Aldo Boglietti

Orcid: 0000-0003-4756-4922

According to our database1, Aldo Boglietti authored at least 29 papers between 2007 and 2021.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Awards

IEEE Fellow

IEEE Fellow 2012, "For contributions to analysis of magnetic materials and AC electrical machines".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2021
Sustainability Aspects of Electrical Machines For E-Mobility Applications Part I: A Design with Reduced Rare-earth Elements.
Proceedings of the IECON 2021, 2021

2020
Measurement Technique for the Permanent Magnet Rotor Thermal Time Constant Determination.
Proceedings of the 2020 IEEE International Conference on Industrial Technology, 2020

2019
Transient Thermal Modeling and Analysis of Railway Traction Motors.
IEEE Trans. Ind. Electron., 2019

2017
Soft Magnetic Material Status and Trends in Electric Machines.
IEEE Trans. Ind. Electron., 2017

2016
Stator-Winding Thermal Models for Short-Time Thermal Transients: Definition and Validation.
IEEE Trans. Ind. Electron., 2016

Thermal parameters evaluation for stator fractional-slot concentrated winding machines.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

2015
Hysteresis Losses in Sintered NdFeB Permanent Magnets in Rotating Electrical Machines.
IEEE Trans. Ind. Electron., 2015

Analysis of different forced convection cooling systems for belt-driven starter-generator.
Proceedings of the IECON 2015, 2015

Winding thermal model for short-time thermal transient: Validation in motor operative conditions.
Proceedings of the IECON 2015, 2015

2014
High-Speed Electrical Machines: Technologies, Trends, and Developments.
IEEE Trans. Ind. Electron., 2014

High-Speed Electrical Machines and Drives.
IEEE Trans. Ind. Electron., 2014

Electrical machine first order short-time thermal transients model: Measurements and parameters evaluation.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Test rig for induction motor quasi-static electromechanical characteristic determination.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
Interchanging induction motors for fifty Hertz and sixty Hertz operation.
Proceedings of the IECON 2013, 2013

2012
Guest Editorial.
IEEE Trans. Ind. Electron., 2012

Low cost solutions to reduce cogging torque and acoustic noise of small brushed DC motors for automotive radiator Cooling Fan Modules.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Influence of the sinusoidal supply frequency on the induction motor stray load losses.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Computational Algorithms for Induction Motor Equivalent Circuit Parameter Determination - Part II: Skin Effect and Magnetizing Characteristics.
IEEE Trans. Ind. Electron., 2011

Computational Algorithms for Induction-Motor Equivalent Circuit Parameter Determination - Part I: Resistances and Leakage Reactances.
IEEE Trans. Ind. Electron., 2011

2010
Estimation of Iron Losses in Induction Motors: Calculation Method, Results, and Analysis.
IEEE Trans. Ind. Electron., 2010

2009
Evolution and Modern Approaches for Thermal Analysis of Electrical Machines.
IEEE Trans. Ind. Electron., 2009

2008
Iron Loss Prediction With PWM Supply Using Low- and High-Frequency Measurements: Analysis and Results Comparison.
IEEE Trans. Ind. Electron., 2008

Efficiency Analysis of PWM Inverter Fed Three-Phase and Dual Three-Phase High Frequency Induction Machines for Low/Medium Power Applications.
IEEE Trans. Ind. Electron., 2008

A General Model of the Laminated Steel Losses in Electric Motors with PWM Voltage Supply.
Proceedings of the Industry Applications Society Annual Meeting, 2008

End Space Heat Transfer Coefficient Determination for Different Induction Motor Enclosure Types.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Isolating the Impact of PWM Modulation on Motor Iron Losses.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Determination of Critical Parameters in Electrical Machine Thermal Models.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Factors Affecting Losses in Induction Motors with Non-Sinusoidal Supply.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Iron Loss Prediction with PWM Supply: An Overview of Proposed Methods from an Engineering Application Point of View.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007


  Loading...