Matteo Felice Iacchetti

According to our database, Matteo Felice Iacchetti authored at least 18 papers between 2011 and 2021.

Collaborative distances:

• Dijkstra number of six.
• Erdős number of five.

2021

Current-Modulation-Based On-Line Resonance Tuning Strategy for Linear Generator Drives.

Min Zhang, Alexey Bodrov, Roger Shuttleworth, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2021

On the Stability of a Minimum-Loss Controlled Dual-VSI DFIG-DC System.

Gil D. Marques, Matteo Felice Iacchetti, Sérgio M. A. Cruz

Proceedings of the IECON 2021, 2021

2020

Minimum-Loss Control Strategy for a Dual-VSI DFIG DC System.

Gil D. Marques, Sérgio M. A. Cruz, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2020

2019

Minimum Loss Conditions in a Salient-Pole Wound-Field Synchronous Machine Drive.

Gil D. Marques, Matteo Felice Iacchetti

Proceedings of the IECON 2019, 2019

2018

Impact of Line and Control Parameters on Droop Stability in Inverters for Distributed Generation.

Alberto Bolzoni, Giovanni Maria Foglia, Luisa Frosio, Matteo Felice Iacchetti, Roberto Perini

IEEE Trans. Smart Grid, 2018

Minimization of Torque Ripple in the DFIG-DC System Via Predictive Delay Compensation.

Gil D. Marques, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2018

Predictive Torque and Rotor Flux Control of a DFIG-DC System for Torque Ripple Compensation and Loss Minimization.

Sérgio M. A. Cruz, Gil D. Marques, P. F. C. Goncalves, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2018

2017

Sensorless Frequency and Voltage Control in the Stand-Alone DFIG-DC System.

Gil D. Marques, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2017

2016

Field-Weakening Control for Efficiency Optimization in a DFIG Connected to a DC-Link.

G. D. Marques, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2016

Parasitic Currents in Stray Paths of Some Topologies of YASA AFPM Machines: Trend With Machine Size.

Antonino Di Gerlando, Giovanni Maria Foglia, Matteo Felice Iacchetti, Roberto Perini

IEEE Trans. Ind. Electron., 2016

2015

A Self-Sensing Stator-Current-Based Control System of a DFIG Connected to a DC-Link.

G. D. Marques, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2015

2014

Stator Frequency Regulation in a Field-Oriented Controlled DFIG Connected to a DC Link.

Gil D. Marques, Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2014

Stator Inductance Self-Tuning in an Air-Gap-Power-Vector-Based Observer for the Sensorless Control of Doubly Fed Induction Machines.

Matteo Felice Iacchetti, Gil D. Marques, Roberto Perini, Duarte M. Sousa

IEEE Trans. Ind. Electron., 2014

Effects of Manufacturing Imperfections in Concentrated Coil Axial Flux PM Machines: Evaluation and Tests.

Antonino Di Gerlando, Giovanni Maria Foglia, Matteo Felice Iacchetti, Roberto Perini

IEEE Trans. Ind. Electron., 2014

2013

An Observer for Sensorless DFIM Drives Based on the Natural Fifth Harmonic of the Line Voltage, Without Stator Current Measurement.

Francesco Castelli-Dezza, Matteo Felice Iacchetti, Roberto Perini

IEEE Trans. Ind. Electron., 2013

2012

Analysis and Test of Diode Rectifier Solutions in Grid-Connected Wind Energy Conversion Systems Employing Modular Permanent-Magnet Synchronous Generators.

Antonino Di Gerlando, Gian Maria Foglia, Matteo Felice Iacchetti, Roberto Perini

IEEE Trans. Ind. Electron., 2012

2011

Adaptive Tuning of the Stator Inductance in a Rotor-Current-Based MRAS Observer for Sensorless Doubly Fed Induction-Machine Drives.

Matteo Felice Iacchetti

IEEE Trans. Ind. Electron., 2011

Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators.

Antonino Di Gerlando, Gian Maria Foglia, Matteo Felice Iacchetti, Roberto Perini

IEEE Trans. Ind. Electron., 2011