Vinod Yadava

According to our database, Vinod Yadava authored at least 15 papers between 2005 and 2015.

Collaborative distances:

• Dijkstra number of six.
• Erdős number of five.

2015

Experimental modelling and optimisation of process parameters of hole drilling by electrical discharge machining of aerospace titanium alloy.

Umacharan Singh Yadav, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2015

2014

Modelling and simulation of spark assisted diamond face grinding of tungsten carbide-cobalt composite using ANN.

Ravindra Nath Yadav, Vinod Yadava, G. K. Singh

Int. J. Manuf. Technol. Manag., 2014

A new way of erosion-abrasion hybrid machining using slotted-diamond grinding wheel.

Ravindra Nath Yadav, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2014

Modelling of performance characteristics during sinking electrical discharge micromachining of Ti-6Al-4V thin sheet.

Rajesh Kumar Porwal, Vinod Yadava

Int. J. Manuf. Res., 2014

Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining.

Rajesh Kumar Porwal, Vinod Yadava, J. Ramkumar

Int. J. Manuf. Mater. Mech. Eng., 2014

Experimentation and prediction of material removal rate of electrical discharge micromachining of nickel-based super alloy thin sheet.

Rajesh Kumar Porwal, Vinod Yadava

Int. J. Comput. Aided Eng. Technol., 2014

2013

Three dimensional thermal finite element simulation of electro-discharge diamond surface grinding.

P. S. Balaji, Vinod Yadava

Simul. Model. Pract. Theory, 2013

Simultaneous optimisation of average kerf taper and surface roughness during pulsed Nd: YAG laser cutting of thin Al-alloy sheet for straight profile.

Amit Sharma, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2013

A study of electrochemical magnetic abrasive machining process.

K. B. Judal, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2013

Intelligent Modelling and Multi-Objective Optimisation of Laser Beam Cutting of Nickel Based Superalloy Sheet.

Amit Sharma, Vinod Yadava, K. B. Judal

Int. J. Manuf. Mater. Mech. Eng., 2013

2012

Investigation of Temperature Distribution in the Workpiece During High Speed Deep Surface Grinding using FEM.

Audhesh Narayan, Vinod Yadava

Int. J. Manuf. Mater. Mech. Eng., 2012

2011

Optimisation of cut qualities during pulsed Nd: YAG laser cutting of SUPERNI 718 thin sheet for straight profile.

Amit Sharma, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2011

2008

Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method.

Patil Makarand Ramu, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2008

2005

Temperature distribution in the workpiece due to electro-discharge diamond surface grinding using FEM.

Vinod Yadava, V. K. Jain, Prakash M. Dixit

Int. J. Manuf. Technol. Manag., 2005

Thermal stresses during electro-chemical spark machining.

R. S. Mulik, Vinod Yadava

Int. J. Manuf. Technol. Manag., 2005