Kristian Sandström

According to our database, Kristian Sandström authored at least 41 papers between 1996 and 2021.

Collaborative distances:

• Dijkstra number of three.
• Erdős number of four.

2021

Challenges in providing sustainable analytic of system of systems with long life time.

Daniel Hallmans, Kristian Sandström, Stig Larsson, Thomas Nolte

Proceedings of the 16th International Conference of System of Systems Engineering, 2021

Design considerations introducing analytics as a "dual use" in complex industrial embedded systems.

Daniel Hallmans, Kristian Sandström, Stig Larsson, Niclas Ericsson, Thomas Nolte

Proceedings of the 26th IEEE International Conference on Emerging Technologies and Factory Automation, 2021

2019

Industrial IoT with Distributed Cloud Experiments using 5G LTE.

Luka Lednicki, Gargi Bag, Krister Landernäs, Niclas Ericsson, Larisa Rizvanovic, Kristian Sandström, Johan Torsner, Calin Curescu, Björn Skubic

Proceedings of the 15th IEEE International Workshop on Factory Communication Systems, 2019

Analyzing availability and QoS of service-oriented cloud for industrial IoT applications.

Jawad Mustafa, Kristian Sandström, Niclas Ericsson, Larisa Rizvanovic

Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019

2018

A resource efficient framework to run automotive embedded software on multi-core ECUs.

Hamid Reza Faragardi, Björn Lisper, Kristian Sandström, Thomas Nolte

J. Syst. Softw., 2018

2017

Delay Mitigation in Offloaded Cloud Controllers in Industrial IoT.

Saad Mubeen, Pavlos Nikolaidis, Alma Didic, Hongyu Pei Breivold, Kristian Sandström, Moris Behnam

IEEE Access, 2017

2016

Towards a compositional service architecture for real-time cloud robotics: invited paper.

Shahina Begum, Moris Behnam, Thomas Larsson, Thomas Nolte, Kristian Sandström

SIGBED Rev., 2016

On providing real-time guarantees in cloud-based platforms.

Meng Liu, Cezar Chiru, Moris Behnam, Kristian Sandström, Thomas Nolte

Proceedings of the IEEE World Conference on Factory Communication Systems, 2016

Consistent sensor values on a real-time ethernet network.

Daniel Hallmans, Kristian Sandström, Thomas Nolte, Stig Larsson

Proceedings of the IEEE World Conference on Factory Communication Systems, 2016

EAICA: An energy-aware resource provisioning algorithm for Real-Time Cloud services.

Hamid Reza Faragardi, Aboozar Rajabi, Kristian Sandström, Thomas Nolte

Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

2015

Challenges and opportunities when introducing cloud computing into embedded systems.

Daniel Hallmans, Kristian Sandström, Thomas Nolte, Stig Larsson

Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015

A method and industrial case: Replacement of an FPGA component in a legacy control system.

Daniel Hallmans, Kristian Sandström, Thomas Nolte, Stig Larsson

Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015

A many-core based execution framework for IEC 61131-3.

Matthias Becker, Kristian Sandström, Moris Behnam, Thomas Nolte

Proceedings of the IECON 2015, 2015

Internet of Things for Industrial Automation - Challenges and Technical Solutions.

Hongyu Pei Breivold, Kristian Sandström

Proceedings of the IEEE International Conference on Data Science and Data Intensive Systems, 2015

2014

Dynamic power management for thermal control of many-core real-time systems.

Matthias Becker, Kristian Sandström, Moris Behnam, Thomas Nolte

SIGBED Rev., 2014

Evaluating industrial applicability of virtualization on a distributed multicore platform.

Nesredin Mahmud, Kristian Sandström, Aneta Vulgarakis

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

Applicability of using internal GPGPUs in industrial control systems.

Markus Lindgren, Kristian Sandström, Thomas Nolte, Daniel Hallmans

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

A communication-aware solution framework for mapping AUTOSAR runnables on multi-core systems.

Hamid Reza Faragardi, Björn Lisper, Kristian Sandström, Thomas Nolte

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

Virtualize for test environment in industrial automation.

Hongyu Pei Breivold, Kristian Sandström

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

Limiting temperature gradients on many-cores by adaptive reallocation of real-time workloads.

Matthias Becker, Kristian Sandström, Moris Behnam, Thomas Nolte

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

2013

Virtualization technologies in embedded real-time systems.

Kristian Sandström, Aneta Vulgarakis, Markus Lindgren, Thomas Nolte

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

Device utilization analysis for IEC 61499 systems in early stages of development.

Luka Lednicki, Jan Carlson, Kristian Sandström

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

GPGPU for industrial control systems.

Daniel Hallmans, Kristian Sandström, Markus Lindgren, Thomas Nolte

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

Virtualize for Architecture Sustainability in Industrial Automation.

Hongyu Pei Breivold, Anton Jansen, Kristian Sandström, Ivica Crnkovic

Proceedings of the 16th IEEE International Conference on Computational Science and Engineering, 2013

Model level worst-case execution time analysis for IEC 61499.

Luka Lednicki, Jan Carlson, Kristian Sandström

Proceedings of the CBSE'13, 2013

2012

Data Distribution Service for industrial automation.

Jinsong Yang, Kristian Sandström, Thomas Nolte, Moris Behnam

Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

On jitter in time partitioned real-time systems.

Kristian Sandström, Thomas Nolte, Moris Behnam, Reinder J. Bril

Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

2008

Introducing Component Based Software Engineering at an Embedded Systems Sub-Contractor.

Mikael Åkerholm, Kristian Sandström, Ivica Crnkovic

Proceedings of the 34th Euromicro Conference on Software Engineering and Advanced Applications, 2008

2007

Key factors for achieving project success in integration of automotive mechatronics.

Joakim Fröberg, Mikael Åkerholm, Kristian Sandström, Christer Norström

Innov. Syst. Softw. Eng., 2007

2005

Business situation reflected in automotive electronic architectures: analysis of four commercial cases.

Joakim Fröberg, Kristian Sandström, Christer Norström

ACM SIGSOFT Softw. Eng. Notes, 2005

Optimizing Resource Usage in Component-Based Real-Time Systems.

Johan Fredriksson, Kristian Sandström, Mikael Åkerholm

Proceedings of the Component-Based Software Engineering, 8th International Symposium, 2005

A Comparative Case Study of Distributed Network Architectures for Different Automotive Applications.

Jakob Axelsson, Joakim Fröberg, Hans Hansson, Christer Norström, Kristian Sandström, Björn Villing

Proceedings of the Industrial Information Technology Handbook, 2005

2004

Real World Influences on Software Architecture - Interviews with Industrial System Experts.

Goran Mustapic, Anders Wall, Christer Norström, Ivica Crnkovic, Kristian Sandström, Joakim Fröberg, Johan Andersson

Proceedings of the 4th Working IEEE / IFIP Conference on Software Architecture (WICSA 2004), 2004

Introducing a Component Technology for Safety Critical Embedded Real-Time Systems.

Kristian Sandström, Johan Fredriksson, Mikael Åkerholm

Proceedings of the Component-Based Software Engineering, 7th International Symposium, 2004

2003

Attaining Flexible Real-Time Systems by Bringing Together Component Technologies and Real-Time Systems Theory.

Johan Fredriksson, Mikael Åkerholm, Kristian Sandström, Radu Dobrin

Proceedings of the 29th EUROMICRO Conference 2003, 2003

2002

Managing Complex Temporal Requirements in Real-Time Control Systems.

Kristian Sandström, Christer Norström

Proceedings of the 9th IEEE International Conference on Engineering of Computer-Based Systems (ECBS 2002), 2002

2001

Experiences from Introducing State-of-the-Art Real-Time Techniques in the Automotive Industry.

Christer Norström, Kristian Sandström, Jukka Mäki-Turja, Mikael Gustafsson, Nils-Erik Bånkesta

Proceedings of the 8th IEEE International Conference on Engineering of Computer-Based Systems (ECBS 2001), 2001

2000

Verifying temporal constraints on data in multi-rate transactions using timed automata.

Anders Wall, Kristian Sandström, Jukka Mäki-Turja, Christer Norström, Wang Yi

Proceedings of the 7th International Workshop on Real-Time Computing and Applications Symposium (RTCSA 2000), 2000

Frame packing in real-time communication.

Kristian Sandström, Christer Norström, Magnus Ahlmark

Proceedings of the 7th International Workshop on Real-Time Computing and Applications Symposium (RTCSA 2000), 2000

1998

Handling Interrupts with Static Scheduling in an Automotive Vehicle Control System.

Kristian Sandström, Christer Eriksson, Gerhard Fohler

Proceedings of the 5th International Workshop on Real-Time Computing Systems and Applications (RTCSA '98), 1998

1996

An Overview of RealTimeTalk, a Design Framework for Real-Time Systems.

Christer Eriksson, Jukka Mäki-Turja, Kjell Post, Mikael Gustafsson, Jan Gustafsson, Kristian Sandström, Ellus Brorsson

J. Parallel Distributed Comput., 1996