Hongkun Li

This page is a disambiguation page, it actually contains mutiple papers from persons of the same or a similar name.

Known people with the same name:

Bibliography

2024
Fault diagnosis of chemical process based on SE-ResNet-BiGRU neural network.
J. Intell. Fuzzy Syst., 2024

2023
Air quality prediction based on Long Short-Term Memory Model with advanced feature selection and hyperparameter optimization.
J. Intell. Fuzzy Syst., October, 2023

Trusted multi-source information fusion for fault diagnosis of electromechanical system with modified graph convolution network.
Adv. Eng. Informatics, August, 2023

A Fusing Domain Feature and Sharing Label Space-Based Fault Diagnosis Approach for Different Distribution and Unlabeled Rolling Bearing Sample.
IEEE Trans. Instrum. Meas., 2023

Research on Running Status Monitoring and Rotating Blade Crack Detection of Large-Scale Centrifugal Compressor Based on Blade Tip Timing Technique.
IEEE Trans. Instrum. Meas., 2023

2022
Intelligent Diagnosis of Rolling Element Bearing Based on Refined Composite Multiscale Reverse Dispersion Entropy and Random Forest.
Sensors, 2022

2021
Time-Frequency Sparse Reconstruction of Non-Uniform Sampling for Non-Stationary Signal.
IEEE Trans. Veh. Technol., 2021

Tool Wear Recognition Based on Deep Kernel Autoencoder With Multichannel Signals Fusion.
IEEE Trans. Instrum. Meas., 2021

An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades.
IEEE Trans. Instrum. Meas., 2021

Shifting Straight-Line Fitting Method to Calculate Blade Vibration Based on Blade Tip Timing.
IEEE Trans. Instrum. Meas., 2021

Information leakage resistant quantum dialogue with single photons in both polarization and spatial-mode degrees of freedom.
Quantum Inf. Process., 2021

Robust active suppression for body-freedom flutter of a flying-wing unmanned aerial vehicle.
J. Frankl. Inst., 2021

Supply Chain Financing Risk Measurement of Small and Micro Enterprises Based on Logistic-Copula Model.
Proceedings of the EBEE 2021: 3rd International Conference on E-Business and E-commerce Engineering, Sanya, China, December 17, 2021

2020
A Novel Order Analysis and Stacked Sparse Auto-Encoder Feature Learning Method for Milling Tool Wear Condition Monitoring.
Sensors, 2020

A Reliable Prognosis Approach for Degradation Evaluation of Rolling Bearing Using MCLSTM.
Sensors, 2020

Just Another Attention Network for Remaining Useful Life Prediction of Rolling Element Bearings.
IEEE Access, 2020

A Joint Optimization Algorithm Using Adaptive Minimum Coset Number Based Discrete Multi-Coset Sampling.
IEEE Access, 2020

2019
Rotating Stall Induced Non-Synchronous Blade Vibration Analysis for an Unshrouded Industrial Centrifugal Compressor.
Sensors, 2019

Remaining Life Prediction Method for Rolling Bearing Based on the Long Short-Term Memory Network.
Neural Process. Lett., 2019

Early Fault Diagnosis for Planetary Gearbox Based on Adaptive Parameter Optimized VMD and Singular Kurtosis Difference Spectrum.
IEEE Access, 2019

Convolutional Neural Network Based on Spiral Arrangement of Features and Its Application in Bearing Fault Diagnosis.
IEEE Access, 2019

A Fault Diagnosis Model Based on Kernel Auto-encoder and Improved Chaos Firefly Optimization Algorithm.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
500-2000-MHz Brightness Temperature Spectra of the Northwestern Greenland Ice Sheet.
IEEE Trans. Geosci. Remote. Sens., 2018

The Ultrawideband Software-Defined Microwave Radiometer: Instrument Description and Initial Campaign Results.
IEEE Trans. Geosci. Remote. Sens., 2018

Weak Defect Identification for Centrifugal Compressor Blade Crack Based on Pressure Sensors and Genetic Algorithm.
Sensors, 2018

Rolling element bearing weak fault diagnosis based on optimal wavelet scale cyclic frequency extraction.
J. Syst. Control. Eng., 2018

Measurements of 0.5-2 GHz Thermal Emission Spectra from the Greenland Ice Sheet, Sea Ice, and Permafrost: Results from September 2017 Campaign.
Proceedings of the 2018 IEEE International Geoscience and Remote Sensing Symposium, 2018

An Analysis of Bistatic Sea Clutter Statistics.
Proceedings of the 2018 IEEE International Geoscience and Remote Sensing Symposium, 2018

A deep neural network based on kernel function and auto-encoder for bearing fault diagnosis.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
On the Amplitude Distributions of Bistatic Scattered Fields From Rough Surfaces.
IEEE Trans. Geosci. Remote. Sens., 2017

The Ultra-Wideband Software Defined Microwave Radiometer (UWBRAD) for Ice sheet subsurface temperature sensing: Calibration and campaign results.
Proceedings of the 2017 IEEE International Geoscience and Remote Sensing Symposium, 2017

The ultra-wideband software defined microwave radiometer (UWBRAD) for ice sheet subsurface temperature sensing: RFI algorithms and performance.
Proceedings of the 2017 IEEE International Geoscience and Remote Sensing Symposium, 2017

Reliability assessment of rolling bearing based on principal component analysis and Weibull proportional hazard model.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
Enabling Semantics in an M2M/IoT Service Delivery Platform.
Proceedings of the Tenth IEEE International Conference on Semantic Computing, 2016

Incipient feature extraction for rolling element bearing based on particle filter preprocessing and kurtogram.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
A Systematic Study of Maximal Scheduling Algorithms in Multiradio Multichannel Wireless Networks.
IEEE/ACM Trans. Netw., 2015

Cutting tool operational reliability prediction based on acoustic emission and logistic regression model.
J. Intell. Manuf., 2015

Investigation on early fault classification for rolling element bearing based on the optimal frequency band determination.
J. Intell. Manuf., 2015

Early fault feature determination for rolling element bearing based by using improved reassigned wavelet scalogram.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
CA-P2P: context-aware proximity-based peer-to-peer wireless communications.
IEEE Commun. Mag., 2014

A systematic study of the delayed column generation method for optimizing wireless networks.
Proceedings of the Fifteenth ACM International Symposium on Mobile Ad Hoc Networking and Computing, 2014

2013
Routing Metrics for Minimizing End-to-End Delay in Multiradio Multichannel Wireless Networks.
IEEE Trans. Parallel Distributed Syst., 2013

Experimental Investigation on Centrifugal Compressor Blade Crack Classification Using the Squared Envelope Spectrum.
Sensors, 2013

2012
A theoretical framework for optimal cooperative networking in multiradio multichannel wireless networks.
IEEE Wirel. Commun., 2012

Wireless Mesh Network Capacity Achievable Over the CSMA/CA MAC.
IEEE Trans. Veh. Technol., 2012

A generic framework for throughput-optimal control in MR-MC wireless networks.
Proceedings of the IEEE INFOCOM 2012, Orlando, FL, USA, March 25-30, 2012, 2012

Sea surface infrared emissivity with surface reflection.
Proceedings of the 2012 IEEE International Geoscience and Remote Sensing Symposium, 2012

2011
Analysis of General Network Coding Conditions and Design of a Free-Ride-Oriented Routing Metric.
IEEE Trans. Veh. Technol., 2011

Local sufficient rate constraints for guaranteed capacity region in multi-radio multi-channel wireless networks.
Proceedings of the INFOCOM 2011. 30th IEEE International Conference on Computer Communications, 2011

Computing the Optimal Capacity of Multi-Radio Multi-Channel Wireless Network over Partially Overlapping Channels.
Proceedings of the Global Communications Conference, 2011

2010
Delay Analysis for Different Resource Allocation Schemes in Wireless Networks.
Proceedings of the Sixth International Conference on Mobile Ad-hoc and Sensor Networks, 2010

Capacity Region of a Wireless Mesh Backhaul Network over the CSMA/CA MAC.
Proceedings of the INFOCOM 2010. 29th IEEE International Conference on Computer Communications, 2010

Multi-dimensional Conflict Graph Based Computing for Optimal Capacity in MR-MC Wireless Networks.
Proceedings of the 2010 International Conference on Distributed Computing Systems, 2010

General Network Coding Conditions in Multi-Hop Wireless Networks.
Proceedings of IEEE International Conference on Communications, 2010

Optimal Capacity Planning in Multi-Radio Multi-Channel Wireless Networks.
Proceedings of IEEE International Conference on Communications, 2010

A Hybrid Relative Distance Based Cluster Scheme for Energy Efficiency in Wireless Sensor Networks.
Proceedings of the Global Communications Conference, 2010

2009
Minimizing End-to-End Delay: A Novel Routing Metric for Multi-Radio Wireless Mesh Networks.
Proceedings of the INFOCOM 2009. 28th IEEE International Conference on Computer Communications, 2009

2008
Multi-Hop Effective Bandwidth Based Routing in Multi-Radio Wireless Mesh Networks.
Proceedings of the Global Communications Conference, 2008. GLOBECOM 2008, New Orleans, LA, USA, 30 November, 2008

2007
Pattern Recognition of Reciprocating Engine by Using Hilbert Spectrum and K-S Test.
Proceedings of the Advanced Intelligent Computing Theories and Applications. With Aspects of Contemporary Intelligent Computing Techniques, 2007

2006
Investigation on Reciprocating Engine Pattern Recognition by Combining SVM and Hilbert Spectrum Entropy.
Proceedings of the Sixth International Conference on Intelligent Systems Design and Applications (ISDA 2006), 2006

Investigation on Reciprocating Engine Condition Classification by Using Wavelet Packet Hilbert Spectrum.
Proceedings of the Advances in Natural Computation, Second International Conference, 2006


  Loading...