Eduardo Cabal-Yepez
Orcid: 0000-0001-6903-4434
According to our database1,
Eduardo Cabal-Yepez
authored at least 61 papers
between 2007 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2024
Parallel Ictal-Net, a Parallel CNN Architecture with Efficient Channel Attention for Seizure Detection.
Sensors, February, 2024
2023
An Experimental Study of the Empirical Identification Method to Infer an Unknown System Transfer Function.
Robotics, August, 2023
Comput. Electr. Eng., April, 2023
2022
Walsh-Hadamard Domain-Based Intelligent Online Fault Diagnosis of Broken Rotor Bars in Induction Motors.
IEEE Trans. Instrum. Meas., 2022
IEEE Access, 2022
2021
Open-Circuit Fault Diagnosis in Power Inverters Through Currents Analysis in Time Domain.
IEEE Trans. Instrum. Meas., 2021
Sensors, 2021
Introduction to the special section on image processing in security applications (VSI-ipsa).
Comput. Electr. Eng., 2021
Broken Rotor Bar Detection in Induction Motors through Information Entropy Analysis on the Start-up Transient and Steady-State Current Signals.
Proceedings of the IECON 2021, 2021
2020
Automatic Early Broken-Rotor-Bar Detection and Classification Using Otsu Segmentation.
IEEE Access, 2020
2019
IEEE Trans. Image Process., 2019
IET Image Process., 2019
Artificial Intelligence to Design a Mask Insensible to the Distance From the Camera to the Scene Objects.
IEEE Access, 2019
Proceedings of the IEEE Sensors Applications Symposium, 2019
Proceedings of the IECON 2019, 2019
2018
Signal Image Video Process., 2018
Cost function to analyze the passband and the stopband of Digital Biquadratic Filters.
Digit. Signal Process., 2018
IEEE Access, 2018
Mathematical Models to Predict and Analyze the Energy Consumption of a Domestic Refrigerator for Different Position of the Shelves.
IEEE Access, 2018
2017
Novel FPGA-based Methodology for Early Broken Rotor Bar Detection and Classification Through Homogeneity Estimation.
IEEE Trans. Instrum. Meas., 2017
Digit. Signal Process., 2017
Comput. Electr. Eng., 2017
2016
Res. Comput. Sci., 2016
Comput. Electr. Eng., 2016
Detection of Faults in Induction Motors Using Texture-Based Features and Fuzzy Inference.
Proceedings of the Advances in Computational Intelligence, 2016
Proceedings of the Image and Signal Processing - 7th International Conference, 2016
FPGA-based hardware processing unit for time-frequency representation of a signal through Wigner-Ville distribution.
Proceedings of the 2016 International Conference on Electronics, 2016
Proceedings of the 2016 International Conference on Electronics, 2016
2015
Comput. Electr. Eng., 2015
Proceedings of the 23rd IEEE Annual International Symposium on Field-Programmable Custom Computing Machines, 2015
2014
Comput. Electr. Eng., 2014
Extended depth of field in images through complex amplitude pre-processing and optimized digital post-processing.
Comput. Electr. Eng., 2014
Comput. Electr. Eng., 2014
Experimental system for teaching induction motor faults during the startup transient and steady state.
Comput. Appl. Eng. Educ., 2014
Proceedings of the 2014 International Conference on ReConFigurable Computing and FPGAs, 2014
Gabor and the Wigner-Ville transforms for broken rotor bars detection in induction motors.
Proceedings of the 24th International Conference on Electronics, 2014
2013
Reconfigurable Monitoring System for Time-Frequency Analysis on Industrial Equipment Through STFT and DWT.
IEEE Trans. Ind. Informatics, 2013
Proceedings of the IECON 2013, 2013
2012
IEEE Trans. Instrum. Meas., 2012
Novel methodology for improving performance of sensorless speed observers in induction motors at variable load conditions.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
Proceedings of the 9th International Conference on Electrical Engineering, 2012
2011
FPGA-Based Online Detection of Multiple Combined Faults in Induction Motors Through Information Entropy and Fuzzy Inference.
IEEE Trans. Ind. Electron., 2011
The Application of High-Resolution Spectral Analysis for Identifying Multiple Combined Faults in Induction Motors.
IEEE Trans. Ind. Electron., 2011
FPGA-Based Smart Sensor for Online Displacement Measurements Using a Heterodyne Interferometer.
Sensors, 2011
Reconfigurable FPGA-Based Unit for Singular Value Decomposition of Large m x n Matrices.
Proceedings of the 2011 International Conference on Reconfigurable Computing and FPGAs, 2011
2010
FPGA-Based Vibration Analyzer for Continuous CNC Machinery Monitoring With Fused FFT-DWT Signal Processing.
IEEE Trans. Instrum. Meas., 2010
FPGA-Based Multiple-Channel Vibration Analyzer for Industrial Applications in Induction Motor Failure Detection.
IEEE Trans. Instrum. Meas., 2010
Open-architecture system based on a reconfigurable hardware-software multi-agent platform for CNC machines.
J. Syst. Archit., 2010
Novel hardware processing unit for dynamic on-line entropy estimation of discrete time information.
Digit. Signal Process., 2010
FPGA-Based Online Detection of Multiple-Combined Faults through Information Entropy and Neural Networks.
Proceedings of the ReConFig'10: 2010 International Conference on Reconfigurable Computing and FPGAs, 2010
2009
IEEE Trans. Instrum. Meas., 2009
Novel Oversampling Technique for Improving Signal-to-Quantization Noise Ratio on Accelerometer-Based Smart Jerk Sensors in CNC Applications.
Sensors, 2009
Sensors, 2009
FPGA-Based Online Induction Motor Multiple-Fault Detection with Fused FFT and Wavelet Analysis.
Proceedings of the ReConFig'09: 2009 International Conference on Reconfigurable Computing and FPGAs, 2009
2008
FPGA-based system for frequency detection of the main periodic component in time series information.
Digit. Signal Process., 2008
2007