Fathy Ismail

According to our database, Fathy Ismail authored at least 23 papers between 1998 and 2017.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2017

A regulated boosting technique for material fatigue property prognostics.

Dezhi Li, Wilson Wang, Fathy Ismail

Eng. Appl. Artif. Intell., 2017

2015

An Enhanced Bispectrum Technique With Auxiliary Frequency Injection for Induction Motor Health Condition Monitoring.

Dezhi Li, Wilson Wang, Fathy Ismail

IEEE Trans. Instrum. Meas., 2015

A fuzzy-filtered grey network technique for system state forecasting.

Dezhi Li, Wilson Wang, Fathy Ismail

Soft Comput., 2015

A selective boosting technique for pattern classification.

Dezhi Li, Wilson Wang, Fathy Ismail

Neurocomputing, 2015

2014

A Mutated Particle Filter Technique for System State Estimation and Battery Life Prediction.

Dezhi Li, Wilson Wang, Fathy Ismail

IEEE Trans. Instrum. Meas., 2014

An evolving fuzzy neural predictor for multi-dimensional system state forecasting.

Dezhi Li, Wilson Wang, Fathy Ismail

Neurocomputing, 2014

2013

Fuzzy Neural Network Technique for System State Forecasting.

Dezhi Li, Wilson Wang, Fathy Ismail

IEEE Trans. Cybern., 2013

Modeling, Simulation, and Optimization of Machining Polymer Infiltrated Calcium Polyphosphate.

Theodoros Vasilopoulos, Kaan Erkorkmaz, Fathy Ismail, Robert M. Pilliar

Int. J. Autom. Technol., 2013

Enhanced fuzzy-filtered neural networks for material fatigue prognosis.

Dezhi Li, Wilson Wang, Fathy Ismail

Appl. Soft Comput., 2013

2012

An enhanced GA technique for system optimization.

Dezhi Li, Wilson Wang, Fathy Ismail

Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2008

Bearing Fault Diagnostics Based on Reconstructed Features.

Jie Liu, Shahab Ghafari, Wilson Wang, M. Farid Golnaraghi, Fathy Ismail

Proceedings of the Industry Applications Society Annual Meeting, 2008

2007

Mechanistic modelling of 5-axis milling using an adaptive and local depth buffer.

David Roth, Paul J. Gray, Fathy Ismail, Sanjeev Bedi

Comput. Aided Des., 2007

2006

Tool path planning for 3-axis machining.

Armando Roman, Sanjeev Bedi, Fathy Ismail

Int. J. Manuf. Res., 2006

2005

Arc-intersect method for 5-axis tool positioning.

Paul J. Gray, Sanjeev Bedi, Fathy Ismail

Comput. Aided Des., 2005

2004

A neuro-fuzzy approach to gear system monitoring.

Wilson Wang, Fathy Ismail, M. Farid Golnaraghi

IEEE Trans. Fuzzy Syst., 2004

Graphics-assisted Rolling Ball Method for 5-axis surface machining.

Paul J. Gray, Fathy Ismail, Sanjeev Bedi

Comput. Aided Des., 2004

2003

Mechanistic modelling of the milling process using an adaptive depth buffer.

David Roth, Fathy Ismail, Sanjeev Bedi

Comput. Aided Des., 2003

Rolling ball method for 5-axis surface machining.

Paul J. Gray, Sanjeev Bedi, Fathy Ismail

Comput. Aided Des., 2003

Cusp modeling for 5-axis surface machining.

Paul J. Gray, Fathy Ismail, Sanjeev Bedi

Proceedings of the Eighth ACM Symposium on Solid Modeling and Applications 2003, 2003

2001

Surface swept by a toroidal cutter during 5-axis machining.

David Roth, Sanjeev Bedi, Fathy Ismail, Stephen Mann

Comput. Aided Des., 2001

2000

Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces.

Andrew Warkentin, Fathy Ismail, Sanjeev Bedi

Comput. Aided Geom. Des., 2000

1999

Generation of swept volumes of toroidal endmills in five-axis motion using space curves.

David Roth, Sanjeev Bedi, Fathy Ismail

Proceedings of the Fifth ACM Symposium on Solid Modeling and Applications, 1999

1998

Intersection approach to multi-point machining of sculptured surfaces.

Andrew Warkentin, Fathy Ismail, Sanjeev Bedi

Comput. Aided Geom. Des., 1998