Nassim Rizoug

Orcid: 0000-0002-2151-185X

According to our database1, Nassim Rizoug authored at least 42 papers between 2010 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Generating Fault Databases Through Simulated and Experimental Multi-Rotor UAV Propulsion Systems.
IEEE Trans. Veh. Technol., April, 2024

2023
Energy management strategies for a fuel-cell/battery hybrid power system.
J. Syst. Control. Eng., April, 2023

A Temporal Convolution Network to Electric vehicle Battery State-of-Charge Estimation.
Proceedings of the 9th International Conference on Control, 2023

Estimation of Power Consumption for Multirotor Unmanned Aerial Vehicles Via a Multiphysical Model.
Proceedings of the 9th International Conference on Control, 2023

Adaptive Intelligent Control of 2-DOF Helicopter System.
Proceedings of the 9th International Conference on Control, 2023

State of Health Prediction of Lithium-Ion Battery Using Machine Learning Algorithms.
Proceedings of the 9th International Conference on Control, 2023

IPM Machine Design Using K-Means Data Clustering Technique for Automotive Applications.
Proceedings of the 9th International Conference on Control, 2023

An Improvement Control Strategy of Stand-Alone PV, Wind, and Battery System.
Proceedings of the 20th International Multi-Conference on Systems, Signals & Devices, 2023

2022
The influence of driving cycle characteristics on motor optimisation for electric vehicles.
Proceedings of the 30th Mediterranean Conference on Control and Automation, 2022

Power management strategies of hybrid storage system suppling electric vehicle.
Proceedings of the 30th Mediterranean Conference on Control and Automation, 2022

The influence of the battery technology choice on motor optimisation for electric vehicles.
Proceedings of the 8th International Conference on Control, 2022

Prediction of aging electric vehicle battery by multi-physics modeling and deep learning method.
Proceedings of the 8th International Conference on Control, 2022

Upper Limb Exoskeleton Robot Control Using Input Output Switching.
Proceedings of the 8th International Conference on Control, 2022

Design of Hybrid Energy Source for automative applications.
Proceedings of the 8th International Conference on Control, 2022

The Influence of Magnetic Materials Technologies on the Design of IPMSM for Automotive Applications.
Proceedings of the 8th International Conference on Control, 2022

Energy management strategy based on fuzzy logic for electric vehicle with hybrid source.
Proceedings of the 19th International Multi-Conference on Systems, Signals & Devices, 2022

2021
Advanced Model of Hybrid Energy Storage System Integrating Lithium-Ion Battery and Supercapacitor for Electric Vehicle Applications.
IEEE Trans. Ind. Electron., 2021

2020
Energy-Efficiency Path Planning for Quadrotor UAV Under Wind Conditions.
CoRR, 2020

Energy-Efficiency Path Planning for Quadrotor UAV Under Wind Conditions.
Proceedings of the 7th International Conference on Control, 2020

Optimization of Li-ion modelling for automotive application: comparison of optimization methods performances.
Proceedings of the 7th International Conference on Control, 2020

Balancing of State Of Charge Batteries in a Three Phase Diode Clamped Inverter Controlled By a Direct Space Vector of Line to Line Voltages.
Proceedings of the 7th International Conference on Control, 2020

Novel Hybrid Intelligent Backstepping Controller for Chaotic Systems.
Proceedings of the 7th International Conference on Control, 2020

Improved Fuzzy Logic Control of PV/Battery Hybrid Power System.
Proceedings of the 7th International Conference on Control, 2020

2019
Sizing improvement of hybrid storage system composed with high energy and high power Li-ion batteries for automotive applications.
J. Syst. Control. Eng., 2019

Robust Intelligent Self-tuning PID Controller for the Body-rate Stabilization of Quadrotors.
Proceedings of the IECON 2019, 2019

Thermal Impact on Powertrain Efficiency Improvement for Two Wheels Electric Vehicle.
Proceedings of the IECON 2019, 2019

Battery sizing impact on aging of high capacity LFP/C cell for electrical-Light Commercial Vehicle.
Proceedings of the IECON 2019, 2019

Using of multi-physical models to evaluate the Influence of power management strategies on the ageing of hybrid energy storage system.
Proceedings of the 6th International Conference on Control, 2019

Two wheels electric vehicle modelling: Parameters sensitivity analysis.
Proceedings of the 6th International Conference on Control, 2019

2018
Dynamic Model of Li-Ion Batteries Incorporating Electrothermal and Ageing Aspects for Electric Vehicle Applications.
IEEE Trans. Ind. Electron., 2018

Extended State Observer-Based Adaptive Fuzzy Tracking Control for a Quadrotor UAV.
Proceedings of the 5th International Conference on Control, 2018

Energy Secondary Source Technology Effect on Hybrid Energy Source Sizing for Automotive Applications.
Proceedings of the 5th International Conference on Control, 2018

2017
Optimal Energy Management for a Li-Ion Battery/Supercapacitor Hybrid Energy Storage System Based on a Particle Swarm Optimization Incorporating Nelder-Mead Simplex Approach.
IEEE Trans. Intell. Veh., 2017

Trajectory optimisation for a quadrotor helicopter considering energy consumption.
Proceedings of the 4th International Conference on Control, 2017

Comparative study between battery and supercapacitor hybridization with fuel cells for automotive applications.
Proceedings of the 4th International Conference on Control, 2017

Experimental energy management of hybrid fuel cell/battery system.
Proceedings of the 14th International Multi-Conference on Systems, 2017

2016
Observer-based Adaptive Fuzzy Backstepping Tracking Control of Quadrotor Unmanned Aerial Vehicle Powered by Li-ion Battery.
J. Intell. Robotic Syst., 2016

Sizing and Energy Management Strategy for hybrid FC/Battery electric vehicle.
Proceedings of the IECON 2016, 2016

2015
New state observer based on Takagi-Sugeno fuzzy controller of induction motor.
Proceedings of the 4th International Conference on Systems and Control, 2015

2014
Adaptive neural network control based on neural observer for quadrotor unmanned aerial vehicle.
Adv. Robotics, 2014

2013
A Control Reconfiguration Strategy for Post-Sensor FTC in Induction Motor-Based EVs.
IEEE Trans. Veh. Technol., 2013

2010
Modeling and Characterizing Supercapacitors Using an Online Method.
IEEE Trans. Ind. Electron., 2010


  Loading...