Ming Yang

Orcid: 0000-0003-0462-6046

Affiliations:
  • Harbin Institute of Technology, State Key Laboratory of Robotics and System, China
  • Harbin Institute of Technology, Department of Electrical Engineering, China (PhD 2007)


According to our database1, Ming Yang authored at least 28 papers between 2006 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
High Bandwidth Current Regulator Design for PMSM Based on Frequency Sweep Correction.
IEEE Trans. Ind. Electron., February, 2024

2023
A Transistor-Based Assist Gate Driver of SiC MOSFET for Crosstalk Suppression in a Phase-Leg Configuration.
IEEE Access, 2023

2022
An Accurate VSI Nonlinearity Modeling and Compensation Method Accounting for DC-Link Voltage Variation Based on LUT.
IEEE Trans. Ind. Electron., 2022

Reversed Structure Based PI-Lead Controller Antiwindup Design and Self-Commissioning Strategy for Servo Drive Systems.
IEEE Trans. Ind. Electron., 2022

A Dual-Loop Position Servo System Based on Position and Speed Parallel Control Structure.
IEEE Access, 2022

2021
Trajectory Tracking and Vibration Control of Flexible Beams in Multi-Axis System.
IEEE Access, 2021

Current-Controller-Free Self-Commissioning Scheme for Deadbeat Predictive Control in Parametric Uncertain SPMSM.
IEEE Access, 2021

2020
Motor Speed Signature Analysis for Local Bearing Fault Detection With Noise Cancellation Based on Improved Drive Algorithm.
IEEE Trans. Ind. Electron., 2020

Vibration Suppression and Over-Quadrant Error Mitigation Methods for a Ball-Screw Driven Servo System With Dual-Position Feedback.
IEEE Access, 2020

2019
Analysis of Oscillation Frequency Deviation in Elastic Coupling Digital Drive System and Robust Notch Filter Strategy.
IEEE Trans. Ind. Electron., 2019

A Modified Full-Band Adjustable Bi-Quad Filter for Mechanical Resonance Suppression in Industrial Servo Drive Systems.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019

2018
A Novel Integrated Identification Method of Model Structure and Parameters for Drive System.
Proceedings of the 27th IEEE International Symposium on Industrial Electronics, 2018

2017
Analysis and Suppression of Limit Cycle Oscillation for Transmission System With Backlash Nonlinearity.
IEEE Trans. Ind. Electron., 2017

Current sensorless deadbeat predictive control method for permanent magnet synchronous motor.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

A novel algorithm for on-line inertia identification via adaptive recursive least squares.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

M/T method based incremental encoder velocity measurement error analysis and self-adaptive error elimination algorithm.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Suppression of mechanical resonance in digital servo system considering oscillation frequency deviation.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Gear fault diagnosis based on resonance-based sparse signal decomposition of motor current.
Proceedings of the 2017 IEEE Industry Applications Society Annual Meeting, 2017

2016
Analysis of limit cycle mechanism for two-mass system with backlash nonlinearity.
Proceedings of the IECON 2016, 2016

Advanced online parameter identification-based PWM predictive control for AC servo systems.
Proceedings of the IECON 2016, 2016

A non-cascade predictive speed and current controller with PWM modulation for PMSM.
Proceedings of the IECON 2016, 2016

A sensorless rotor position detection method based on field current pulsation for high power synchronous motors.
Proceedings of the IECON 2016, 2016

2015
Comments on "Antiwindup Strategy for PI-Type Speed Controller".
IEEE Trans. Ind. Electron., 2015

Vibration Suppression With Shaft Torque Limitation Using Explicit MPC-PI Switching Control in Elastic Drive Systems.
IEEE Trans. Ind. Electron., 2015

2014
Mechanical resonance suppression and shaft torque limitation of two-mass drive system based on model predictive control.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Improved predictive current control with static current error elimination for permanent magnet synchronous machine.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2012
Study of on-line backlash identification for PMSM servo system.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2006
Low Speed Control of PMAC Servo System Based on Reduced-order Observer.
Proceedings of the 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2006


  Loading...