Nicola Paone

According to our database, Nicola Paone authored at least 19 papers between 2012 and 2023.

Collaborative distances:

• Dijkstra number of four.
• Erdős number of four.

2023

Design and Metrological Analysis of a Backlit Vision System for Surface Roughness Measurements of Turned Parts.

Alessia Baleani, Nicola Paone, Jona Gladines, Steve Vanlanduit

Sensors, February, 2023

Beam Straightness Measurement with Laser Triangulation System: a steel industry use case.

Valentina Pasquinelli, Milena Martarelli, Nicola Paone, Paolo Castellini, Luigi Montalto, Kosmas Alexopoulos, Nikolaos Nikolakis, Wilhelm van de Kamp, Bart Verhoef

Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Integration of Non-Destructive Inspection (NDI) systems for Zero-Defect Manufacturing in the Industry 4.0 era.

Vittoria Medici, Milena Martarelli, Nicola Paone, Giuseppe Pandarese, Wilhelm van de Kamp, Bart Verhoef, Konstantinos Sipsas, Raimund Broechler, Lara Barja Besada, Kosmas Alexopoulos, Nikolaos Nikolakis

Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

A robot-based inspecting system for 3D measurement.

Silvia Discepolo, Milena Martarelli, Nicola Paone, Paolo Castellini, Wilhelm van de Kamp, Bart Verhoef, Nikolaos Nikolakis, Kosmas Alexopoulos

Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

2022

Surface roughness measurements of turned parts through a vision-based measurement system: uncertainty analysis and performance comparison with state-of-the-art instruments.

Alessia Baleani, Nicola Paone, Jona Gladines, Steve Vanlanduit

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Integrating Standardization in Research and Innovation Projects: the GO0DMAN Experience.

Paulo Leitão, Cristina Cristalli, Nicola Paone, Paolo Chiariotti, Wilfrid Utz, Nenad Stojanovic, José Barata, Robert Woitsch

Proceedings of the 31st IEEE International Symposium on Industrial Electronics, 2022

2021

R&D evaluation methodology based on group-AHP with uncertainty.

Alberto Garinei, Emanuele Piccioni, Massimiliano Proietti, Andrea Marini, Stefano Speziali, Marcello Marconi, Raffaella Di Sante, Sara Casaccia, Paolo Castellini, Milena Martarelli, Nicola Paone, Gian Marco Revel, Lorenzo Scalise, Marco Arnesano, Paolo Chiariotti, Roberto Montanini, Antonino Quattrocchi, Sergio Silvestri, Giorgio Ficco, Emanuele Rizzuto, Andrea Scorza, Matteo Lancini, Gianluca Rossi, Roberto Marsili, Emanuele Zappa, Salvatore Andrea Sciuto

CoRR, 2021

Dimensional measurements in production line: a comparison between a custom-made telecentric optical profilometer and on-the-market measurement systems.

Alessia Baleani, Paolo Castellini, Paolo Chiariotti, Nicola Paone, Daniele Roccetti, Lorenzo Zampetti, Marco Zannini, Saverio Zitti

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

2020

A Smartphone Integrated Hand-Held Gap and Flush Measurement System for in Line Quality Control of Car Body Assembly.

Elisa Minnetti, Paolo Chiariotti, Nicola Paone, Gisela García, Helder Vicente, Luca Violini, Paolo Castellini

Sensors, 2020

Analysis of reproducibility and repeatability of a hand-held laser scanner for gap&flush measurement in car-assembly line.

Alessia Baleani, Paolo Castellini, Paolo Chiariotti, Nicola Paone, Luca Violini

Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

2019

Smart portable laser triangulation system for assessing gap and flush in car body assembly line.

Elisa Minnetti, Paolo Chiariotti, Paolo Castellini, Luca Violini, Gisela García, Helder Vicente, Nicola Paone

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

In-Line Burr Inspection Through Backlight Vision.

Matteo Fitti, Paolo Castellini, Nicola Paone, Marco Zannini, Saverio Zitti, Marco Gambini, Paolo Chiariotti

Proceedings of the New Trends in Image Analysis and Processing - ICIAP 2019, 2019

2018

Smart quality control station for non-contact measurement of cylindrical parts based on a confocal chromatic sensor.

Paolo Chiariotti, Matteo Fitti, Paolo Castellini, Saverio Zitti, Marco Zannini, Nicola Paone

IEEE Instrum. Meas. Mag., 2018

High-Accuracy Dimensional Measurement of Cylindrical Components by an Automated Test Station Based on Confocal Chromatic Sensor.

Paolo Chiariotti, Matteo Fitti, Paolo Castellini, Saverio Zitti, Marco Zannini, Nicola Paone

Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Smart measurement systems for Zero-Defect Manufacturing.

Paolo Chiariotti, Paolo Castellini, Enrico Concettoni, Matteo Fitti, Giulia Lo Duca, Elisa Minnetti, Nicola Paone, Cristina Cristalli

Proceedings of the 16th IEEE International Conference on Industrial Informatics, 2018

2017

Optimization of the photoelastic fringe pattern processing for the stress evaluation in scintillating anisotropic media.

Pier Paolo Natali, Luigi Montalto, Fabrizio Davi, Nicola Paone, Daniele Rinaldi, Lorenzo Scalise

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2013

Integration of process and quality control using multi-agent technology.

Cristina Cristalli, Matthias Foehr, Tobias Jäger, Paulo Leitão, Nicola Paone, Paolo Castellini, Claudio Turrin, Ingrid Schjølberg

Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013

2012

Quality control agents for adaptive visual inspection in production lines.

Lorenzo Stroppa, Nelson Rodrigues, Paulo Leitão, Nicola Paone

Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Self-adapting test-plans in production line: An application to vision control stations.

Alessandro Bastari, Matteo Piersantelli, Cristina Cristalli, Nicola Paone

Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012