He Zhang

Orcid: 0000-0002-1184-014X

Affiliations:
  • University of Nottingham Ningbo China, Key Laboratory of More Electric Aircraft Technology of Zhejiang Province, China
  • University of Nottingham, BestMotion Technology Centre, Power Electronics, Machine and Control Group, UK (PhD 2009)


According to our database1, He Zhang authored at least 23 papers between 2015 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Open-Circuit Fault-Tolerant Control for Nonsinusoidal Back EMF Five-Phase PMSM With Copper Loss Reduction.
IEEE Trans. Ind. Electron., 2024

2023
Time-to-Failure Analysis of Short-Duty Cycle, Inverter-Fed Electrical Machines Exposed to Prevailing Electrical Stress.
IEEE Trans. Aerosp. Electron. Syst., December, 2023

Single-Phase Short-Circuit Fault Tolerant Control for Five-Phase Permanent Magnet Machines With Copper Loss Reduction.
IEEE Trans. Ind. Electron., November, 2023

Novel End-Winding Hybrid Flux Machine.
IEEE Access, 2023

Fault Recovery Method for Power Electronic Converters Based on Accelerator-Embedded Digital Twin.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022
Dual-Active-Bridge Converter Modeling for Real-Time Signal Processor Implementation.
Proceedings of the IECON 2022, 2022

Multi-Objective Optimization of the Iron Bridge between Segmeted PMs for an Outer-Rotor Brushless DC Motor.
Proceedings of the IEEE International Conference on Industrial Technology, 2022

2021
An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors.
IEEE Trans. Ind. Electron., 2021

PLL-Based Sensorless Control for Single-Stage Current Source Inverter in Motor Drive Application.
Proceedings of the IECON 2021, 2021

An Advanced Extended Phase Shift Modulation Strategy of Daul Active Bridge Converter Considering Magnetizing Inductance.
Proceedings of the IECON 2021, 2021

2020
A Third-Order Super-Twisting Extended State Observer for Dynamic Performance Enhancement of Sensorless IPMSM Drives.
IEEE Trans. Ind. Electron., 2020

Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings.
IEEE Trans. Ind. Electron., 2020

Torque Ripple Reduction in Sectored Multi Three-Phase Machines Based on PWM Carrier Phase Shift.
IEEE Trans. Ind. Electron., 2020

Experimental Investigation on Oil Spray Cooling With Hairpin Windings.
IEEE Trans. Ind. Electron., 2020

A Novel Concept of Ribless Synchronous Reluctance Motor for Enhanced Torque Capability.
IEEE Trans. Ind. Electron., 2020

2019
Internal Current Return Path for Ground Leakage Current Mitigation in Current Source Inverters.
IEEE Access, 2019

2017
Enhanced Self-Sensing Capability of Permanent-Magnet Synchronous Machines: A Novel Saliency Modulation Rotor End Approach.
IEEE Trans. Ind. Electron., 2017

A semi-flooded cooling for a high speed machine: Concept, design and practice of an oil sleeve.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Multiobjective Optimization of a Magnetically Levitated Planar Motor With Multilayer Windings.
IEEE Trans. Ind. Electron., 2016

Optimal inspection-based preventive maintenance policy for three-state mechanical components under competing failure modes.
Reliab. Eng. Syst. Saf., 2016

Topology investigation on high speed PM generator with back wound windings.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Trade-off analysis and design of a high power density PM machine for flooded industrial pump.
Proceedings of the IECON 2016, 2016

2015
Non-contact arc study for DC power systems.
Proceedings of the IECON 2015, 2015


  Loading...