Kay Hameyer

Affiliations:
  • RWTH Aachen University, Germany


According to our database1, Kay Hameyer authored at least 33 papers between 1995 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Robotergestützte 3D-Laser-Doppler-Vibrometrie zur experimentellen Modalanalyse von elektrischen Maschinen.
Elektrotech. Informationstechnik, April, 2023

2022
Influence of Ambient Conditions on the Qualification Tests of the Interturn Insulation in Low-Voltage Electrical Machines.
IEEE Trans. Ind. Electron., 2022

Die Messung und Berechnung modaler Dämpfungen als Näherungsbeschreibung realer Systeme.
Elektrotech. Informationstechnik, 2022

Strukturdynamische Werkstoffdämpfung von Blechpaketen elektrischer Maschinen.
Elektrotech. Informationstechnik, 2022

2021
Methodik zur Bestimmung von optimalen Messpunkten bei der strukturdynamischen Vermessung elektrischer Maschinen.
Elektrotech. Informationstechnik, 2021

Ladungsträgerbasierte Modellierung von Teilentladungsprozessen in Runddrahtwicklungen umrichtergespeister Niederspannungsmaschinen.
Elektrotech. Informationstechnik, 2021

2020
Transiente Spannungsmodellierung in umrichtergespeisten Niederspannungsmaschinen mit Steckwicklungen.
Elektrotech. Informationstechnik, 2020

Die Kopplung elektrotechnischer und strukturdynamischer Domänen zu einem NVH-Systemmodell eines elektrischen Antriebsstrangs.
Elektrotech. Informationstechnik, 2020

2019
Lebensdauerabschätzung von Wicklungsisolierstoffsystemen in SiC-betriebenen elektrischen Niederspannungsmaschinen.
Elektrotech. Informationstechnik, 2019

Der Einfluss des Schneidens von Elektroblechlamellen und die geeignete numerische Modellierung.
Elektrotech. Informationstechnik, 2019

Modeling of Partial Discharge Processes in Winding Insulation of Low-Voltage Electrical Machines Supplied by High du/dt Inverters.
Proceedings of the IECON 2019, 2019

2018
Lebensdauermodellierung von nicht-teilentladungsresistenten Isoliersystemen elektrischer Maschinen in dynamischen Lastkollektiven.
Elektrotech. Informationstechnik, 2018

Untersuchung der Auswirkungen der Statorsegmentierung auf die Eigenschaften eines elektrischen Kraftfahrzeugtraktionsantriebs.
Elektrotech. Informationstechnik, 2018

Design strategy and simulation of medium-frequency transformers for a three-phase dual active bridge.
Proceedings of the IECON 2018, 2018

2017
Iron-Loss and Magnetic Hysteresis Under Arbitrary Waveforms in NO Electrical Steel: A Comparative Study of Hysteresis Models.
IEEE Trans. Ind. Electron., 2017

Operating Point Resolved Loss Calculation Approach in Saturated Induction Machines.
IEEE Trans. Ind. Electron., 2017

Wind Turbine With Mechanical Power Split Transmission to Reduce the Power Electronic Devices: An Experimental Validation.
IEEE Trans. Ind. Electron., 2017

Einfluss von parasitären Effekten und Fertigungsabweichungen auf die Kräfte in elektrischen Maschinen.
Elektrotech. Informationstechnik, 2017

Entwicklungsmethodik für schnelldrehende, permanentmagneterregte Traktionsmaschinen.
Elektrotech. Informationstechnik, 2017

2016
A Method of Constraint Handling for Speed-Controlled Induction Machines.
IEEE Trans. Ind. Electron., 2016

Transientes Simulationsmodell für die akustische Bewertung elektrischer Antriebe.
Elektrotech. Informationstechnik, 2016

2015
Transientes Simulationsmodell für lokale Kraftanregungen elektrischer Antriebe.
Elektrotech. Informationstechnik, 2015

Robust predictive current control for performance improvement of induction motors with parameter variation.
Proceedings of the IECON 2015, 2015

2014
Modeling of a permanent-magnet excited synchronous machine with bearing damage.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

An adaptive torque controller with MTPA for an IPMSM using model based self-correction.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2012
Simulation based efficiency prediction of a Brushless DC drive applied in Ventricular Assist Devices.
Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2012

2010
Acoustic Simulation of a Special Switched Reluctance Drive by Means of Field-Circuit Coupling and Multiphysics Simulation.
IEEE Trans. Ind. Electron., 2010

Electromagnetic Guiding of Vertical Transportation Vehicles: Experimental Evaluation.
IEEE Trans. Ind. Electron., 2010

MATLAB Meets LEGO Mindstorms - A Freshman Introduction Course Into Practical Engineering.
IEEE Trans. Educ., 2010

2007
Body-Sound Analysis of a Power-Steering Drive Considering Manufacturing Faults.
IEEE Trans. Veh. Technol., 2007

1996
Permanent magnet excited brushed DC motors.
IEEE Trans. Ind. Electron., 1996

Methods and Tools for the Design of Electrostatic Micromotors.
Proceedings of the 1996 European Design and Test Conference, 1996

1995
Combining Circuit Theory and Numerical Field Calculations in Designing Mini-Mechatronic Systems.
Proceedings of the 1995 IEEE International Symposium on Circuits and Systems, ISCAS 1995, Seattle, Washington, USA, April 30, 1995


  Loading...