Huang-Jen Chiu

Orcid: 0000-0002-7638-0025

According to our database1, Huang-Jen Chiu authored at least 75 papers between 1999 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
A Circular Layout for Parallel SiC Power Devices with Parasitic Inductance Model.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Motor Speed Control Based on Enhanced Indirect-Field-Oriented Control Using Convolutional Neural Network.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022
Improved Direct Torque Control of Induction Motor for Torque Ripple Minimization.
IEEE Access, 2022

Triangular Conduction Mode (TCM) Operation in a High Voltage Gain DC-DC Converter.
Proceedings of the 31st IEEE International Symposium on Industrial Electronics, 2022

2021
Equivalent Circuit Approach for Output Characteristic Design of Capacitive Power Transfer.
IEEE Trans. Circuits Syst. II Express Briefs, 2021

Enhanced Time Average Model of Three Phase Voltage Source Converter Taking Dead-Time Distortion Effect Into Account.
IEEE Access, 2021

High Power Dual Active Bridge Converter in Wide Voltage Range Application.
Proceedings of the 2021 International Conference on Fuzzy Theory and Its Applications, 2021

2020
Analysis and Implementation of a High Voltage Gain 1 MHz Bidirectional DC-DC Converter.
IEEE Trans. Ind. Electron., 2020

Quarter-Turn Transformer Design and Optimization for High Power Density 1-MHz LLC Resonant Converter.
IEEE Trans. Ind. Electron., 2020

2018
Hybrid Switched-Inductor Buck PFC Converter for High-Efficiency LED Drivers.
IEEE Trans. Circuits Syst. II Express Briefs, 2018

A novel active-clamp zero-voltage-switching buck-boost converter.
Int. J. Circuit Theory Appl., 2018

2017
High-Efficiency Wireless Power Transfer System for Electric Vehicle Applications.
IEEE Trans. Circuits Syst. II Express Briefs, 2017

A novel low-loss control strategy for bidirectional DC-DC converter.
Int. J. Circuit Theory Appl., 2017

Study and implementation of a 15-W driver for piezoelectric actuators.
Int. J. Circuit Theory Appl., 2017

Design and implementation of 1 MHz active-clamped resonant flyback converter.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Highly efficient isolated solar micro-inverter.
Proceedings of the IECON 2016, 2016

A new digital control strategy of boost PFC at high-line light-load condition.
Proceedings of the IEEE International Conference on Industrial Technology, 2016

High step-up forward-flyback converter with parallel output.
Proceedings of the IEEE International Conference on Industrial Technology, 2016

Hybrid-switching asymmetrical half-bridge flyback DC-DC converter.
Proceedings of the IEEE International Conference on Industrial Technology, 2016

2015
DSP-Based Interleaved Buck Power Factor Corrector With Adaptive Slope Compensation.
IEEE Trans. Ind. Electron., 2015

A cost-effective PWM dimming method for LED lighting applications.
Int. J. Circuit Theory Appl., 2015

2014
LED Backlight Driver Circuit With Dual-Mode Dimming Control and Current-Balancing Design.
IEEE Trans. Ind. Electron., 2014

A single-stage high power-factor bridgeless AC-LED driver for lighting applications.
Int. J. Circuit Theory Appl., 2014

Design and implementation of a high-efficiency LiFePO<sub>4</sub> battery charger for electric vehicle applications.
Int. J. Circuit Theory Appl., 2014

Design and implementation of a high-efficiency bidirectional DC-DC Converter for DC micro-grid system applications.
Int. J. Circuit Theory Appl., 2014

A module-integrated isolated solar micro-inverter without electrolytic capacitors.
Int. J. Circuit Theory Appl., 2014

High-voltage power amplifier for flexible paper speaker applications.
Int. J. Circuit Theory Appl., 2014

Design and implementation of a contact-less power charger for robot applications.
Int. J. Circuit Theory Appl., 2014

2013
A Module-Integrated Isolated Solar Microinverter.
IEEE Trans. Ind. Electron., 2013

High-Efficiency Digital-Controlled Interleaved Power Converter for High-Power PEM Fuel-Cell Applications.
IEEE Trans. Ind. Electron., 2013

A new digital control method for a voltage source inverter to compensate for imbalance of output voltage.
Int. J. Circuit Theory Appl., 2013

Analysis and design of a push-pull DCM boost power factor corrector.
Int. J. Circuit Theory Appl., 2013

2012
A novel energy-retaining inverter for AC arc welding machines.
Int. J. Circuit Theory Appl., 2012

Active shunt current shaping scheme for multiple paralleled DC-DC converters.
Int. J. Circuit Theory Appl., 2012

A module-integrated isolated solar micro-inverter.
Proceedings of the IEEE 10th International Conference on Industrial Informatics, 2012

Design and implementation of a contact-less power charger for robot applications.
Proceedings of the IEEE 10th International Conference on Industrial Informatics, 2012

2011
A Simple Inverter for Arc-Welding Machines With Current Doubler Rectifier.
IEEE Trans. Ind. Electron., 2011

A Dual-Mode Controller for the Boost PFC Converter.
IEEE Trans. Ind. Electron., 2011

A high-input-voltage backlight module driver for multi-lamp LCD panels.
Int. J. Circuit Theory Appl., 2011

Analysis and design of a two-transformer active-clamping forward converter with parallel-connected current doubler rectifiers.
Int. J. Circuit Theory Appl., 2011

A battery charger with maximum power point tracking function for low-power photovoltaic system applications.
Int. J. Circuit Theory Appl., 2011

A single-stage LED lamp driver with low DC bus voltage for general lighting applications.
Int. J. Circuit Theory Appl., 2011

A fuzzy control maximum power point tracking photovoltaic system.
Proceedings of the FUZZ-IEEE 2011, 2011

2010
A Single-Stage Soft-Switching Flyback Converter for Power-Factor-Correction Applications.
IEEE Trans. Ind. Electron., 2010

A High-Efficiency Dimmable LED Driver for Low-Power Lighting Applications.
IEEE Trans. Ind. Electron., 2010

Electromagnetic Interference Suppression Techniques for Compact LED lamp Drivers.
J. Circuits Syst. Comput., 2010

A Single-Stage Phase-Shifted Full-Bridge Electronic Ballast for High-Pressure Mercury Lamps.
J. Circuits Syst. Comput., 2010

Current-input OTRA Schmitt trigger with dual hysteresis modes.
Int. J. Circuit Theory Appl., 2010

A single-stage phase-shifted full-bridge AC/DC converter with variable frequency control.
Int. J. Circuit Theory Appl., 2010

2009
Design and Implementation of RGB LED Drivers for LCD Backlight Modules.
IEEE Trans. Ind. Electron., 2009

Analysis and Design of a Photovoltaic System DC Connected to the Utility With a Power Factor Corrector.
IEEE Trans. Ind. Electron., 2009

A Fast Transient Recovery Module for DC-DC Converters.
IEEE Trans. Ind. Electron., 2009

Design of an RGB LED Backlight Circuit for Liquid Crystal Display Panels.
IEEE Trans. Ind. Electron., 2009

Erratum: "tunable Waveform Generators Using Single Dual-Current Output OTAS".
J. Circuits Syst. Comput., 2009

A DC/DC converter topology for renewable energy systems.
Int. J. Circuit Theory Appl., 2009

Design considerations of an SEPIC PFC converter for driving multiple lighting LED lamps.
Int. J. Circuit Theory Appl., 2009

2008
Design and Implementation of a Single-Stage High-Frequency HID Lamp Electronic Ballast.
IEEE Trans. Ind. Electron., 2008

Tunable Waveform Generators Using Single Dual-Current Output OTAS.
J. Circuits Syst. Comput., 2008

Trans-admittance control for eliminating the temperature effect of piezoelectric transformer in the CCFL backlight module.
Int. J. Circuit Theory Appl., 2008

Analysis and elimination of the output voltage imbalance for a half-bridge boost rectifier under mismatched loads.
Int. J. Circuit Theory Appl., 2008

An improved single-stage Flyback PFC converter for high-luminance lighting LED lamps.
Int. J. Circuit Theory Appl., 2008

Switch-controllable OTRA-based bistable multivibrators.
IET Circuits Devices Syst., 2008

A Single-Stage SEPIC PFC Converter for Multiple Lighting LED Lamps.
Proceedings of the 4th IEEE International Symposium on Electronic Design, 2008

2007
Automatic EMI Measurement and Filter Design System for Telecom Power Supplies.
IEEE Trans. Instrum. Meas., 2007

Eliminating the Temperature Effect of Piezoelectric Transformer in Backlight Electronic Ballast by Applying the Digital Phase-Locked-Loop Technique.
IEEE Trans. Ind. Electron., 2007

Single-Stage Voltage Source Charge-Pump Electronic Ballast With Switched-Capacitor Dimmer for Multiple Fluorescent Lamps.
IEEE Trans. Ind. Electron., 2007

LED Backlight Driving System for Large-Scale LCD Panels.
IEEE Trans. Ind. Electron., 2007

2005
A high-efficiency soft-switched AC/DC converter with current-doubler synchronous rectification.
IEEE Trans. Ind. Electron., 2005

2002
Analysis and elimination of voltage imbalance between the split capacitors in half-bridge boost rectifiers.
IEEE Trans. Ind. Electron., 2002

On evaluating the current distortion of the single-phase switch-mode rectifiers with current slope maps.
IEEE Trans. Ind. Electron., 2002

2001
Coupling analysis of a three-phase power-factor corrector composed of three single-phase modules.
IEEE Trans. Ind. Electron., 2001

2000
A software-based CM and DM measurement system for the conducted EMI.
IEEE Trans. Ind. Electron., 2000

Dual hysteresis loops for a high-performance four-switch boost rectifier.
IEEE Trans. Ind. Electron., 2000

Constant-switching-frequency control of switch-mode rectifiers without current sensors.
IEEE Trans. Ind. Electron., 2000

1999
A reduced hysteresis controller for a four-switch three-phase bidirectional power electronics interface.
IEEE Trans. Ind. Electron., 1999


  Loading...