Shisong Li

Orcid: 0000-0002-2509-5523

According to our database1, Shisong Li authored at least 24 papers between 2011 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Rail Web Buried Defect Location and Quantification Methods in Hybrid High-Order Guided Wave Detection.
IEEE Trans. Instrum. Meas., 2024

2023
Estimation of Wideband Multi-Component Phasors Considering Signal Damping.
Sensors, August, 2023

Design of the Tsinghua Tabletop Kibble Balance.
IEEE Trans. Instrum. Meas., 2023

Supraharmonics Measurement Based on Colored Noise Suppressed Matrix Pencil Method.
IEEE Access, 2023

Quantification Method of Rail Web Buried Defect using Hybrid High-Order Guided Waves.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
Magnetic Uncertainties for Compact Kibble Balances: An Investigation.
IEEE Trans. Instrum. Meas., 2022

Development of a Physics-Informed Doubly Fed Cross-Residual Deep Neural Network for High-Precision Magnetic Flux Leakage Defect Size Estimation.
IEEE Trans. Ind. Informatics, 2022

2021
A Two-Stage Wavelet Decomposition Method for Instantaneous Power Quality Indices Estimation Considering Interharmonics and Transient Disturbances.
IEEE Trans. Instrum. Meas., 2021

A SVD-Based Synchrophasor Estimator for P-Class PMUs With Improved Immune From Interharmonic Tones.
IEEE Access, 2021

2020
From μ<sub>0</sub> to e: A Survey of Major Impacts for Electrical Measurements in Recent SI Revision.
IEEE Trans. Instrum. Meas., 2020

A Simple Improvement for Permanent Magnet Systems for Kibble Balances: More Flat Field at Almost No Cost.
IEEE Trans. Instrum. Meas., 2020

An Investigation of Magnetic Hysteresis Error in Kibble Balances.
IEEE Trans. Instrum. Meas., 2020

2017
Designing Model and Optimization of the Permanent Magnet for Joule Balance NIM-2.
IEEE Trans. Instrum. Meas., 2017

A Five-Freedom Active Damping and Alignment Device Used in the Joule Balance.
IEEE Trans. Instrum. Meas., 2017

The Design and Construction of the Joule Balance NIM-2.
IEEE Trans. Instrum. Meas., 2017

A three-core power cable online monitoring system based on phase current sensing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2015
Coils and the Electromagnet Used in the Joule Balance at the NIM.
IEEE Trans. Instrum. Meas., 2015

The NIM Inertial Mass Measurement Project.
IEEE Trans. Instrum. Meas., 2015

The Improvement of Joule Balance NIM-1 and the Design of New Joule Balance NIM-2.
IEEE Trans. Instrum. Meas., 2015

2014
Construction, Measurement, Shimming, and Performance of the NIST-4 Magnet System.
IEEE Trans. Instrum. Meas., 2014

2013
Mutual Inductance Measurement of the Superconducting Coil for the Joule Balance.
IEEE Trans. Instrum. Meas., 2013

2012
A Compensation Method With a Standard Square Wave for Precise DC Measurement of Mutual Inductance for Joule Balance.
IEEE Trans. Instrum. Meas., 2012

2011
Recent Development on the Joule Balance at NIM.
IEEE Trans. Instrum. Meas., 2011

A Compensation Method to Measure the Mutual Inductance at Low Frequency.
IEEE Trans. Instrum. Meas., 2011


  Loading...