Keita Shimada

According to our database1, Keita Shimada authored at least 21 papers between 2011 and 2021.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2021
Effect of Ultrafine Bubbles on <i>Pseudomonas Aeruginosa</i> and <i>Staphylococcus Aureus</i> During Sterilization of Machining Fluid.
Int. J. Autom. Technol., 2021

2020
Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser.
Int. J. Autom. Technol., 2020

Ultrasonic-Assisted Face Milling for Fabricating Hierarchical Microstructures.
Int. J. Autom. Technol., 2020

Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures.
Int. J. Autom. Technol., 2020

Porosity and Tensile Properties of Rhizoid Porous Structure Fabricated Using Selective Laser Melting.
Int. J. Autom. Technol., 2020

2019
Unidirectional Wetting Surfaces Fabricated by Ultrasonic-Assisted Cutting.
Int. J. Autom. Technol., 2019

2018
CFD Analysis of Friction-Reduction Effect of Micro-Textured Surfaces in Lubricant.
Int. J. Autom. Technol., 2018

Friction Reduction by Micro-Textured Surfaces in Lubrication.
Int. J. Autom. Technol., 2018

Effect of Crystal Structure on Fabrication of Fine Periodic Surface Structures with Short Pulsed Laser.
Int. J. Autom. Technol., 2018

2016
Minimizing Burrs and Defects on Microstructures with Laser Assisted Micromachining Technology.
Int. J. Autom. Technol., 2016

Influence of Workpiece Materials on the Characteristics of the Layers by Electrical Discharge Coating.
Int. J. Autom. Technol., 2016

Fabrication and Control of Fine Periodic Surface Structures by Short Pulsed Laser.
Int. J. Autom. Technol., 2016

2015
Fabrication of Precision Micrograting on Resin Substrate Utilizing Ultrasonic-Assisted Molding.
Int. J. Autom. Technol., 2015

2014
Using Smoothed Particle Hydrodynamics to Examine Influence of Process Parameters on Ultrasonic Machining.
Int. J. Autom. Technol., 2014

Statistical Analysis for Evaluating Surface Roughness of Plane Honing.
Int. J. Autom. Technol., 2014

2013
Material Removal During Ultrasonic Machining Using Smoothed Particle Hydrodynamics.
Int. J. Autom. Technol., 2013

Characteristics of Thick Film Deposition in Powder Jet Machining.
Int. J. Autom. Technol., 2013

Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining.
Int. J. Autom. Technol., 2013

Ultraprecision Glass Molding Press for Microgrooves with Different Pitch Sizes.
Int. J. Autom. Technol., 2013

Development of an Ultrasonically-Assisted Electrolytic Grinding System.
Int. J. Autom. Technol., 2013

2011
Ultrasonic-Assisted Grinding of Ultra-High Purity SUS 316L.
Int. J. Autom. Technol., 2011


  Loading...