Yu-Kang Lo

According to our database1, Yu-Kang Lo authored at least 71 papers between 1995 and 2021.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2021
Common-Mode Voltage Cancellation for Reducing the Common-Mode Noise in DC-DC Converters.
IEEE Trans. Ind. Electron., 2021

2017
Study and implementation of a 15-W driver for piezoelectric actuators.
Int. J. Circuit Theory Appl., 2017

2015
DSP-Based Interleaved Buck Power Factor Corrector With Adaptive Slope Compensation.
IEEE Trans. Ind. Electron., 2015

A cost-effective PWM dimming method for LED lighting applications.
Int. J. Circuit Theory Appl., 2015

2014
LED Backlight Driver Circuit With Dual-Mode Dimming Control and Current-Balancing Design.
IEEE Trans. Ind. Electron., 2014

A single-stage high power-factor bridgeless AC-LED driver for lighting applications.
Int. J. Circuit Theory Appl., 2014

Implementation and design of high-power fast charger for lithium-ion battery pack.
Int. J. Circuit Theory Appl., 2014

Analysis and design of a two-transformer active-clamping ZVS isolated inverse-SEPIC converter.
Int. J. Circuit Theory Appl., 2014

Design and implementation of a high-efficiency LiFePO<sub>4</sub> battery charger for electric vehicle applications.
Int. J. Circuit Theory Appl., 2014

Design and implementation of a high-efficiency bidirectional DC-DC Converter for DC micro-grid system applications.
Int. J. Circuit Theory Appl., 2014

A module-integrated isolated solar micro-inverter without electrolytic capacitors.
Int. J. Circuit Theory Appl., 2014

High-voltage power amplifier for flexible paper speaker applications.
Int. J. Circuit Theory Appl., 2014

Design and implementation of a contact-less power charger for robot applications.
Int. J. Circuit Theory Appl., 2014

2013
A Module-Integrated Isolated Solar Microinverter.
IEEE Trans. Ind. Electron., 2013

High-Efficiency Digital-Controlled Interleaved Power Converter for High-Power PEM Fuel-Cell Applications.
IEEE Trans. Ind. Electron., 2013

Perceptual quality based error control for scalable on-demand streaming in next-generation wireless networks.
Telecommun. Syst., 2013

Analysis and design of a dual-mode control flyback converter.
Int. J. Circuit Theory Appl., 2013

Analysis and design of a push-pull DCM boost power factor corrector.
Int. J. Circuit Theory Appl., 2013

2012
Active shunt current shaping scheme for multiple paralleled DC-DC converters.
Int. J. Circuit Theory Appl., 2012

Analysis and design of an active-clamping zero-voltage-switching isolated inverse-SEPIC converter.
Int. J. Circuit Theory Appl., 2012

Analysis and design of a half-bridge LLC series resonant converter employing two transformers.
Int. J. Circuit Theory Appl., 2012

A module-integrated isolated solar micro-inverter.
Proceedings of the IEEE 10th International Conference on Industrial Informatics, 2012

Design and implementation of a contact-less power charger for robot applications.
Proceedings of the IEEE 10th International Conference on Industrial Informatics, 2012

2011
Phase-Shifted Full-Bridge Series-Resonant DC-DC Converters for Wide Load Variations.
IEEE Trans. Ind. Electron., 2011

Design and implementation of monostable multivibrators employing differential voltage current conveyors.
Microelectron. J., 2011

OTA-based monostable multivibrators with current tuning properties.
Microelectron. J., 2011

A high-input-voltage backlight module driver for multi-lamp LCD panels.
Int. J. Circuit Theory Appl., 2011

Analysis and design of a two-transformer active-clamping forward converter with parallel-connected current doubler rectifiers.
Int. J. Circuit Theory Appl., 2011

Design of a two-output forward converter with an output voltage objective function.
Int. J. Circuit Theory Appl., 2011

Improved control-to-output characteristics of a PWM buck-boost converter.
Int. J. Circuit Theory Appl., 2011

A battery charger with maximum power point tracking function for low-power photovoltaic system applications.
Int. J. Circuit Theory Appl., 2011

A single-stage LED lamp driver with low DC bus voltage for general lighting applications.
Int. J. Circuit Theory Appl., 2011

A fuzzy control maximum power point tracking photovoltaic system.
Proceedings of the FUZZ-IEEE 2011, 2011

2010
A Single-Stage Soft-Switching Flyback Converter for Power-Factor-Correction Applications.
IEEE Trans. Ind. Electron., 2010

A High-Efficiency Dimmable LED Driver for Low-Power Lighting Applications.
IEEE Trans. Ind. Electron., 2010

Electromagnetic Interference Suppression Techniques for Compact LED lamp Drivers.
J. Circuits Syst. Comput., 2010

A Single-Stage Phase-Shifted Full-Bridge Electronic Ballast for High-Pressure Mercury Lamps.
J. Circuits Syst. Comput., 2010

Current-input OTRA Schmitt trigger with dual hysteresis modes.
Int. J. Circuit Theory Appl., 2010

A single-stage phase-shifted full-bridge AC/DC converter with variable frequency control.
Int. J. Circuit Theory Appl., 2010

2009
Design and Implementation of RGB LED Drivers for LCD Backlight Modules.
IEEE Trans. Ind. Electron., 2009

Analysis and Design of a Photovoltaic System DC Connected to the Utility With a Power Factor Corrector.
IEEE Trans. Ind. Electron., 2009

A Fast Transient Recovery Module for DC-DC Converters.
IEEE Trans. Ind. Electron., 2009

Design of an RGB LED Backlight Circuit for Liquid Crystal Display Panels.
IEEE Trans. Ind. Electron., 2009

Current-controllable monostable multivibrator with retriggerable function.
Microelectron. J., 2009

Erratum: "tunable Waveform Generators Using Single Dual-Current Output OTAS".
J. Circuits Syst. Comput., 2009

A DC/DC converter topology for renewable energy systems.
Int. J. Circuit Theory Appl., 2009

2008
A High-Efficiency AC-to-DC Adaptor With a Low Standby Power Consumption.
IEEE Trans. Ind. Electron., 2008

Improved Commutation Method for a Full-Bridge Current-Source Inverter.
IEEE Trans. Ind. Electron., 2008

Grid-Connected Photovoltaic System With Power Factor Correction.
IEEE Trans. Ind. Electron., 2008

Design and Implementation of a Single-Stage High-Frequency HID Lamp Electronic Ballast.
IEEE Trans. Ind. Electron., 2008

Tunable Waveform Generators Using Single Dual-Current Output OTAS.
J. Circuits Syst. Comput., 2008

Dead-time assignment for single-phase half-bridge PWM inverters.
Int. J. Circuit Theory Appl., 2008

On setting the DC voltage level of an active power filter.
Int. J. Circuit Theory Appl., 2008

Trans-admittance control for eliminating the temperature effect of piezoelectric transformer in the CCFL backlight module.
Int. J. Circuit Theory Appl., 2008

Analysis and elimination of the output voltage imbalance for a half-bridge boost rectifier under mismatched loads.
Int. J. Circuit Theory Appl., 2008

Switch-controllable OTRA-based bistable multivibrators.
IET Circuits Devices Syst., 2008

2007
Automatic EMI Measurement and Filter Design System for Telecom Power Supplies.
IEEE Trans. Instrum. Meas., 2007

Feedback Design of a Piezoelectric Transformer-Based Half-Bridge Resonant CCFL Inverter.
IEEE Trans. Ind. Electron., 2007

Switching-Frequency Control for Regulated Discontinuous-Conduction-Mode Boost Rectifiers.
IEEE Trans. Ind. Electron., 2007

Analysis and Design of an Interleaved Active-Clamping Forward Converter.
IEEE Trans. Ind. Electron., 2007

Switch-Controllable OTRA-Based Square/Triangular Waveform Generator.
IEEE Trans. Circuits Syst. II Express Briefs, 2007

Single OTRA-based current-mode monostable multivibrator with two triggering modes and a reduced recovery time.
IET Circuits Devices Syst., 2007

2006
Current-Mode Monostable Multivibrators Using OTRAs.
IEEE Trans. Circuits Syst. II Express Briefs, 2006

2002
Analysis and elimination of voltage imbalance between the split capacitors in half-bridge boost rectifiers.
IEEE Trans. Ind. Electron., 2002

On evaluating the current distortion of the single-phase switch-mode rectifiers with current slope maps.
IEEE Trans. Ind. Electron., 2002

2001
Coupling analysis of a three-phase power-factor corrector composed of three single-phase modules.
IEEE Trans. Ind. Electron., 2001

2000
A software-based CM and DM measurement system for the conducted EMI.
IEEE Trans. Ind. Electron., 2000

Dual hysteresis loops for a high-performance four-switch boost rectifier.
IEEE Trans. Ind. Electron., 2000

Constant-switching-frequency control of switch-mode rectifiers without current sensors.
IEEE Trans. Ind. Electron., 2000

1999
A reduced hysteresis controller for a four-switch three-phase bidirectional power electronics interface.
IEEE Trans. Ind. Electron., 1999

1995
An improved cosine-mode controller for SCR converters.
IEEE Trans. Ind. Electron., 1995


  Loading...