Chao Gong
Orcid: 0000-0001-5126-2332Affiliations:
- Northwestern Polytechnical University, School of Automation, Shaanxi Key Laboratory of Small and Special Electrical Machine and Drive Technology, Xi'an, China
- University of Alberta, Department of Electrical and Computer Engineering, Edmonton, Canada (2022 - 2023)
- University of York, Department of Electronic Engineering, York, UK (PhD 2021)
- University of Liverpool, Department of Electrical Engineering and Electronics, Liverpool, UK
- Northwestern Polytechnical University, Xi'an, China (2010 - 2016)
According to our database1,
Chao Gong
authored at least 19 papers
between 2018 and 2023.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2023
An Improved Current Prediction Model for PMSM Drives Under Single Open-Phase Fault Considering Floating Motor Neutral.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Load Change Assessment-Based Feedforward Compensation for FCS-MPCC Used in PMSMs Considering Load Disturbances.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Elimination of Digital Delay Effect on Rotor Position for Two-Step Finite Control Set MPCC Used in PMSMs.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
MPC-Based Coordination Control of Dual Direct-Drive Permanent Magnet Motors Used in Coal Mining Belt Conveyors.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Analysis of Voltage Drop and Low-Accuracy Position Estimation Issues for High-Speed PMMs Used in Electric Submersible Pumps.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Novel Segmented-Prediction-Based FCS-MPCC for Low-Control-Frequency EV EESMs with Uncertain Mutual Inductance Considered.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
2022
Precise Cumulative Error Calibration With Delay Effects Rejected for Incremental Encoders Used in High-Speed PMSMs.
IEEE Trans. Ind. Electron., 2022
Robust MTPA Control for Novel EV-WFSMs Based on Pure SM Observer Based Multistep Inductance Identification Strategy.
IEEE Trans. Ind. Electron., 2022
2021
Hybrid DC-Bus Capacitor Discharge Strategy Using Internal Windings and External Bleeder for Surface-Mounted PMSM-Based EV Powertrains in Emergency.
IEEE Trans. Ind. Electron., 2021
High Frequency Response Current Self-Demodulation Method for Sensorless Control of Interior Permanent Magnet Synchronous Motor.
IEEE Access, 2021
2020
Reliable Winding-Based DC-Bus Capacitor Discharge Technique Over Full-Speed Range for IPMSM Drive in Electric Vehicles Without Position Sensor.
IEEE Trans. Ind. Electron., 2020
An Improved Delay-Suppressed Sliding-Mode Observer for Sensorless Vector-Controlled PMSM.
IEEE Trans. Ind. Electron., 2020
Modeling, Analysis, and Attenuation of Uncontrolled Generation for IPMSM-Based Electric Vehicles in Emergency.
IEEE Trans. Ind. Electron., 2020
Novel Compensation Strategy for Calculation Delay of Finite Control Set Model Predictive Current Control in PMSM.
IEEE Trans. Ind. Electron., 2020
2019
A DC-Bus Capacitor Discharge Strategy for PMSM Drive System With Large Inertia and Small System Safe Current in EVs.
IEEE Trans. Ind. Informatics, 2019
A Winding-based DC-Bus Capacitor Discharge Strategy for PMSM Drive System in EVs Considering Position Sensor Fault.
Proceedings of the IECON 2019, 2019
Parameter Dependency Analysis of Uncontrolled Generation for IPMSMs in Electric Vehicles.
Proceedings of the IECON 2019, 2019
2018
IPMSM Model Predictive Control in Flux-Weakening Operation Using an Improved Algorithm.
IEEE Trans. Ind. Electron., 2018
Proceedings of the IECON 2018, 2018