Ryuta Sato

According to our database, Ryuta Sato authored at least 24 papers between 2007 and 2025.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of three.

2025

Evaluation of Coupling System Characteristics Considering Contact Conditions Between Shaft and Borehole Surfaces.

Yuta Kondo, Ryuta Sato, Taichi Sasaki

Int. J. Autom. Technol., July, 2025

Editorial: Advanced Positioning Technology: Mechanisms, Actuators, Sensors, Control, Measurement, and Industrial Applications.

Katsushi Furutani, Chun-Hong Park, Kaiji Sato, Ryuta Sato, Yung-Tien Liu

Int. J. Autom. Technol., July, 2025

Positioning Command Design Method to Minimize Residual Vibration and Positioning Time.

Yume Dobashi, Ryuta Sato

Int. J. Autom. Technol., July, 2025

Simulation Technique for Coupled Vibration Between Machine Tool Dynamics and Cutting Force: A Method by Simscape Multibody Model and Boolean Operation Between Tool and Workpiece Geometries.

Ryuta Sato, Yu Igarashi

Int. J. Autom. Technol., January, 2025

2022

Power Consumption Simulation of Servo Motors Focusing on the Influence of Mechanical Vibration on Motor Efficiency.

Massimiliano Rigacci, Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2022

2021

Vibration Mode and Motion Trajectory Simulations of an Articulated Robot by a Dynamic Model Considering Joint Bearing Stiffness.

Ryuta Sato, Yuya Ito, Shigeto Mizuura, Keiichi Shirase

Int. J. Autom. Technol., 2021

2020

Identification Method of Error Motions and Geometric Errors of a Rotary Axis by R-Test.

Takaaki Kenno, Ryuta Sato, Keiichi Shirase, Shigemasa Natsume, Henny Spaan

Int. J. Autom. Technol., 2020

2019

Improvement of Simultaneous 5-Axis Controlled Machining Accuracy by CL-Data Modification.

Ryuta Sato, Kiichi Morishita, Isamu Nishida, Keiichi Shirase, Masanobu Hasegawa, Akira Saito, Takayuki Iwasaki

Int. J. Autom. Technol., 2019

Effect of CAD/CAM Post Process on S-Shaped Machining Test for Five-Axis Machining Center.

Yukitoshi Ihara, Koichiro Takubo, Tatsuo Nakai, Ryuta Sato

Int. J. Autom. Technol., 2019

2018

Geometric Error Compensation of Five-Axis Machining Centers Based on On-Machine Workpiece Measurement.

Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2018

Motion Accuracy Enhancement of Five-Axis Machine Tools by Modified CL-Data.

Ryuta Sato, Shogo Hasegawa, Keiichi Shirase, Masanobu Hasegawa, Akira Saito, Takayuki Iwasaki

Int. J. Autom. Technol., 2018

Customized End Milling Operation of Dental Artificial Crown Without CAM Operation.

Isamu Nishida, Ryo Tsuyama, Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2018

2017

Evaluation Method for Behavior of Rotary Axis Around Motion Direction Changing.

Tadahiro Nishiguchi, Shogo Hasegawa, Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2017

2016

Machine Bed Support with Sliding Surface for Improving the Motion Accuracy.

Yusaku Shirahama, Ryuta Sato, Yusuke Takasuka, Hidenori Nakatsuji, Keiichi Shirase

Int. J. Autom. Technol., 2016

2015

Analysis of the Coupled Vibration Between Feed Drive Systems and Machine Tool Structure.

Ryuta Sato, Gen Tashiro, Keiichi Shirase

Int. J. Autom. Technol., 2015

Development of a CAD-CAM Interaction System to Generate a Flexible Machining Process Plan.

Mohammad Mi'radj Isnaini, Yusaku Shinoki, Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2015

2014

Finished Surface Simulation Method to Predicting the Effects of Machine Tool Motion Errors.

Ryuta Sato, Yuki Sato, Keiichi Shirase, Gianni Campatelli, Antonio Scippa

Int. J. Autom. Technol., 2014

Tool Motion Control Referring to Voxel Information of Removal Volume Voxel Model to Achieve Autonomous Milling Operation.

Tomokazu Kobayashi, Toshihiko Hirooka, Atsushi Hakotani, Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2014

2013

Surface Roughness Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling Operation.

Toshihiko Hirooka, Tomokazu Kobayashi, Atsushi Hakotani, Ryuta Sato, Keiichi Shirase

Int. J. Autom. Technol., 2013

2012

Mathematical Model of a CNC Rotary Table Driven by a Worm Gear.

Ryuta Sato

Int. J. Intell. Mechatronics Robotics, 2012

Generation Mechanism of Quadrant Glitches and Compensation for it in Feed Drive Systems of NC Machine Tools.

Ryuta Sato

Int. J. Autom. Technol., 2012

2011

Motion Trajectory Measurement of NC Machine Tools Using Accelerometers.

Ryuta Sato, Kotaro Nagaoka

Int. J. Autom. Technol., 2011

Feed Drive Simulator.

Ryuta Sato

Int. J. Autom. Technol., 2011

2007

High Performance Motion Control of Rotary Table for 5-Axis Machining Centers.

Ryuta Sato, Masaomi Tsutsumi

Int. J. Autom. Technol., 2007