Hsi-Yung Feng

Shuming Gao

Comput. Aided Des., April, 2023

2022

A robust direct modeling method for quadric B-rep models based on geometry-topology inconsistency tracking.

[BibT_eX]

[DOI]

Eng. Comput., 2022

A review on geometric constraint solving.

[BibT_eX]

[DOI]

CoRR, 2022

2020

Fast update of sliced voxel workpiece models using partitioned swept volumes of three-axis linear tool paths.

[BibT_eX]

[DOI]

Jimin Joy

Eng. Comput., 2020

Length-optimal tool path planning for freeform surfaces with preferred feed directions.

[BibT_eX]

[DOI]

Charlie C. L. Wang

CoRR, 2020

A decision-support method for information inconsistency resolution in direct modeling of CAD models.

[BibT_eX]

[DOI]

Adv. Eng. Informatics, 2020

2019

Variational B-rep model analysis for direct modeling using geometric perturbation.

[BibT_eX]

[DOI]

J. Comput. Des. Eng., 2019

Push-pull direct CAD modeling with movable neighboring faces for preserving G^1 connections.

[BibT_eX]

[DOI]

CoRR, 2019

On Limitations of the Witness Configuration Method for Geometric Constraint Solving in CAD Modeling.

[BibT_eX]

[DOI]

CoRR, 2019

Push-pull direct modeling of solid CAD models.

[BibT_eX]

[DOI]

Adv. Eng. Softw., 2019

2017

Extracting sectional contours from scanned point clouds via adaptive surface projection.

[BibT_eX]

[DOI]

Farbod Khameneifar

Int. J. Prod. Res., 2017

Establishing a balanced neighborhood of discrete points for local quadric surface fitting.

[BibT_eX]

[DOI]

Farbod Khameneifar

Comput. Aided Des., 2017

Frame-sliced voxel representation: An accurate and memory-efficient modeling method for workpiece geometry in machining simulation.

[BibT_eX]

[DOI]

Jimin Joy

Comput. Aided Des., 2017

2016

Cutter-workpiece engagement determination for general milling using triangle mesh modeling.

[BibT_eX]

[DOI]

Xun Gong

J. Comput. Des. Eng., 2016

2015

Outlier detection for scanned point clouds using majority voting.

[BibT_eX]

[DOI]

Yutao Wang

Comput. Aided Des., 2015

Preferred feed direction field: A new tool path generation method for efficient sculptured surface machining.

[BibT_eX]

[DOI]

Guillermo H. Kumazawa

M. Javad Barakchi Fard

Comput. Aided Des., 2015

2013

An adaptive normal estimation method for scanned point clouds with sharp features.

[BibT_eX]

[DOI]

Yutao Wang

Félix-Étienne Delorme

Serafettin Engin

Comput. Aided Des., 2013

An accurate and efficient algorithm for determining minimum circumscribed circles and spheres from discrete data points.

[BibT_eX]

[DOI]

Comput. Aided Des., 2013

2012

Process planning for Floor machining of 2½D pockets based on a morphed spiral tool path pattern.

[BibT_eX]

[DOI]

Avisekh Banerjee

Evgueni V. Bordatchev

Comput. Ind. Eng., 2012

2011

Web-DPP: towards job-shop machining process planning and monitoring.

[BibT_eX]

[DOI]

Ji Ma

Int. J. Manuf. Res., 2011

Reconstruction of 2D polygonal curves and 3D triangular surfaces via clustering of Delaunay circles/spheres.

[BibT_eX]

[DOI]

Daoshan OuYang

Comput. Aided Des., 2011

Reconfigurable Facility Layout Design for Job-Shop Assembly Operations.

[BibT_eX]

[DOI]

Shadi Keshavarzmanesh

Proceedings of the Multi-objective Evolutionary Optimisation for Product Design and Manufacturing., 2011

2010

ASP: An Adaptive Setup Planning Approach for Dynamic Machine Assignments.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2010

Design and simulation of an adaptive and collaborative assembly cell.

[BibT_eX]

[DOI]

Shadi Keshavarzmanesh

Int. J. Manuf. Res., 2010

A hybrid approach for dynamic assembly shop floor layout.

[BibT_eX]

[DOI]

Shadi Keshavarzmanesh

Proceedings of the IEEE Conference on Automation Science and Engineering, 2010

Delaunay-based triangular surface reconstruction from points via Umbrella Facet Matching.

[BibT_eX]

[DOI]

Ji Ma

Proceedings of the IEEE Conference on Automation Science and Engineering, 2010

2009

Function blocks enabled dynamic set-up dispatching and execution monitoring.

[BibT_eX]

[DOI]

Ningxu Cai

Int. J. Comput. Integr. Manuf., 2009

2008

Automatic Detection of Tangential Discontinuities in Point Cloud Data.

[BibT_eX]

[DOI]

Daoshan OuYang

J. Comput. Inf. Sci. Eng., 2008

A global clustering approach to point cloud simplification with a specified data reduction ratio.

[BibT_eX]

[DOI]

Comput. Aided Des., 2008

An adaptive and optimal setup planning system.

[BibT_eX]

[DOI]

Ji Ma

Proceedings of the 2008 IEEE International Conference on Automation Science and Engineering, 2008

2007

Point-cloud simplification with bounded geometric deviations.

[BibT_eX]

[DOI]

Int. J. Comput. Appl. Technol., 2007

2006

On the B-spline interpolated tool trajectories for five-axis sculptured surface machining.

[BibT_eX]

[DOI]

O. Remus Tutunea-Fatan

Int. J. Manuf. Res., 2006

Embedding machining features in function blocks for distributed process planning.

[BibT_eX]

[DOI]

W. Jin

Int. J. Comput. Integr. Manuf., 2006

A Point Cloud Simplification Algorithm for Mechanical Part Inspection.

[BibT_eX]

[DOI]

Proceedings of the Information Technology For Balanced Manufacturing Systems, 2006

Batch Roundness Characterization and Evaluation.

[BibT_eX]

[DOI]

Qimi Jiang

Proceedings of the Information Technology For Balanced Manufacturing Systems, 2006

2005

On the normal vector estimation for point cloud data from smooth surfaces.

[BibT_eX]

[DOI]

Daoshan OuYang

Comput. Aided Des., 2005

Iso-planar piecewise linear NC tool path generation from discrete measured data points.

[BibT_eX]

[DOI]

Zhengji Teng

Comput. Aided Des., 2005

2003

Minimum-Zone Form Tolerance Evaluation Using Rigid-Body Coordinate Transformation.

[BibT_eX]

[DOI]

Dawit H. Endrias

J. Comput. Inf. Sci. Eng., 2003

2002

Constant scallop-height tool path generation for three-axis sculptured surface machining.

[BibT_eX]

[DOI]