oper. Res., 2019

Designing new heuristics for the capacitated lot sizing problem by genetic programming.
Comput. Oper. Res., 2018

A computational study of the general lot-sizing and scheduling model under demand uncertainty via robust and stochastic approaches.
Comput. Oper. Res., 2018

Hybrid Genetic Algorithms Applied to the Glass Container Industry Problem.
Proceedings of the 2018 IEEE Congress on Evolutionary Computation, 2018

Integrated versus hierarchical approach to aggregate production planning and master production scheduling.
OR Spectr., 2017

An optimization-simulation approach to the network redesign problem of pharmaceutical wholesalers.
Comput. Ind. Eng., 2017

Decentralized Vs. Centralized Sequencing in a Complex Job-Shop Scheduling.
Proceedings of the Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing, 2017

Improving Convolutional Neural Network Design via Variable Neighborhood Search.
Proceedings of the Image Analysis and Recognition - 14th International Conference, 2017

Genetic algorithms approaches for the production planning in the glass container industry.
Proceedings of the Genetic and Evolutionary Computation Conference, 2017

Defining the Best Distribution Network for Grocery Retail Stores.
ERCIM News, 2016

A long-haul freight transportation problem: Synchronizing resources to deliver requests passing through multiple transshipment locations.
Eur. J. Oper. Res., 2016

Supplier selection in the processed food industry under uncertainty.
Eur. J. Oper. Res., 2016

Mathematical programming-based approaches for multi-facility glass container production planning.
Comput. Oper. Res., 2016

The Dial-a-Ride Problem with Split Requests and Profits.
Transp. Sci., 2015

A hybrid path-relinking method for solving two-stage stochastic integer problems.
Int. Trans. Oper. Res., 2015

Lead time considerations for the multi-level capacitated lot-sizing problem.
Eur. J. Oper. Res., 2015

Unequal individual genetic algorithm with intelligent diversification for the lot-scheduling problem in integrated mills using multiple-paper machines.
Comput. Oper. Res., 2015

A decision support system for the operational production planning and scheduling of an integrated pulp and paper mill.
Comput. Chem. Eng., 2015

Hybrid simulation-optimization methods: A taxonomy and discussion.
Simul. Model. Pract. Theory, 2014

Influence of consumer purchasing behaviour on the production planning of perishable food.
OR Spectr., 2014

Models for capacitated lot-sizing problem with backlogging, setup carryover and crossover.
J. Oper. Res. Soc., 2014

An Optimization based on Simulation Approach to the Patient Admission Scheduling Problem: Diagnostic Imaging Department Case Study.
J. Digit. Imaging, 2014

An optimization based on simulation approach to the patient admission scheduling problem using a linear programing algorithm.
J. Biomed. Informatics, 2014

Annual Distribution Budget in the Beverage Industry: A Case Study.
Interfaces, 2014

Modeling lotsizing and scheduling problems with sequence dependent setups.
Eur. J. Oper. Res., 2014

HOPS - Hamming-Oriented Partition Search for production planning in the spinning industry.
Eur. J. Oper. Res., 2014

An optimization approach for the lot sizing and scheduling problem in the brewery industry.
Comput. Ind. Eng., 2014

The impact of food perishability issues in the vehicle routing problem.
Comput. Ind. Eng., 2014

Pricing, relaxing and fixing under lot sizing and scheduling.
Eur. J. Oper. Res., 2013

Combining the principles of variable neighborhood decomposition search and the fix&optimize heuristic to solve multi-level lot-sizing and scheduling problems.
Comput. Oper. Res., 2013

A hybrid VNS approach for the short-term production planning and scheduling: A case study in the pulp and paper industry.
Comput. Oper. Res., 2013

Comparing models for lot-sizing and scheduling of single-stage continuous processes: Operations research and process systems engineering approaches.
Comput. Chem. Eng., 2013

Glass container production scheduling through hybrid multi-population based evolutionary algorithm.
Appl. Soft Comput., 2013

Predictive Production Planning in an Integrated Pulp and Paper Mill.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

Three time-based scale formulations for the two-stage lot sizing and scheduling in process industries.
J. Oper. Res. Soc., 2012

Annual production budget in the beverage industry.
Eng. Appl. Artif. Intell., 2012

Integrated pulp and paper mill planning and scheduling.
Comput. Ind. Eng., 2012

Classification of simulation-optimization methods.
Proceedings of the Winter Simulation Conference, 2012

Integrating Data Mining and Optimization Techniques on Surgery Scheduling.
Proceedings of the Advanced Data Mining and Applications, 8th International Conference, 2012

Capacitated lot-sizing and scheduling with sequence-dependent, period-overlapping and non-triangular setups.
J. Sched., 2011

Single and parallel machine capacitated lotsizing and scheduling: New iterative MIP-based neighborhood search heuristics.
Comput. Oper. Res., 2011

Simulating a Portuguese hospital master surgery schedule.
Proceedings of the 2011 IEEE 1st International Conference on Serious Games and Applications for Health, 2011

A Decision Support System for Surgery Theatre Scheduling Problems.
Proceedings of the ENTERprise Information Systems - International Conference, 2011

Infeasibility handling in genetic algorithm using nested domains for production planning.
Comput. Oper. Res., 2010

Multiple machine continuous setup lotsizing with sequence-dependent setups.
Comput. Optim. Appl., 2010

A note on "the capacitated lot-sizing and scheduling problem with sequence-dependent setup costs and setup times.
Comput. Oper. Res., 2008