Tianyu Zhang

According to our database, Tianyu Zhang authored at least 15 papers between 2020 and 2026.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2026

Force-based adaptive deposition in multi-axis additive manufacturing: Low porosity for enhanced strength.

Yuming Huang, Renbo Su, Kun Qian, Tianyu Zhang, Yongxue Chen, Tao Liu, Guoxin Fang, Weiming Wang, Charlie C. L. Wang

Robotics Comput. Integr. Manuf., 2026

Implicit neural field-based process planning for multi-axis manufacturing: Direct control over collision avoidance and toolpath geometry.

Neelotpal Dutta, Tianyu Zhang, Tao Liu, Yongxue Chen, Charlie C. L. Wang

Comput. Aided Des., 2026

2025

Can Any Model Be Fabricated? Inverse Operation Based Planning for Hybrid Additive-Subtractive Manufacturing.

Yongxue Chen, Tao Liu, Yuming Huang, Weiming Wang, Tianyu Zhang, Kun Qian, Zikang Shi, Charlie C. L. Wang

ACM Trans. Graph., December, 2025

Neural Co-Optimization of Structural Topology, Manufacturable Layers, and Path Orientations for Fiber-Reinforced Composites.

Tao Liu, Tianyu Zhang, Yongxue Chen, Weiming Wang, Yu Jiang, Yuming Huang, Charlie C. L. Wang

ACM Trans. Graph., August, 2025

Co-Optimization of Tool Orientations, Kinematic Redundancy, and Waypoint Timing for Robot-Assisted Manufacturing.

Yongxue Chen, Tianyu Zhang, Yuming Huang, Tao Liu, Charlie C. L. Wang

IEEE Trans Autom. Sci. Eng., 2025

2024

Learning Based Toolpath Planner on Diverse Graphs for 3D Printing.

Yuming Huang, Yuhu Guo, Renbo Su, Xingjian Han, Junhao Ding, Tianyu Zhang, Tao Liu, Weiming Wang, Guoxin Fang, Xu Song, Emily Whiting, Charlie Wang

ACM Trans. Graph., December, 2024

Neural Slicer for Multi-Axis 3D Printing.

Tao Liu, Tianyu Zhang, Yongxue Chen, Yuming Huang, Charlie C. L. Wang

ACM Trans. Graph., July, 2024

Vector Field-Based Volume Peeling for Multi-Axis Machining.

Neelotpal Dutta, Tianyu Zhang, Guoxin Fang, Ismail E. Yigit, Charlie C. L. Wang

J. Comput. Inf. Sci. Eng., May, 2024

Toolpath Generation for High Density Spatial Fiber Printing Guided by Principal Stresses.

Tianyu Zhang, Tao Liu, Neelotpal Dutta, Yongxue Chen, Renbo Su, Zhizhou Zhang, Weiming Wang, Charlie C. L. Wang

CoRR, 2024

Concurrent and Scalable Trajectory Optimization for Manufacturing with Redundant Robots.

Yongxue Chen, Tianyu Zhang, Yuming Huang, Tao Liu, Charlie C. L. Wang

CoRR, 2024

2023

Exceptional Mechanical Performance by Spatial Printing with Continuous Fiber.

Guoxin Fang, Tianyu Zhang, Yuming Huang, Zhizhou Zhang, Kunal Masania, Charlie C. L. Wang

CoRR, 2023

Support Generation for Robot-Assisted 3D Printing with Curved Layers.

Tianyu Zhang, Yuming Huang, Piotr Kukulski, Neelotpal Dutta, Guoxin Fang, Charlie C. L. Wang

Proceedings of the IEEE International Conference on Robotics and Automation, 2023

2022

S³-Slicer: A General Slicing Framework for Multi-Axis 3D Printing.

Tianyu Zhang, Guoxin Fang, Yuming Huang, Neelotpal Dutta, Sylvain Lefebvre, Zekai Murat Kilic, Charlie C. L. Wang

ACM Trans. Graph., 2022

2021

Singularity-Aware Motion Planning for Multi-Axis Additive Manufacturing.

Tianyu Zhang, Xiangjia Chen, Guoxin Fang, Yingjun Tian, Charlie C. L. Wang

IEEE Robotics Autom. Lett., 2021

2020

Reinforced FDM: multi-axis filament alignment with controlled anisotropic strength.

Guoxin Fang, Tianyu Zhang, Sikai Zhong, Xiangjia Chen, Zichun Zhong, Charlie C. L. Wang

ACM Trans. Graph., 2020