Dieter Gerling

According to our database, Dieter Gerling authored at least 26 papers between 2012 and 2023.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2023

Performance Analysis of a Five-Phase Harmonic-Excited Synchronous Machine.

Sukanya Kamboj, Dieter Gerling, Arjun Vijay, Gurakuq Dajaku

Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Analysis of a Five Phase PMSM with Third Harmonic Injection.

Arber Dajaku, Dieter Gerling

Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Automated Design of Multi-Phase FSCWs with the Star of Slots.

Daniel Alban, Dieter Gerling

Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022

Preliminary Evaluation of Induction Switched Reluctance Machine (ISRM) for Electric Vehicle Application.

Meysam Azamian Jazi, Mohammadali Abbasian, Dieter Gerling

IEEE Access, 2022

Modelling and reduction of current harmonics in permanent magnet synchronous machines during active noise cancellation.

Michael Schreiber, Simon Hecker, Stefan Sentpali, Dieter Gerling

Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2022

2020

Improved Online Maximum-Torque-Per-Ampere Algorithm for Speed Controlled Interior Permanent Magnet Synchronous Machine.

Zexiu Han, Jinglin Liu, Weibin Yang, Daniel Bachinski Pinhal, Nikolaus Reiland, Dieter Gerling

IEEE Trans. Ind. Electron., 2020

Compensation of Saliency Tracking Static Estimation Errors in Sensor Fault Tolerant IPMSM Drives.

Kilian Rehorik, Benjamin Grothmann, Abdelrahmen Elsman, Dieter Gerling, Fabio Giulii Capponi

Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

2019

Fast Response Model Predictive Torque and Flux Control With Low Calculation Effort for PMSMs.

Yuanlin Wang, Wei Xie, Xiaocan Wang, Weibin Yang, Manfeng Dou, Shoujun Song, Dieter Gerling

IEEE Trans. Ind. Informatics, 2019

ISCAD - nachhaltige Traktionsantriebe hoher Leistung bei 48 V.

Dieter Gerling, Oleg Moros, Benjamin Rubey, Andreas Baumgardt, Andreas Greifelt

Elektrotech. Informationstechnik, 2019

Performance Map Calculation of a Salient-Pole Synchronous Motor with Hairpin Winding.

Daniel Bachinski Pinhal, Dieter Gerling

Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019

Analytic Calculation of Space Vector Modulation Harmonic Content for Multiphase Inverters with Single Frequency Output.

Matthias Ippisch, Dieter Gerling

Proceedings of the IECON 2019, 2019

2018

A Precise Voltage Distortion Compensation Strategy for Voltage Source Inverters.

Yuanlin Wang, Wei Xie, Xiaocan Wang, Dieter Gerling

IEEE Trans. Ind. Electron., 2018

Determination of eddy current losses in permanent magnets of SPMSM with concentrated windings: A hybrid loss calculation method and experimental verification.

Tobias Gerlach, Lukas Rabenstein, Armin Dietz, Andreas Kremser, Dieter Gerling

Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

2017

Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives.

Yuanlin Wang, Xiaocan Wang, Wei Xie, Fengxiang Wang, Manfeng Dou, Ralph M. Kennel, Robert D. Lorenz, Dieter Gerling

IEEE Trans. Ind. Electron., 2017

2016

Comparison of Two Different IPM Traction Machines With Concentrated Winding.

Gurakuq Dajaku, Harald Hofmann, Fatmir Hetemi, Xhevat Dajaku, Wei Xie, Dieter Gerling

IEEE Trans. Ind. Electron., 2016

Analysis of inverter effects on machine iron losses in a traction drive.

Sven Luthardt, Stefan Schmitz, Axel Heitmann, Dieter Gerling

Proceedings of the IECON 2016, 2016

2015

Finite-Control-Set Model Predictive Torque Control With a Deadbeat Solution for PMSM Drives.

Wei Xie, Xiaocan Wang, Fengxiang Wang, Wei Xu, Ralph M. Kennel, Dieter Gerling, Robert D. Lorenz

IEEE Trans. Ind. Electron., 2015

DB-DTFC as loss minimizing control for synchronous reluctance drives.

Michael Saur, Bastian Lehner, Frank Hentschel, Dieter Gerling, Robert D. Lorenz

Proceedings of the IECON 2015, 2015

New flexible harmonic cost effective concentrated winding topology.

Oleg Moros, Dieter Gerling

Proceedings of the IECON 2015, 2015

New high voltage 2-pole concentrated winding and corresponding rotor design for induction machines.

Oleg Moros, Gurakuq Dajaku, Christian Klusmann, Dieter Gerling

Proceedings of the IECON 2015, 2015

Comparison of state-of-the-art high-speed high-power machines: Research study including a design example of a 50000 rpm induction machine.

Hans-Christian Lahne, Dieter Gerling

Proceedings of the IECON 2015, 2015

Optimal electrical drive configuration to use in a Do 128-6 aircraft taking into account the electromagnetic, mechanical and aerodynamic designs.

Marius-Silviu Donea, Dieter Gerling

Proceedings of the IECON 2015, 2015

Highly flexible connection unit for electrical machines with concentrated windings.

Jan Richnow, Dieter Gerling, Rolf Graf, Philipp Uhlmann, Peer Stenzel

Proceedings of the IEEE International Conference on Industrial Technology, 2015

2013

S-parameters characterization and sequence model of three-phase EMI filter.

Junsheng Wei, Dieter Gerling, Marek Galek

Proceedings of the IECON 2013, 2013

Vibration and noise analyses of canned switched reluctance machines with different winding topologies.

Christian Laudensack, Dieter Gerling

Proceedings of the AFRICON 2013, Pointe aux Piments, Mauritius, September 9-12, 2013, 2013

2012

Experimental verification of energy efficiency enhancement in power electronics at partial load.

Klaus Muehlbauer, Dieter Gerling

Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012