# Johan J. C. Gyselinck

According to our database

Collaborative distances:

^{1}, Johan J. C. Gyselinck authored at least 12 papers between 2013 and 2019.Collaborative distances:

## Timeline

#### Legend:

Book In proceedings Article PhD thesis Other## Links

#### On csauthors.net:

## Bibliography

2019

A general anomaly detection framework for fleet-based condition monitoring of machines.

CoRR, 2019

Consideration of 3-D end-effects of surface permanent - magnet synchronous-machines through 2-D finite-element analysis.

Proceedings of the IECON 2019, 2019

2018

Vibration-Based Rotor -Side-Converter Open-Switch-Fault Detection in DFIGs for Wind Turbines.

Proceedings of the 2018 IEEE International Conference on Prognostics and Health Management, 2018

Loss minimisation strategy for DFIG in wind turbine considering iron losses.

Proceedings of the IEEE International Conference on Industrial Technology, 2018

Investigation of the influence of open-phase faults on noise and vibrations of switched reluctance machines.

Proceedings of the IEEE International Conference on Industrial Technology, 2018

2017

Optimization of Low-Power Brushless PM-Machines for Automotive Applications With Focus on High-Volume Mass Production.

IEEE Trans. Industrial Electronics, 2017

Solving nonlinear circuits with pulsed excitation by multirate partial differential equations.

CoRR, 2017

Multirate Partial Differential Equations for the Efficient Simulation of Low-Frequency Problems with Pulsed Excitations.

CoRR, 2017

2016

Virtual circuit control for active damping of LCL resonance in grid-connected voltage source converters.

Proceedings of the IECON 2016, 2016

2014

Multiphysics NVH Modeling: Simulation of a Switched Reluctance Motor for an Electric Vehicle.

IEEE Trans. Industrial Electronics, 2014

2013

Three-phase power controlled PV current source inverter with incorporated active power filtering.

Proceedings of the IECON 2013, 2013

LCL Filters for a grid emulator application - Comparative study of active damping techniques.

Proceedings of the IECON 2013, 2013