Tsunemoto Kuriyagawa

According to our database, Tsunemoto Kuriyagawa authored at least 28 papers between 2006 and 2023.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2023

Influence of the Impact Angle on Machining in Powder Jet Processing.

Chieko Kuji, Kuniyuki Izumita, Keita Shimada, Masayoshi Mizutani, Keiichi Sasaki, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., January, 2023

2021

Effect of Ultrafine Bubbles on <i>Pseudomonas Aeruginosa</i> and <i>Staphylococcus Aureus</i> During Sterilization of Machining Fluid.

Hiroko Yamada, Kensuke Konishi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2021

2020

Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser.

Ryohei Takase, Shuhei Kodama, Keita Shimada, Holger Mescheder, Kai Winands, Jan Riepe, Kristian Arntz, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2020

Ultrasonic-Assisted Face Milling for Fabricating Hierarchical Microstructures.

Keita Shimada, Ziqi Chen, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2020

Editorial: Laser-Based/Assisted Manufacturing.

Tsunemoto Kuriyagawa, Masayoshi Mizutani

Int. J. Autom. Technol., 2020

Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures.

Shuhei Kodama, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2020

Porosity and Tensile Properties of Rhizoid Porous Structure Fabricated Using Selective Laser Melting.

Shinji Ishibashi, Keita Shimada, Hiroyasu Kanetaka, Masaki Tsukuda, Takumi Mizoi, Masataka Chuzenji, Shoichi Kikuchi, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2020

2019

Unidirectional Wetting Surfaces Fabricated by Ultrasonic-Assisted Cutting.

Keita Shimada, Takuya Hirai, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2019

2018

CFD Analysis of Friction-Reduction Effect of Micro-Textured Surfaces in Lubricant.

Yue Sun, Shaolin Xu, Tomoki Kyoizumi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2018

Friction Reduction by Micro-Textured Surfaces in Lubrication.

Yue Sun, Keita Shimada, Shaolin Xu, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2018

Effect of Crystal Structure on Fabrication of Fine Periodic Surface Structures with Short Pulsed Laser.

Shuhei Kodama, Shinya Suzuki, Akihiro Shibata, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2018

2017

Editorial: Biomedical Applications.

Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2017

2016

Minimizing Burrs and Defects on Microstructures with Laser Assisted Micromachining Technology.

Shaolin Xu, Shinsaku Osawa, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2016

Influence of Workpiece Materials on the Characteristics of the Layers by Electrical Discharge Coating.

Nobuyuki Sumi, Chihiro Kato, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2016

Fabrication and Control of Fine Periodic Surface Structures by Short Pulsed Laser.

Shuhei Kodama, Akihiro Shibata, Shinya Suzuki, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2016

2015

Fabrication of Precision Micrograting on Resin Substrate Utilizing Ultrasonic-Assisted Molding.

Sergey Bolotov, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2015

2014

Using Smoothed Particle Hydrodynamics to Examine Influence of Process Parameters on Ultrasonic Machining.

Jingsi Wang, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2014

Statistical Analysis for Evaluating Surface Roughness of Plane Honing.

Keita Shimada, Chung-I Kuo, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2014

2013

Material Removal During Ultrasonic Machining Using Smoothed Particle Hydrodynamics.

Jingsi Wang, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2013

Characteristics of Thick Film Deposition in Powder Jet Machining.

Chihiro Nishikawa, Naohide Mizukuchi, Akihiko Tomie, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2013

Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining.

Pay Jun Liew, Keita Shimada, Masayoshi Mizutani, Jiwang Yan, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2013

Ultraprecision Glass Molding Press for Microgrooves with Different Pitch Sizes.

Ryuichi Kobayashi, Tianfeng Zhou, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2013

Development of an Ultrasonically-Assisted Electrolytic Grinding System.

Satoshi Kobayashi, Keita Shimada, Chikashi Murakoshi, Kazunori Koike, Masayuki Takahashi, Toru Tachibana, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2013

Development of Non-Destructive Technology for Detecting Grinding Burns.

Takayuki Azuma, Ryo Ito, Shinji Soma, Shinji Murakami, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2013

2011

Effect of Nanoparticle Lubrication in Diamond Turning of Reaction-Bonded SiC.

Jiwang Yan, Zhiyu Zhang, Tsunemoto Kuriyagawa

Int. J. Autom. Technol., 2011

Ultrasonic-Assisted Grinding of Ultra-High Purity SUS 316L.

Keita Shimada, Nobuhito Yoshihara, Jiwang Yan, Tsunemoto Kuriyagawa, Yuichiro Sueishi, Hideshi Tezuka

Int. J. Autom. Technol., 2011

2006

Nano-topography on axisymmetric aspherical ground surfaces.

Nobuhito Yoshihara, Tsunemoto Kuriyagawa, Hiromichi Ono, Katsuo Syoji

Int. J. Manuf. Technol. Manag., 2006

Electrorheological fluid-assisted polishing of WC micro aspherical glass moulding dies.

Tsuyoshi Kaku, Tsunemoto Kuriyagawa, Nobuhito Yoshihara

Int. J. Manuf. Technol. Manag., 2006