Sebastian Y. C. Catunda

Orcid: 0000-0002-9599-9552

According to our database1, Sebastian Y. C. Catunda authored at least 48 papers between 1999 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
I&M Around the World: Highlighting IEEE Region 9.
IEEE Instrum. Meas. Mag., April, 2024

2022
Architecture of an Electrical Equivalence Pyranometer with Temperature Difference Analog Control.
Sensors, 2022

Oxygen Uptake Rate Measurement Using Sigma Delta Modulator in the Biological Domain in Activated Sludge Systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Modeling a Virtual Flow Sensor in a Sugar-Energy Plant using Artificial Neural Network.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021
Adaptive Pressure Control System Based on the Maximum Correntropy Criterion.
Sensors, 2021

Indirect Feedback Measurement of Flow in a Water Pumping Network Employing Artificial Intelligence.
Sensors, 2021

2020
An Online Remote Verification System of Thermal Sources for Energy Harvesting Application.
IEEE Trans. Instrum. Meas., 2020

2019
Autorange Thermal Sigma-Delta Converter for Incident Radiation Measurement.
IEEE Trans. Instrum. Meas., 2019

Oxygen Uptake Rate Measurement Using Kalman Filter and PWM Control in Activated Sludge Systems.
IEEE Trans. Instrum. Meas., 2019

Impact of high-order CoI filters on the output signal noise of incremental converters.
Microelectron. J., 2019

KAUSTat: A Wireless, Wearable, Open-Source Potentiostat for Electrochemical Measurements.
Proceedings of the 2019 IEEE SENSORS, Montreal, QC, Canada, October 27-30, 2019, 2019

State of Charge Estimation for Li-Ion Batteries Based on Recurrent NARX Neural Network with Temperature Effect.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Fuzzy Pressure Control System in Water Supply Networks with Series-Parallel Pumps.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

An Automatic Emulation System for Environmental Thermal Energy Harvesting.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Evaluation of the Performance of a Wireless Mesh Network Built with Sub-GHz Transceivers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
Special Issue on the 2017 IEEE International Instrumentation and Measurement Technology Conference.
IEEE Trans. Instrum. Meas., 2018

2017
4th order capacitively-coupled LC-based ΣΔ modulator.
Microelectron. J., 2017

Electronic instrumentation for the characterization of a rotary thermoelectric motor driven by shape memory alloy springs.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Non-uniform sampling based ADC architecture using an adaptive level-crossing technique.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Lead acid battery SoC estimation based on extended Kalman Filter method considering different temperature conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Development and characterization of an electric power generator using piezoelectric (PZT) subjected to base excitation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Study of the stability of the NiTi wire applied to thermomechanical actuators.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
A 70.4 dB voltage gain, 2.3 dB NF, fully integrated multi-standard UHF receiver front-end in CMOS 130-nm.
Microelectron. J., 2016

Requirements for an integrated conditioning circuit for multiphase flow imaging using impedance wire-mesh sensors.
Proceedings of the IEEE 7th Latin American Symposium on Circuits & Systems, 2016

Analysis of a radio physical layer fault in WirelessHART networks.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

Disturbance observer for estimation of oxygen uptake rate in an activated sludge reactor.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
Analysis and System-Level Design of a High Resolution Incremental ΣΔ ADC for Biomedical Applications.
Proceedings of the 28th Symposium on Integrated Circuits and Systems Design, 2015

SystemC AMS modeling of a sensor node energy consumption and battery state-of-charge for WSN.
Proceedings of the IEEE 13th International New Circuits and Systems Conference, 2015

SPICE-based dynamical model of a NTC thermoresistive sensor for anemometer applications.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Architectural specification for infusion pumps and realization towards safety technological trends.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Specifications for a multi-standard SBCD/ARGOS-3 integrated UHF satellite receiver.
Proceedings of the IEEE 5th Latin American Symposium on Circuits and Systems, 2014

Design of RF BAW-based ΣΔ Modulators.
Proceedings of the IEEE 5th Latin American Symposium on Circuits and Systems, 2014

Ultrasonic time-of-flight estimation based on maximum likelihood data fusion using triangular distribution.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Flexible A/D converter architecture targeting sparse signals.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Switched-capacitor pulse-width programmable gain integrating amplifier.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

A controlled-temperature hot-wire anemometer with voltage feedback linearization.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Wind speed measurement based on time-of-flight estimation using Extended Kalman Filter.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Pulse-width programmable gain integrating amplifier.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Uncertainty analysis of a superregenerative pulse-width programmable gain amplifier.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

8-bit folding ADC based on switched capacitor.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Wind speed measurement based on ultrasonic sensors using Discrete Fourier Transform.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2009
Maximum-Likelihood Data Fusion of Phase-Difference and Threshold-Detection Techniques for Wind-Speed Measurement.
IEEE Trans. Instrum. Meas., 2009

Applications of Thermoresistive Sensors Using the Electric Equivalence Principle.
IEEE Trans. Instrum. Meas., 2009

A Q-enhanced LC bandpass filter using CAIRO+.
Proceedings of the 16th IEEE International Conference on Electronics, 2009

2007
DC-Amplifier-Input-Offset-Voltage Control in a Constant-Temperature Thermoresistive-Sensor-Measurement Instrument.
IEEE Trans. Instrum. Meas., 2007

2005
A-to-D converter and lookup table dimensioning for six- or five-port phase discriminators.
IEEE Trans. Instrum. Meas., 2005

2003
Designing a programmable analog signal conditioning circuit without loss of measurement range.
IEEE Trans. Instrum. Meas., 2003

1999
Feedback control method for estimating the oxygen uptake rate in activated sludge systems.
IEEE Trans. Instrum. Meas., 1999


  Loading...