Z. Q. Zhu

According to our database1, Z. Q. Zhu authored at least 35 papers between 2008 and 2019.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2019
Analysis of Open-Circuit DC Winding Induced Voltage in Partitioned-Stator Hybrid-Excited Switched-Flux Machine.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Reduction of Open-Circuit DC Winding Induced Voltage in Hybrid-Excited Switched -Flux Permanent Magnet Machine.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

2018
Analysis of Air-Gap Field Modulation and Magnetic Gearing Effect in Fractional-Slot Concentrated-Winding Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2018

Analysis of Dual Three-Phase Permanent-Magnet Synchronous Machines With Different Angle Displacements.
IEEE Trans. Ind. Electron., 2018

Comparative analysis of variable flux reluctance machines with double- and single-layer concentrated armature windings.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

2017
Initial Rotor Position Estimation Using Zero-Sequence Carrier Voltage for Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2017

Optimum Injected Harmonics Into Magnet Shape in Multiphase Surface-Mounted PM Machine for Maximum Output Torque.
IEEE Trans. Ind. Electron., 2017

A Novel Series Power Quality Controller With Reduced Passive Power Filter.
IEEE Trans. Ind. Electron., 2017

Improved Rotor Position Estimation Accuracy by Rotating Carrier Signal Injection Utilizing Zero-Sequence Carrier Voltage for Dual Three-Phase PMSM.
IEEE Trans. Ind. Electron., 2017

2016
A Novel Zero-Sequence Model-Based Sensorless Method for Open-Winding PMSM With Common DC Bus.
IEEE Trans. Ind. Electron., 2016

Novel Square-Wave Signal Injection Method Using Zero-Sequence Voltage for Sensorless Control of PMSM Drives.
IEEE Trans. Ind. Electron., 2016

Carrier Signal Injection-Based Sensorless Control for Permanent-Magnet Synchronous Machine Drives Considering Machine Parameter Asymmetry.
IEEE Trans. Ind. Electron., 2016

Novel Carrier Signal Injection Method Using Zero-Sequence Voltage for Sensorless Control of PMSM Drives.
IEEE Trans. Ind. Electron., 2016

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.
IEEE Trans. Ind. Electron., 2016

Improved Sensorless Control of Switched-Flux Permanent-Magnet Synchronous Machines Based on Different Winding Configurations.
IEEE Trans. Ind. Electron., 2016

Novel Consequent-Pole Hybrid Excited Machine With Separated Excitation Stator.
IEEE Trans. Ind. Electron., 2016

2015
Torque Improvement of Dual Three-Phase Permanent-Magnet Machine With Third-Harmonic Current Injection.
IEEE Trans. Ind. Electron., 2015

Improved Rotor Position Estimation in Sensorless-Controlled Permanent-Magnet Synchronous Machines Having Asymmetric-EMF With Harmonic Compensation.
IEEE Trans. Ind. Electron., 2015

A Novel Integrated Power Quality Controller for Microgrid.
IEEE Trans. Ind. Electron., 2015

Reliability assessment of fault tolerant permanent magnet AC drives.
Proceedings of the IECON 2015, 2015

2014
Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2014

Average Torque Improvement of Interior Permanent-Magnet Machine Using Third Harmonic in Rotor Shape.
IEEE Trans. Ind. Electron., 2014

Determination of Maximum Electromagnetic Torque in PM Brushless Machines Having Two-Segment Halbach Array.
IEEE Trans. Ind. Electron., 2014

Investigation of Saliency in a Switched-Flux Permanent-Magnet Machine Using High-Frequency Signal Injection.
IEEE Trans. Ind. Electron., 2014

Simplified Analytical Optimization and Comparison of Torque Densities Between Electrically Excited and Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2014

Analysis of Eccentricity in Permanent-Magnet Tubular Machines.
IEEE Trans. Ind. Electron., 2014

2012
Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines.
IEEE Trans. Ind. Electron., 2012

Analytical modeling of eddy current loss in retaining sleeve of surface-mounted PM machines accounting for influence of slot opening.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

Investigation of PWMs on vibration and noise in SRM with sinusoidal bipolar excitation.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

2011
Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control Methods.
IEEE Trans. Ind. Electron., 2011

Saliency investigation of PM brushless AC motors for high-frequency carrier signal injection-based sensorless control.
Proceedings of the 17th International Conference on Automation and Computing, 2011

2010
Robust Synchronization by Time-Varying Impulsive Control.
IEEE Trans. Circuits Syst. II Express Briefs, 2010

Analysis of vibration reduction level in an 8/6 switched reluctance machine by active vibration cancellation.
J. Zhejiang Univ. Sci. C, 2010

Electrical behavior on packaging module for the novel photoelectric sensor.
Proceedings of the 5th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2010

2008
Influence of PWM on the Proximity Loss in Permanent Magnet Brushless AC Machines.
Proceedings of the Industry Applications Society Annual Meeting, 2008


  Loading...