Karim Medles

According to our database1, Karim Medles authored at least 46 papers between 2007 and 2023.

Collaborative distances:
  • Dijkstra number2 of six.
  • Erdős number3 of six.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
Optimization of the Geometry of a Free-Fall Separator Equipped with Two Flexible Electrodes.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2023

Electrostatic Separation of Valuable Metals from Finely-Ground WEEE.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2023

Experimental Modelling and Optimization of the Tribo-Electrostatic Separation of PET Fibers from End-of-Life Tires.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2023

2021
Effect of Ambient Air Relative Humidity on the Surface Electric Potential Decay of Tribocharged Polypropylene and Polyvinyl Chloride Slabs.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021

New Spiral-type Tribocharger for Granular Plastics Mixtures with Application to Electrostatic Separation.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021

Triboelectrostatic Separation of Polymer Mixtures Containing Brominated Flame Retardants.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021

Tribo-electrostatic separation of two or more plastics contained in granular mixtures originating from WEEE.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021

2020
Study of the effect of the duration of the cold plasma treatment on the triboelectric properties of polymers.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2020

Experimental observation of charged particles trajectories in roll-type electrostatic separators.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2020

Experimental characterization of a tri-needle-type corona electrode.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2020

Factors influencing the triboelectric charging of granular plastics in a new multi-cylinder type device.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2020

2019
Experimental analysis of the operation of a free-fall separator equipped with four rotating cylinders.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Experimental modeling and optimization of the active neutralization of a PP film, using design of experiments methodology.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Validation of the numerical model of particle trajectories in a multifunctional electrostatic separator.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Experimental study of a new tribocharging device for the electrostatic separation of mixed granular insulating materials.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Insulating conveyor-belt-type electrostatic separator for triboelectrically-charged granular plastic wastes.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Effect of Dielectric Barrier Discharge Exposure on the Triboelectric Charging of Granular Plastics.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Triboelectrostatic separation of brominated flame retardants polymers from mixed granular wastes.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

Endurance Test of a Rotating-Cylinder-Type Tribocharger.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

2017
Factors that affect tribocharging of PE granules after exposure to a dielectric barrier discharge (DBD).
Proceedings of the 2017 IEEE Industry Applications Society Annual Meeting, 2017

Statistical process control of the tribocharging of polymer slabs in frictional sliding contact.
Proceedings of the 2017 IEEE Industry Applications Society Annual Meeting, 2017

Experimental investigation of a roll-type tribo-electrostatic separator for granular waste plastics.
Proceedings of the 2017 IEEE Industry Applications Society Annual Meeting, 2017

Premises for industrial application of a two-rotating-disks-type tribo-aero-electrostatic separator for micronized WEEE.
Proceedings of the 2017 IEEE Industry Applications Society Annual Meeting, 2017

2015
Experimental investigation of a new-electrostatic separation process for micronized plastics.
Proceedings of the 2015 IEEE Industry Applications Society Annual Meeting, 2015

Recovery of water bottles plastic using tribo-electrostatic separation process.
Proceedings of the 2015 IEEE Industry Applications Society Annual Meeting, 2015

New aero-dynamic tribo-charging device with application to the electrostatic separation of granular mixtures of insulating materials.
Proceedings of the 2015 IEEE Industry Applications Society Annual Meeting, 2015

2014
Improving the Surface Electric Potential Measurement Capability for Textile Materials.
Qual. Reliab. Eng. Int., 2014

Numerical simulation of the trajectories of insulating particles in a tribo-aero-electrostatic separator.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

Multivariate control for three variables of an industrial roll-type electrostatic separator.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

Performance improvement of a separator tribo-electrostatic aero for granular materials plastics recycling of waste electrical and electronic equipment.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

Study of a tribo-aero-electrostatic separator for mixtures of micronized insulating materials.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

Experimental modelling of a new tribo-electrostatic separation process for micronized plastics.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

Modeling and optimization of a separator for granular mixtures composed of multiple insulating materials.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

2013
Experimental analysis of a vibrating tribocharging device of plastic particles for free-fall triboelectric separator.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

Tribo-aero-electrostatic separator for ternary mixtures of granular plastics.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

Improvement of the industrial pilot of a tribo-aero- electrostatic separator for binary mixtures of granular insulating materials.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

Experimental and numerical characterization of corona discharge generated by a triode electrode system.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

Effect of ambient humidity on the outcome of electrostatic separation process for mixed granular polymers.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

2012
Optimisation of one stage electrostatic precipitator for welding fume filtration.
Sci. Iran., 2012

Experimental investigation of the dielectric barrier discharge using design of experiments.
Sci. Iran., 2012

2011
Experimental study of the effect of ambient air humidity on the efficiency of tribo-aero-electrostatic separation of mixed granular solids.
Proceedings of the 2011 IEEE Industry Applications Society Annual Meeting, 2011

2010
Application of Genetic Algorithms to the Optimization of a Roll-Type Electrostatic Separation Process.
Proceedings of the Annual Meeting of the IEEE Industry Applications Society, 2010

2008
Set-Point Identification and Robustness Testing of a Free-Fall Triboelectrostatic Separation Process.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Comparative Study between the Shewhart and CUSUM Charts for the Statistic Control of Electrostatic Separation Processes.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Experimental Study of Corona Discharge Generated in a Modified Wire-Plate Electrode Configuration for Electrostatic Processes Applications.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Multivariate Statistical Process Control of Electrostatic Separation Processes.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007


  Loading...