Gerhard Hirt

According to our database, Gerhard Hirt authored at least 16 papers between 2007 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2024

Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling.

Christian Idzik, Alexander Krämer, Gerhard Hirt, J. Lohmar

J. Intell. Manuf., April, 2024

2021

High Precision Thickness Control in a Cold Rolling Mill using a Non-Linear Roll Stand Deflection Model.

Christopher Schulte, Xinyang Li, Dirk Abel, Gerhard Hirt

Proceedings of the 2021 European Control Conference, 2021

2020

Action Discretization for Robot Arm Teleoperation in Open-Die Forging.

Mohamed Behery, Matteo Tschesche, Fridtjof Rudolph, Gerhard Hirt, Gerhard Lakemeyer

Proceedings of the 2020 IEEE International Conference on Systems, Man, and Cybernetics, 2020

Model Predictive Control of an Overactuated Roll Gap with a Moving Manipulated Variable.

Matthias Wehr, Sven Schätzler, Dirk Abel, Gerhard Hirt

Proceedings of the 2020 American Control Conference, 2020

2019

Sliding Mode Control of Piezoelectric Stack Actuators for Roll Gap Adjustment in a Cold Rolling Mill.

Matthias Wehr, Sven Stockert, Christina Ionescu, Dirk Abel, Gerhard Hirt

Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2019

2018

Model Predictive Roll Gap Control in Cold Rolling with Piezoelectric Actuators.

Matthias Wehr, Sven Stockert, Dirk Abel, Gerhard Hirt

Proceedings of the IEEE Conference on Control Technology and Applications, 2018

2017

Improvement of the dishing process in ring rolling using conical guide rolls.

Joachim Seitz, Frauke Kordtomeikel, Gerhard Hirt

Prod. Eng., 2017

On the growth of intermetallic phases by heat treatment of friction stir welded aluminum steel joints.

Andreas Naumov, Chris Mertin, Frederik Korte, Gerhard Hirt, Uwe Reisgen

Prod. Eng., 2017

2014

Hot rolling of AISI 304 tailored strips produced by twin roll strip casting.

Michele Vidoni, Markus Daamen, J. Gastreich, N. Offermanns, Gerhard Hirt

Prod. Eng., 2014

Accounting for shear deformation in fast models for plate rolling.

Simon Seuren, Joachim Seitz, Alexander Krämer, Markus Bambach, Gerhard Hirt

Prod. Eng., 2014

2013

Manufacturing dish shaped rings on radial-axial ring rolling mills.

Joachim Seitz, Vahid Jenkouk, Gerhard Hirt

Prod. Eng., 2013

2011

Numerical and experimental analysis of electric conductive heating for micro warm coining of stainless steel.

Kunning Zhao, Burkhard Wietbrock, Gerhard Hirt

Prod. Eng., 2011

Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts.

Alexander Göttmann, Jö Diettrich, Georg Bergweiler, Markus Bambach, Gerhard Hirt, Peter Loosen, Reinhart Poprawe

Prod. Eng., 2011

Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production.

Babak Taleb Araghi, Alexander Göttmann, Markus Bambach, Gerhard Hirt, Georg Bergweiler, Jö Diettrich, Marius Steiners, Alireza Saeed-Akbari

Prod. Eng., 2011

2009

Strategies to improve the geometric accuracy in asymmetric single point incremental forming.

Markus Bambach, Babak Taleb Araghi, Gerhard Hirt

Prod. Eng., 2009

2007

Material flow determination for radial flexible profile ring rolling.

Ingo Tiedemann, Gerhard Hirt, Reiner Kopp, Dennis Michl, Nastaran Khanjari

Prod. Eng., 2007