Atsushi Domae

According to our database, Atsushi Domae authored at least 7 papers between 2011 and 2017.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2017

Evaluation of Automatic Coaxial Mechanical Scanners for Precise Resistance and Capacitance Measurements.

Takehiko Oe, Atsushi Domae, Norihiko Sakamoto, Nobu-hisa Kaneko

IEEE Trans. Instrum. Meas., 2017

Experimental Demonstration of Current Dependence Evaluation of Voltage Divider Based on Quantized Hall Resistance Voltage Divider.

Atsushi Domae, Takehiko Oe, Syogo Kiryu, Nobu-hisa Kaneko

IEEE Trans. Instrum. Meas., 2017

2015

Development of 7.75 Ratio Voltage Divider Toward a Precise Measurement of Decade Resistance Based on the AC Quantized Hall Resistance.

Atsushi Domae, Norihiko Sakamoto, Syogo Kiryu, Nobu-hisa Kaneko

IEEE Trans. Instrum. Meas., 2015

Development and Evaluation of High-Stability Metal-Foil Resistor With a Resistance of 1 kΩ.

Atsushi Domae, Takayuki Abe, Masaya Kumagai, Matsuo Zama, Takehiko Oe, Nobu-hisa Kaneko

IEEE Trans. Instrum. Meas., 2015

2013

First Attempt to Develop an On-Chip Double-Shielded QHR Device for Use in AC Measurements.

Nobu-hisa Kaneko, Atsushi Domae, Takehiko Oe, Jürgen Schurr, Franz-Josef Ahlers, Shogo Kiryu

IEEE Trans. Instrum. Meas., 2013

Characterization of 100-Ω Metal Foil Standard Resistors.

Atsushi Domae, Takehiko Oe, Masaya Kumagai, Matsuo Zama, Nobu-hisa Kaneko

IEEE Trans. Instrum. Meas., 2013

2011

Development of Quadrature Bridge for AC QHR Measurements at Measurement Frequency of 1.592 kHz.

Atsushi Domae, Yasuhiro Nakamura, Takehiko Oe

IEEE Trans. Instrum. Meas., 2011