Manuel Barranco

Proceedings of the 28th IEEE International Conference on Emerging Technologies and Factory Automation, 2023

2022

An Infrastructure for Enabling Dynamic Fault Tolerance in Highly-Reliable Adaptive Distributed Embedded Systems Based on Switched Ethernet.

[BibT_eX]

[DOI]

Pere Palmer-Rodríguez

Sensors, 2022

Migrating Legacy Ethernet-Based Traffic with Spatial Redundancy to TSN networks.

[BibT_eX]

[DOI]

Proceedings of the 27th IEEE International Conference on Emerging Technologies and Factory Automation, 2022

2021

Design and Experimental Evaluation of the Proactive Transmission of Replicated Frames Mechanism over Time-Sensitive Networking.

[BibT_eX]

[DOI]

Sensors, 2021

Reliability Analysis of the Proactive Transmission of Replicated Frames Mechanism over Time-Sensitive Networking.

[BibT_eX]

[DOI]

Inés Álvarez

Sensors, 2021

2019

A Fault-Tolerant Ethernet for Hard Real-Time Adaptive Systems.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Informatics, 2019

Fault Tolerance in Highly Reliable Ethernet-Based Industrial Systems.

[BibT_eX]

[DOI]

Proc. IEEE, 2019

Formal Verification of the FTTRS Mechanisms for the Consistent Update of the Traffic Schedule.

[BibT_eX]

[DOI]

Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019

Temporal Replication of Messages for Adaptive Systems using a Holistic Approach.

[BibT_eX]

[DOI]

Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019

Simulation of the Proactive Transmission of Replicated Frames Mechanism over TSN.

[BibT_eX]

[DOI]

Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019

2018

Towards a Fault-Tolerant Architecture Based on Time Sensitive Networking.

[BibT_eX]

[DOI]

Ines Alvarez

Proceedings of the 23rd IEEE International Conference on Emerging Technologies and Factory Automation, 2018

Reconfiguration Strategies for Critical Adaptive Distributed Embedded Systems.

[BibT_eX]

[DOI]

Proceedings of the 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops, 2018

Mixing Time and Spatial Redundancy Over Time Sensitive Networking.

[BibT_eX]

[DOI]

Ines Alvarez

Proceedings of the 48th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops, 2018

2017

Towards a time redundancy mechanism for critical frames in time-sensitive networking.

[BibT_eX]

[DOI]

Proceedings of the 22nd IEEE International Conference on Emerging Technologies and Factory Automation, 2017

2016

Designing fault-diagnosis and reintegration to prevent node redundancy attrition in highly reliable control systems based on FTT-Ethernet.

[BibT_eX]

[DOI]

Proceedings of the IEEE World Conference on Factory Communication Systems, 2016

First implementation and test of a node replication scheme on top of the flexible time-triggered replicated star for ethernet.

[BibT_eX]

[DOI]

Proceedings of the IEEE World Conference on Factory Communication Systems, 2016

Improving maintenance of FT4FTT: Extending it to monitor and log its available redundancy via internet.

[BibT_eX]

[DOI]

Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

First implementation and test of reintegration mechanisms for node replicas in the FT4FTT Architecture.

[BibT_eX]

[DOI]

Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

2015

Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses.

[BibT_eX]

[DOI]

Reliab. Eng. Syst. Saf., 2015

First experimental evaluation of the consistent replicated voting in the hard real-time ethernet switching architecture.

[BibT_eX]

[DOI]

Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

An OMNET++ model to asses node fault-tolerance mechanisms for FTT-Ethernet DESs.

[BibT_eX]

[DOI]

Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

2014

sfiCAN: A Star-Based Physical Fault-Injection Infrastructure for CAN Networks.

[BibT_eX]

[DOI]

IEEE Trans. Veh. Technol., 2014

A proposal for managing the redundancy provided by the flexible time-triggered replicated star for ethernet.

[BibT_eX]

[DOI]

Proceedings of the 10th IEEE Workshop on Factory Communication Systems, 2014

A proposal for master replica control in the flexible time-triggered replicated star for ethernet.

[BibT_eX]

[DOI]

Proceedings of the 10th IEEE Workshop on Factory Communication Systems, 2014

Towards a reliability analysis of the design space for the communication subsystem of FT4FTT.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

Towards an experimental assessment of the slave elementary cycle synchronization in the Flexible Time-Triggered Replicated Star for Ethernet.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

Using FTT-ethernet for the coordinated dispatching of tasks and messages for node replication.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

Appropriate consistent replicated voting for increased reliability in a node replication scheme over FTT.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

A model for quantifying the reliability of highly-reliable distributed systems based on fieldbus replicated buses.

[BibT_eX]

[DOI]

Francisco Pozo

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

2013

Design and Verification of a Media Redundancy Management Driver for a CAN Star Topology.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Informatics, 2013

Towards a Flexible Time-Triggered replicated star for ethernet.

[BibT_eX]

[DOI]

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

Towards preventing error propagation in a real-time Ethernet switch.

[BibT_eX]

[DOI]

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

2012

The design of the CANbids architecture.

[BibT_eX]

[DOI]

Fernando Guardiola

Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

Using FTT and stars to simplify node replication in CAN-based systems.

[BibT_eX]

[DOI]

Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

A first qualitative evaluation of star replication schemes for FTT-CAN.

[BibT_eX]

[DOI]

Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

Developing TOBE-CAN: Total order broadcast enforcement in CAN.

[BibT_eX]

[DOI]

Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

2011

Quantitative Comparison of the Error-Containment Capabilities of a Bus and a Star Topology in CAN Networks.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2011

Designing sfiCAN: A star-based physical fault injector for CAN.

[BibT_eX]

[DOI]

Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

Towards the integration of flexible-time-triggered communication and replicated star topologies in CAN.

[BibT_eX]

[DOI]

Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

Towards understanding the sensitivity of the reliability achievable by simplex and replicated star topologies in CAN.

[BibT_eX]

[DOI]

Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

2010

First prototype and experimental assessment of media management in ReCANcentrate.

[BibT_eX]

[DOI]

Proceedings of 15th IEEE International Conference on Emerging Technologies and Factory Automation, 2010

2009

Boosting the Robustness of Controller Area Networks: CANcentrate and ReCANcentrate.

[BibT_eX]

[DOI]

Computer, 2009

First Quantitative Results of the Dependability Improvement Achieved by ReCANcentrate.

[BibT_eX]

[DOI]

Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2009

Demonstrating the Feasibility of Media Management in ReCANcentrate.

[BibT_eX]

[DOI]

Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2009

2008

Designing and verifying media management in ReCANcentrate.

[BibT_eX]

[DOI]

Proceedings of 13th IEEE International Conference on Emerging Technologies and Factory Automation, 2008

2006

An active star topology for improving fault confinement in CAN networks.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Informatics, 2006

2003

COTS-based hardware support to timeliness in CAN networks.

[BibT_eX]

[DOI]