Fabrizio Marignetti

Orcid: 0000-0001-8776-4561

According to our database1, Fabrizio Marignetti authored at least 31 papers between 2006 and 2023.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
The Demagnetization Phenomenon in PM Machines: Principles, Modeling, and Design Considerations.
IEEE Access, 2023

2022
Predicting the eddy current loss of a large nuclear power turbo generator using a fuzzy c-means deep Gaussian process regression model.
Appl. Soft Comput., 2022

2019
Modelling and Simulation of a Vibrating Linear Machine for Testing of Electronic Apparatus.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Differential Leakage Factor in Electrical Machines Equipped with Asymmetrical Multiphase Windings: a General Investigation.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Labview FPGA-based Space Vector Modulation Control of 3-Phase Voltage Source Inverter.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

2018
Pole Shape-Based Reduction of the Harmonic Content of the IPM T-LSM Air Gap Flux Density.
IEEE Trans. Ind. Electron., 2018

Electromagnetic Design and Modeling of a Two-Phase Axial-Flux Printed Circuit Board Motor.
IEEE Trans. Ind. Electron., 2018

A nonlinear optimal control approach for PM Linear Synchronous Motors.
Proceedings of the 16th IEEE International Conference on Industrial Informatics, 2018

A general procedure for the construction of Gorges polygons for multi-phase windings of electrical machines.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Automotive propulsion drive emulation using two cascaded inverters.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

A simple assessment of the dynamics of the road vehicles.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

On the enhancement of the starting capabilities of single phase line-start PMSMs.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

2016
Fiber Bragg Grating Sensor for Electric Field Measurement in the End Windings of High-Voltage Electric Machines.
IEEE Trans. Ind. Electron., 2016

Electromagnetic sizing of axial-field flux switching permanent magnet machine.
Proceedings of the IECON 2016, 2016

Software-in-the-loop simulation of a test system for automotive electric drives.
Proceedings of the IECON 2016, 2016

2015
An Online Method for Static Eccentricity Fault Detection in Axial Flux Machines.
IEEE Trans. Ind. Electron., 2015

Design of a drivetrain for a light urban electric vehicle powered by fuel cells.
Proceedings of the 1st IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2015

2014
Analysis of Eccentricity in Permanent-Magnet Tubular Machines.
IEEE Trans. Ind. Electron., 2014

2012
Electromagnetic Analysis of Axial-Flux Permanent Magnet Synchronous Machines With Fractional Windings With Experimental Validation.
IEEE Trans. Ind. Electron., 2012

Cryogenic Characterization of Copper-Wound Linear Tubular Actuators.
IEEE Trans. Ind. Electron., 2012

Analytical and Multiphysics Approach to the Optimal Design of a 10-MW DFIG for Direct-Drive Wind Turbines.
IEEE Trans. Ind. Electron., 2012

2011
Assessment of Fuel Cell Performance Under Different Air Stoichiometries and Fuel Composition.
IEEE Trans. Ind. Electron., 2011

2010
Multiphysics Approach to Numerical Modeling of a Permanent-Magnet Tubular Linear Motor.
IEEE Trans. Ind. Electron., 2010

A System-on-Chip Sensorless Control for a Permanent-Magnet Synchronous Motor.
IEEE Trans. Ind. Electron., 2010

2008
Design of Axial Flux PM Synchronous Machines Through 3-D Coupled Electromagnetic Thermal and Fluid-Dynamical Finite-Element Analysis.
IEEE Trans. Ind. Electron., 2008

Linear Motors for Astronomical Mirrors.
Proceedings of the Industry Applications Society Annual Meeting, 2008

On Liquid-Nitrogen-Cooled Copper-Wound Machines with Soft Magnetic Composite Core.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Modeling and Control of a Zero-Current-Switching DC/AC Current-Source Inverter.
IEEE Trans. Ind. Electron., 2007

Analytical Formulation of Radial Magnetic Forces in PM Linear Tubular Machines with Translator Eccentricity.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Gate-Level Simulation of a FPGA-Based PMSM Drive Sensorless Control.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2006
A Tubular-Generator Drive For Wave Energy Conversion.
IEEE Trans. Ind. Electron., 2006


  Loading...