Marco Parvis

Orcid: 0000-0002-9723-6188

According to our database1, Marco Parvis authored at least 89 papers between 1996 and 2023.

Collaborative distances:

Awards

IEEE Fellow

IEEE Fellow 2008, "For contributions to distributed data acquisition systems".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Paving the Way for Motor Imagery-Based Tele-Rehabilitation through a Fully Wearable BCI System.
Sensors, July, 2023

Changes Over Time in the Electrode/Brain Interface Impedance: An Ex-Vivo Study.
IEEE Trans. Biomed. Circuits Syst., June, 2023

Sinc-EEGNet for Improving Performance While Reducing Calibration of a Motor Imagery-Based BCI.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Impedance measurements for demineralized tooth lesions assessment.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

Electrochemical Characterization of Flexible Interdigitated Electrodes for Hydration Monitoring.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

Development of a low-cost and portable device for Reflectance Transformation Imaging.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Online processing for motor imagery-based brain-computer interfaces relying on EEG.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
Rotating-Coil Measurement System for Small-Bore-Diameter Magnet Characterization.
Sensors, 2022

Drift-Free Integration in Inductive Magnetic Field Measurements Achieved by Kalman Filtering.
Sensors, 2022

Guest Editorial.
IEEE Instrum. Meas. Mag., 2022

Multimodal Feedback in Assisting a Wearable Brain-Computer Interface Based on Motor Imagery.
Proceedings of the IEEE International Conference on Metrology for Extended Reality, 2022

Nanoindentation and Raman spectroscopy measurements on dual-cure luting cement for dental conservative restoration.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

Preliminary impedance spectroscopy study for carious lesions detection.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

Sodium lactate solutions characterization using Electrochemical Impedance Spectroscopy.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

Comparing Artifact Removal Techniques for Daily-Life Electroencephalography with Few Channels.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

Metrological validation of a photogrammetry-based technique.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Impedance spectroscopy for monitoring sound teeth and carious lesions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Non-immersive Versus Immersive Extended Reality for Motor Imagery Neurofeedback Within a Brain-Computer Interfaces.
Proceedings of the Extended Reality - First International Conference, 2022

2021
Electrochemical Impedance Spectroscopy System Based on a Teensy Board.
IEEE Trans. Instrum. Meas., 2021

Channel Selection for Optimal EEG Measurement in Motor Imagery-Based Brain-Computer Interfaces.
Int. J. Neural Syst., 2021

Hydrogen chemoresistive sensor for the analysis of gut health.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2021

A low-cost automatic acquisition system for photogrammetry.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Brain-computer Interfaces for Daily-life Applications: a Five-year Experience Report.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020
High Sensitive and Selective Minisensor for Acetone Monitoring.
IEEE Trans. Instrum. Meas., 2020

Guest editorial.
IEEE Instrum. Meas. Mag., 2020

Ethanol breath measuring system.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Electrochemical behaviour of additively manufactured titanium for biomedical applications.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Body temperature measurement from the 17<sup>th</sup> century to the present days.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

A trustable 3D photogrammetry approach for cultural heritage.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

An op amp-less Electrochemical Impedance Spectroscopy System.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Employment of Nb2O5 thin-films for ethanol sensing.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Instrumentation for Motor Imagery-based Brain Computer Interfaces relying on dry electrodes: a functional analysis.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
An Optical Sampling System for Distributed Atmospheric Particulate Matter.
IEEE Trans. Instrum. Meas., 2019

A Novel Approach for Microbial Corrosion Assessment.
IEEE Trans. Instrum. Meas., 2019

Nb2O5 thin film-based conductometric sensor for acetone monitoring.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

An imaging approach to assess the antimicrobial behavior of Ag-doped organic coatings.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

A Wearable System for Noise Assessment in Workplaces.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

An imaging system for microbial corrosion analysis.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Metrological performance of a single-channel Brain-Computer Interface based on Motor Imagery.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

A Wearable SSVEP-based brain-Computer Interface with off-the-Shelf Components.
Proceedings of the 8th Graz Brain-Computer Interface Conference 2019, 2019

2018
Wireless Sensor Network for Distributed Environmental Monitoring.
IEEE Trans. Instrum. Meas., 2018

iHomeX: An Internet-Enabled Laboratory for Long-Term Experiment Management.
IEEE Trans. Instrum. Meas., 2018

An Optical Sensing System for Atmospheric Particulate Matter.
Proceedings of the Sensors, 2018

A Sensor Network for Particulate Distribution Estimation.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Electrochemical measurements to predict the antifungal properties of nanostructured thin films.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Optical solution for particulate distribution estimation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

A microbial fuel cell measuring system for corrosion assessment.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Inertial measurement system for swimming rehabilitation.
Proceedings of the 2017 IEEE International Symposium on Medical Measurements and Applications, 2017

Sensor network for museum environmental monitoring.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2017

Cloud infrastructure for museum environmental monitoring.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

A remotely accessible laboratory for corrosion training.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
Swimming symmetry assessment via multiple inertial measurements.
Proceedings of the 2016 IEEE International Symposium on Medical Measurements and Applications, 2016

Wireless sensor network architecture for remote non-invasive museum monitoring.
Proceedings of the IEEE International Symposium on Systems Engineering, 2016

Indirect material density measurement by a simple digital imaging method.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

Laser cleaning of metal artifacts: Microstructural, chemical and optical fiber-based analysis.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
Low-Cost Impedance Spectroscopy System Based on a Logarithmic Amplifier.
IEEE Trans. Instrum. Meas., 2015

Design and Deployment of Low-Cost Plastic Optical Fiber Sensors for Gas Monitoring.
Sensors, 2015

Development and characterization of porous magnesium bioresorbable implants.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

Wavelet image decomposition for characterization of freeze-dried pharmaceutical product structures.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Technical committee on biological and medical measurements [TC-25update].
IEEE Instrum. Meas. Mag., 2014

Characterization of freeze-dried pharmaceutical product structures by an FFT-imaging approach.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Real-time temperature monitoring in pharmaceutical freeze-drying.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Electrochemical characterization of magnesium bioabsorbable implants.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Sputtered thermocouple array for vial temperature mapping.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

An application of the Random-Fuzzy variables for the safeguard of underwater cultural heritage.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

An Arduino-based EIS with a logarithmic amplifier for corrosion monitoring.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Inert Thermocouple With Nanometric Thickness for Lyophilization Monitoring.
IEEE Trans. Instrum. Meas., 2013

Biodegradable metallic materials: A measuring approach to predict the corrosion rate.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Integrated measuring approach for the study of corrosion mechanisms.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
Modified POF Sensor for Gaseous Hydrogen Fluoride Monitoring in the Presence of Ionizing Radiations.
IEEE Trans. Instrum. Meas., 2012

Noninvasive Solution for Electrochemical Impedance Spectroscopy on Metallic Works of Art.
IEEE Trans. Instrum. Meas., 2012

2011
Exposure-Tolerant Imaging Solution for Cultural Heritage Monitoring.
IEEE Trans. Instrum. Meas., 2011

2010
In-Process Temperature Mapping System for Industrial Freeze Dryers.
IEEE Trans. Instrum. Meas., 2010

2009
Measurement Procedures for the Electrical Characterization of Oxide Thin Films.
IEEE Trans. Instrum. Meas., 2009

A Wireless Sensor Network for Cold-Chain Monitoring.
IEEE Trans. Instrum. Meas., 2009

2006
Low-Cost Laser-Based Localization System for Agricultural Machines.
IEEE Trans. Instrum. Meas., 2006

Handheld-impedance-measurement system with seven-decade capability and potentiostatic function.
IEEE Trans. Instrum. Meas., 2006

2004
A traveling standard for the calibration of data acquisition boards.
IEEE Trans. Instrum. Meas., 2004

2003
A precompliance EMC test-set based on a sampling oscilloscope.
IEEE Trans. Instrum. Meas., 2003

Automatic compensation system for impedance measurement.
IEEE Trans. Instrum. Meas., 2003

An audio card-based kit for educational purposes.
IEEE Trans. Instrum. Meas., 2003

Virtual environment for fast development of distributed measurement applications.
IEEE Trans. Instrum. Meas., 2003

2001
Uncertainty analysis of feature extraction from expired gas traces.
IEEE Trans. Instrum. Meas., 2001

Mixed neural-conventional processing to differentiate airway diseases by means of functional noninvasive tests.
IEEE Trans. Instrum. Meas., 2001

2000
Low-cost electrochemical impedance spectroscopy system for corrosion monitoring of metallic antiquities and works of art.
IEEE Trans. Instrum. Meas., 2000

A Web-based distributed virtual educational laboratory.
IEEE Trans. Instrum. Meas., 2000

1999
A measurement system for on-line estimation of weed coverage.
IEEE Trans. Instrum. Meas., 1999

1998
A client-server architecture for distributed measurement systems.
IEEE Trans. Instrum. Meas., 1998

1996
Multimedia Training and Remote Operating Laboratory: Innovative Solutions for Instrumentation and Electronic Measurements Courses.
Proceedings of the Computer Aided Learning and Instruction in Science and Engineering, 1996


  Loading...