Pascal Maussion

Orcid: 0000-0002-5068-4055

According to our database1, Pascal Maussion authored at least 41 papers between 2002 and 2022.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2022
Frugal Innovation for Rural Electrification, Re-used Components for Battery Charging.
Proceedings of the 31st IEEE International Symposium on Industrial Electronics, 2022

Modelling of PDIV evolution over time under multiple ageing factors for insulation of inverter-fed electrical machines.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2022

2021
Modeling OLED luminance decay under thermal, constant and cyclic electrical stress.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021

2020
Association of Recycled PC PSU with MPPT and a Control Application in a Smartphone.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

2019
Power alternator simulation models for diagnostic purposes.
Math. Comput. Simul., 2019

Novel Configuration of a Three-phase Induction Generator for Single-phase Load: Simulations and Experimentations.
Proceedings of the IECON 2019, 2019

Degradation of the luminance and impedance evolution analysis of an OLED under thermal and electrical stress.
Proceedings of the IECON 2019, 2019

Mechanical faults detection in induction machine using recursive PCA with weighted distance.
Proceedings of the IEEE International Conference on Industrial Technology, 2019

2018
Associations of Second Life Power Supply Units as Charge Controllers in PV System.
Proceedings of the IECON 2018, 2018

Bearing fault diagnosis based on the analysis of recursive PCA projections.
Proceedings of the IEEE International Conference on Industrial Technology, 2018

Use of Design of Experiments (DoE) predictive models as a method of comparison of enameled wires used in low voltage inverter-fed motors.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2018

Parametric lifespan models for OLEDs using Design of Experiments (DoE).
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2018

2017
Statistic-Based Method to Monitor Belt Transmission Looseness Through Motor Phase Currents.
IEEE Trans. Ind. Informatics, 2017

Regression methods for improved lifespan modeling of low voltage machine insulation.
Math. Comput. Simul., 2017

Measuring rotor speed with a smartphone camera.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Novel structure of single-phase generator from three-phase induction machine: Modeling and simulation.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Prediction of the lifespan of enameled wires used in low voltage inverter-fed motors by using the Design of Experiments (DoE).
Proceedings of the 2017 IEEE Industry Applications Society Annual Meeting, 2017

2016
Renewable electricity production with some wasted second-life components.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Second life of power supply unit as charge controller in PV system and environmental benefit assessment.
Proceedings of the IECON 2016, 2016

Transmission belt looseness detection through a variable speed drive.
Proceedings of the IECON 2016, 2016

Several configurations and resonant control for multiphase induction heating systems.
Proceedings of the 2016 IEEE Industry Applications Society Annual Meeting, 2016

Acoustic resonance detection using statistical methods of voltage envelope characterization in metal halide lamps.
Proceedings of the 2016 IEEE Industry Applications Society Annual Meeting, 2016

2015
Current-Based Detection of Mechanical Unbalance in an Induction Machine Using Spectral Kurtosis With Reference.
IEEE Trans. Ind. Electron., 2015

Improvements on experimental modeling of the losses in induction machine with Taguchi orthogonal plan.
Proceedings of the IECON 2015, 2015

2014
Induction Heating Technology and Its Applications: Past Developments, Current Technology, and Future Challenges.
IEEE Trans. Ind. Electron., 2014

Introduction to the Special Section on Induction Heating Systems.
IEEE Trans. Ind. Electron., 2014

A generic diagnosis protocol for the monitoring of induction motors based on multiple statistical references in the torque-speed plane.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Modeling iron, mechanical and rotor copper losses in induction machine with the design of experiments.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Parameter identification method for a 3-phase induction heating system.
Proceedings of the 2014 IEEE Industry Application Society Annual Meeting, 2014

2013
Electrical Aging of the Insulation of Low-Voltage Machines: Model Definition and Test With the Design of Experiments.
IEEE Trans. Ind. Electron., 2013

Energy optimization of control loops for concentrated solar plants with the design of experiments.
Proceedings of the IECON 2013, 2013

Robustness of a resonant controller for a multiphase induction heating system.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

2012
Bearing fault detection in synchronous machine based on the statistical analysis of stator current.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Experimental comparison between diagnostic indicators for bearing fault detection in synchronous machine by spectral Kurtosis and energy analysis.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Resonant control of multi-phase induction heating systems.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Optimization of the settings of multiphase induction heating system.
Proceedings of the Annual Meeting of the IEEE Industry Applications Society, 2012

2011
Acoustic resonance characterization and numerical model including acoustic streaming in an HPS lamp.
Proceedings of the 2011 IEEE Industry Applications Society Annual Meeting, 2011

Multi phase induction system for metal disc heating: modeling and RMS-current control.
Proceedings of the 2011 IEEE Industry Applications Society Annual Meeting, 2011

2008
Acoustic Resonance Characteristics in a High Pressure Sodium Lamp.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2003
Multiple model control of a Buck dc/dc converter.
Math. Comput. Simul., 2003

2002
Multicell converters: active control and observation of flying-capacitor voltages.
IEEE Trans. Ind. Electron., 2002


  Loading...