Guifu Ding

According to our database1, Guifu Ding authored at least 25 papers between 2007 and 2019.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2019
A Minimally Invasive Hollow Microneedle With a Cladding Structure: Ultra-Thin but Strong, Batch Manufacturable.
IEEE Trans. Biomed. Eng., 2019

Palladium Sensitive Thin Film on Micro Hotplate for Fast Response/Recovery.
Proceedings of the 14th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2019

2018
A Flexible Pressure Sensor Based on Low-Cost Electroplated-Ni Film Induced Cracking for Wearable Devices Application.
Proceedings of the 13th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, 2018

Preparation, Characterization, Insulation Study of Al2O3 Thin Film Deposited by Dual Ion Beam Sputtering.
Proceedings of the 13th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, 2018

An All-Metal Hollow Microstructure for Pool-Boiling Chip-Integrated Cooling Based on Electroplating.
Proceedings of the 13th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems, 2018

2017
Design and Optimization of a Stationary Electrode in a Vertically-Driven MEMS Inertial Switch for Extending Contact Duration.
Sensors, 2017

Plastic analysis for through silicon via with actual etching defect of triangular-teeth and scallops.
Microelectron. Reliab., 2017

2016
Large Out-of-Plane Displacement Bistable Electromagnetic Microswitch on a Single Wafer.
Sensors, 2016

2015
Heat Transfer and Friction Characteristics of the Microfluidic Heat Sink with Variously-Shaped Ribs for Chip Cooling.
Sensors, 2015

2013
Design, Simulation, and Characterization of a Low-Cost In-Plane Spark Gap Microswitch With Dual-Trigger Electrode for Pulsed Power Applications.
IEEE Trans. Ind. Electron., 2013

Resin-bonded NdFeB micromagnets for integration into electromagnetic vibration energy harvesters.
J. Zhejiang Univ. Sci. C, 2013

2011
Design, fabrication and characterization of a bistable electromagnetic microrelay with large displacement.
Microelectron. J., 2011

2010
Design and implementation of a bistable microcantilever actuator for magnetostatic latching relay.
Microelectron. J., 2010

An electro-thermal SU-8 cantilever micro actuator based on bimorph effect.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

A quadruple-anchored RF-MEMS switch for switched-line phase shifters.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Modeling of a bistable MEMS mechanism with torsion/cantilever beams.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Design optimization of polymeric Out-of-plane electro-thermal actuator.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Effect of additives on mechanical properties of electroplating nickel.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Design and simulation of MEMS-based CPW-fed unidirectional antenna array with air bridges.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

A new electroplating mask for deep wet etching on glass.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

A latching bistable microswitch using dual-beam electrothermal actuation.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

A novel triode-type carbon nanotube field emission micro-cathode fabricated by using electrochemical and micromachining.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

Fabrication of spinneret for spinning non-circular microfiber based on UV-LIGA technique.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

2008
Fabrication of a MEMS inertia switch on quartz substrate and evaluation of its threshold acceleration.
Microelectron. J., 2008

2007
Design and fabrication of a magnetic bi-stable electromagnetic MEMS relay.
Microelectron. J., 2007


  Loading...