Roman Szewczyk

Orcid: 0000-0002-1214-1009

Affiliations:
  • Warsaw University of Technology, Institute of Metrology and Biomedical Engineering, Poland


According to our database1, Roman Szewczyk authored at least 66 papers between 2012 and 2022.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2022
Automatic characterization of MEMS electronic filters.
Proceedings of the IEEE 11th International Conference on Intelligent Systems, 2022

2021
LTspice Implementation of Gyrator-Capacitor Magnetic Circuit Model Considering Losses and Magnetic Saturation for Transient Simulations of Switching Mode Power Supplies Utilizing Inductive Elements with Cores Made of Amorphous Alloys.
Proceedings of the Automation 2021: Recent Achievements in Automation, 2021

Estimation of the Parameters of Anhysteretic Curve of Isotropic and Anisotropic Magnetic Materials on the Base of Initial Anhysteretic Permeability Measurements.
Proceedings of the Automation 2021: Recent Achievements in Automation, 2021

2020
Modelling the Characteristics of Ring-Shaped Magnetoelastic Force Sensor in Mohri's Configuration.
Sensors, 2020

Novel Giant Magnetoimpedance Magnetic Field Sensor.
Sensors, 2020

Stability of Jiles-Atherton Anhysteretic Magnetization Curve Model for Magnetic Materials with Uniaxial Anisotropy.
Proceedings of the Automation 2020: Towards Industry of the Future, 2020

Magnetic Permeability Tensor with Saturation Flux Density Description for 2D Materials with Uniaxial Anisotropy.
Proceedings of the Automation 2020: Towards Industry of the Future, 2020

2019
Determination of the Location and Magnetic Moment of Ferromagnetic Objects Based on the Analysis of Magnetovision Measurements.
Sensors, 2019

Heat Transfer Model of a Small Size Satellite on Geostationary Orbit.
J. Autom. Mob. Robotics Intell. Syst., 2019

Universal Data Acquisition Module PIAP-UDAM for INDUSTRY 4.0 Application in Agriculture.
Proceedings of the Automation 2019, 2019

Simplified Modelling the Demagnetization of H-Bar with Method of Moments.
Proceedings of the Automation 2019, 2019

Explicitness of Parameters Identification in Anhysteretic Curve of Magnetic Materials with Strong Perpendicular Anisotropy.
Proceedings of the Automation 2019, 2019

2018
Magnetostatic Modelling of Thin Layers Using the Method of Moments and Its Implementation in OCTAVE/MATLAB
Lecture Notes in Electrical Engineering 491, Springer, ISBN: 978-3-319-77984-3, 2018

Mobile Ferrograph System for Ultrahigh Permeability Alloys.
J. Autom. Mob. Robotics Intell. Syst., 2018

Two Step, Differential Evolution-Based Identification of Parameters of Jiles-Atherton Model of Magnetic Hysteresis Loops.
Proceedings of the Automation 2018, 2018

Key Factors Influencing the Accuracy of Harmonic Gears for Space Applications.
Proceedings of the Automation 2018, 2018

Determination of Initial Parameters for Inverse Tomography Transformation in Eddy Current Tomography.
Proceedings of the Automation 2018, 2018

FEM-Based Forward Eddy Current Tomography Transformation for Automotive Industry.
Proceedings of the Automation 2018, 2018

Digitally Controlled Thermoelectric Ammeter.
Proceedings of the Automation 2018, 2018

Microprocessor Based Assmann Psychrometer.
Proceedings of the Automation 2018, 2018

Dynamic NDT Sorting of Ferromagnetic Components Based on Fast Magnetic Signature Measurement.
Proceedings of the Automation 2018, 2018

Implementation of IT Solutions for the Quality Management System Based on ISO 13485 (2016) Standard in a Biomedical Company in Poland.
Proceedings of the Automation 2018, 2018

Modified Description of Magnetic Hysteresis in Jiles-Atherton Model.
Proceedings of the Automation 2018, 2018

Temperature Influence on Matteucci Effect in Fe-Based Amorphous Wire.
Proceedings of the Automation 2018, 2018

DC Magnetic Field Sensor Based on Matteucci Effect.
Proceedings of the Automation 2018, 2018

2017
Algorithms on improvement of accuracy of biofuel temperature measurement in thermo-anemometric flowmeter.
Proceedings of the 4th International Conference on Control, 2017

Calorimetrie flow meter of motor fuel With Inlet temperature regulation.
Proceedings of the 4th International Conference on Control, 2017

Vectorization of the Software for Modelling the Magnetostatic Properties of Thin Layers Using the Method of Moments.
Proceedings of the Automation 2017, 2017

Comparison of Jiles-Atherton and Bulk Ferromagnetic Hysteresis Models for Modelling the Magnetic Characteristics of Advanced Magnetic Materials.
Proceedings of the Automation 2017, 2017

Optimization of Interpolation for Improved Numeric Calculation of Forward Eddy Current Tomography Transformation.
Proceedings of the Automation 2017, 2017

Synthesis of Optimal Robust Regulator for Food Processing Facilities.
Proceedings of the Automation 2017, 2017

Active LR Integrator Circuit for Drift-Free Fluxmeter.
Proceedings of the Automation 2017, 2017

2016
The Additional Error of Inertial Sensors Induced by Hypersonic Flight Conditions.
Sensors, 2016

Technical B-H Saturation Magnetization Curve Models for SPICE, FEM and MoM Simulations.
J. Autom. Mob. Robotics Intell. Syst., 2016

Design of Piezoelectric Gravimeter for Automated Aviation Gravimetric System.
J. Autom. Mob. Robotics Intell. Syst., 2016

Automated System for Testing Ferromagnetic Materials.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Validation of the Model of Anhysteretic Magnetisation Curve of Isotropic Soft Magnetic Materials.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Setup for Stereovision Simulation for Mutual Navigation of Satellites Formation.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Assessment of Graphene Coatings Influence on Tribological Properties of Surfaces.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Piezoelectric Gravimeter of the Aviation Gravimetric System.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Methodology of Reduction of the Offset Voltage in Hall-Effect Sensors.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Research of Metal Film Resistor's Temperature Stability According to Their Nominal Wattage.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Test Stand for Measuring Magnetostriction Phenomena Under External Mechanical Stress with Foil Strain Gauges.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

Anisotropic Vector Preisach Model of Domain Rotation and Domain Wall Movement.
Proceedings of the Challenges in Automation, Robotics and Measurement Techniques, 2016

2015
Application of Jiles-Atherton Model for Modelling Magnetization Characteristics of Textured Electrical Steel Magnetized in Easy or Hard Axis.
Proceedings of the Progress in Automation, Robotics and Measuring Techniques, 2015

A Mathematical Model of the Thermo-Anemometric Flowmeter.
Sensors, 2015

Development of Graphene Based flow Sensor.
J. Autom. Mob. Robotics Intell. Syst., 2015

Design of the Novel Double-ring Dynamical Gravimeter.
J. Autom. Mob. Robotics Intell. Syst., 2015

New Methodology of Testing the Stress Dependence of Magnetic Hysteresis loop of the L17HMF Heat Resistant Steel Casting.
J. Autom. Mob. Robotics Intell. Syst., 2015

2014
FPGA Based Processing Unit for a Checkweigher.
Proceedings of the Recent Advances in Automation, 2014

Influence of Operating Conditions on Functional Properties of High Resolution Analog to Digital Converter.
Proceedings of the Recent Advances in Automation, 2014

Computational Problems Connected with Jiles-Atherton Model of Magnetic Hysteresis.
Proceedings of the Recent Advances in Automation, 2014

Measurement and Control System of the Plasmatron Plasma Reactor for Recovery of Metals from Printed Circuit Board Waste.
Proceedings of the Recent Advances in Automation, 2014

Identification of Thermal Response, of Plasmatron Plasma Reactor.
Proceedings of the Recent Advances in Automation, 2014

Measuring Station for Testing of Graphene Flow Sensors.
Proceedings of the Recent Advances in Automation, 2014

Digitally Controlled Current Transformer with Hall Sensor.
Proceedings of the Recent Advances in Automation, 2014

Sensitivity and Offset Voltage Testing in the Hall-Effect Sensors Made of Graphene.
Proceedings of the Recent Advances in Automation, 2014

Piezoceramic Transformer Based Ionization-Deionization System.
Proceedings of the Recent Advances in Automation, 2014

Influence of Stresses on Magnetic B-H Characteristics of X30Cr13 Corrosion Resisting Martensitic Steel.
Proceedings of the Recent Advances in Automation, 2014

Preisach Based Model for Predicting of Functional Characteristic of Fluxgate Sensors and Inductive Components.
Proceedings of the Recent Advances in Automation, 2014

Influence of the Environment on Operation of Checkweigher in Industrial Conditions.
Proceedings of the Recent Advances in Automation, 2014

Reliability and Efficiency of Differential Evolution Based Method of Determination of Jiles-Atherton Model Parameters for X30CR13 Corrosion Resisting Martensitic Steel.
J. Autom. Mob. Robotics Intell. Syst., 2014

Analog PID Controller with the Digitally Controlled Parameters.
Proceedings of the Intelligent Systems'2014, 2014

Design of Remote Laboratory dedicated to E2LP board for e-learning courses.
Proceedings of the 2014 Embedded Engineering Learning Platform Workshop, 2014

2013
E2LP: A Unified Embedded Engineering Learning Platform.
Proceedings of the 2013 Euromicro Conference on Digital System Design, 2013

2012
Application of Evolutionary Strategies for Optimisation of Parameters during the Modelling of the Magnetic Hysteresis Loop of the Construction Steel.
Proceedings of the IJCCI 2012 - Proceedings of the 4th International Joint Conference on Computational Intelligence, Barcelona, Spain, 5, 2012


  Loading...