Cost Minimization of a Permanent Magnet Eddy Current Brake by Multiobjective Particle Swarm Optimization Based on Nonlinear Reluctance Network Modeling.

[BibT_eX]

[DOI]

Mehmet Gulec

Pia Lindh

Metin Aydin

Juha Pyrhönen

IEEE Access, 2021

Impact of the Current Vector Angle on the Performance of a Synchronous Reluctance Motor With an Axially Laminated Anisotropic Rotor.

[BibT_eX]

[DOI]

IEEE Access, 2021

Exciter Remanence Effect Mitigation in a Brushless Synchronous Generator for Test-field Applications.

[BibT_eX]

[DOI]

Proceedings of the IECON 2021, 2021

2020

Voltage-Source Converter Energy Efficiency Classification in Accordance With IEC 61800-9-2.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2020

Fault-Tolerant Modular Stator Concentrated Winding Permanent Magnet Machine.

[BibT_eX]

[DOI]

IEEE Access, 2020

Analysis of a Tooth-Coil Winding Permanent-Magnet Synchronous Machine With an Unequal Teeth Width.

[BibT_eX]

[DOI]

IEEE Access, 2020

Third-Order Harmonics in Synchronous Reluctance Motors With an Axially Laminated Anisotropic Rotor and Their Impact on the Motor Losses.

[BibT_eX]

[DOI]

IEEE Access, 2020

Synchronous Reluctance Motors With an Axially Laminated Anisotropic Rotor as an Alternative in High-Speed Applications.

[BibT_eX]

[DOI]

IEEE Access, 2020

Influence of Magnetic and Nonmagnetic Layers in an Axially Laminated Anisotropic Rotor of a High-Speed Synchronous Reluctance Motor Including Manufacturing Aspects.

[BibT_eX]

[DOI]

IEEE Access, 2020

2019

Squirrel-Cage Rotor Design and Manufacturing for High-Speed Applications.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2019

High-Torque-Density IPMSM Rotor Pole Geometry Adjustment for Smooth Torque.

[BibT_eX]

[DOI]

IEEE Access, 2019

Integration Principles and Thermal Analysis of an Oil-Cooled and -Lubricated Permanent Magnet Motor Planetary Gearbox Drive System.

[BibT_eX]

[DOI]

IEEE Access, 2019

A New Traction Motor System With Integrated-Gear: A Solution for Off-Road Machinery.

[BibT_eX]

[DOI]

IEEE Access, 2019

Performance of a Direct-Liquid-Cooled Motor in an Electric Bus Under Different Load Cycles.

[BibT_eX]

[DOI]

IEEE Access, 2019

Accelerating the Time-Stepping Finite-Element Analysis of Induction Machines in Transient-Magnetic Solutions.

[BibT_eX]

[DOI]

IEEE Access, 2019

Design of a High-Speed Solid-Rotor Induction Machine With an Asymmetric Winding and Suppression of the Current Unbalance by Special Coil Arrangements.

[BibT_eX]

[DOI]

Chong Di

Ilya Petrov

Juha J. Pyrhönen

IEEE Access, 2019

Extraction of Rotor Eddy-Current Harmonic Losses in High-Speed Solid-Rotor Induction Machines by an Improved Virtual Permanent Magnet Harmonic Machine Model.

[BibT_eX]

[DOI]

Chong Di

Ilya Petrov

Juha J. Pyrhönen

IEEE Access, 2019

Solid-Rotor Material Selection for Squirrel-Cage High-Speed Solid-Rotor Induction Machine.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

The Instrumentation Influence on the Motor Loss Determination Uncertainty.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

Design of a Stainless Core Submersible Permanent Magnet Generator for Tidal Energy.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

Linear Recoil Curve Demagnetization Models for Rare-Earth Magnets in Electrical Machines.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

Experimental Investigation of the Losses and Efficiency of 75 kW Induction Motor Drive System.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

2018

Hysteresis Loss in Ferrite Permanent Magnets in Rotating Electrical Machinery.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2018

Model-Based Hysteresis Loss Assessment in PMSMs With Ferrite Magnets.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2018

Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2018

2017

Design Aspects of High-Speed Electrical Machines With Active Magnetic Bearings for Compressor Applications.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

High-Speed Electrical Machine with Active Magnetic Bearing System Optimization.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

Rotor Surface Ferrite Permanent Magnets in Electrical Machines: Advantages and Limitations.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

Hysteresis Losses in Different Types of Permanent Magnets Used in PMSMs.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

Direct Liquid Cooling Method Verified With an Axial-Flux Permanent-Magnet Traction Machine Prototype.

[BibT_eX]

[DOI]

Miguel Martínez-Iturralde

Marco Satrustegui

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2017

Direct-on-line-start permanent-magnet-assisted synchronous reluctance machine with ferrite magnets.

[BibT_eX]

[DOI]

Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Experimental and FEM verification of cogging forces of a permanent magnet linear motor with a discontinuous magnet track.

[BibT_eX]

[DOI]

Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Technology comparison of induction motor and synchronous reluctance motor.

[BibT_eX]

[DOI]

Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Linear recoil curve demagnetization models for ferrite magnets in rotating machinery.

[BibT_eX]

[DOI]

Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Analysis of damper winding designs for direct-on-line synchronous reluctance motor.

[BibT_eX]

[DOI]

Valerii Abramenko

Ilya Petrov

Juha J. Pyrhönen

Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Overview of calorimetric systems used in loss determination of electric motors and drives.

[BibT_eX]

[DOI]

Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016

Multidisciplinary Design Process of a 6-Slot 2-Pole High-Speed Permanent-Magnet Synchronous Machine.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

Iron Loss Analysis of the Permanent-Magnet Synchronous Machine Based on Finite-Element Analysis Over the Electrical Vehicle Drive Cycle.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

Online Identification of a Mechanical System in Frequency Domain Using Sliding DFT.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

Multidisciplinary Design of a Permanent-Magnet Traction Motor for a Hybrid Bus Taking the Load Cycle into Account.

[BibT_eX]

[DOI]

Pia Lindh

Mohammad Gerami Tehrani

IEEE Trans. Ind. Electron., 2016

Rotor Eddy-Current Losses Reduction in an Axial Flux Permanent-Magnet Machine.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

Analysis of 37-kW Converter-Fed Induction Motor Losses.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

Application of Calorimetric Method for Loss Measurement of a SynRM Drive System.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

PWM power distribution and switching frequency analysis in motor drives.

[BibT_eX]

[DOI]

Proceedings of the IECON 2016, 2016

2015

Drive Cycle Analysis of a Permanent-Magnet Traction Motor Based on Magnetostatic Finite-Element Analysis.

[BibT_eX]

[DOI]

IEEE Trans. Veh. Technol., 2015

Hysteresis Losses in Sintered NdFeB Permanent Magnets in Rotating Electrical Machines.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2015

Hybrid Cooling Method of Axial-Flux Permanent-Magnet Machines for Vehicle Applications.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2015

Online Estimation of Linear Tooth Belt Drive System Parameters.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2015

An analysis of the 6-slot 2-pole high-speed permanent magnet synchronous machines with tooth-coil windings.

[BibT_eX]

[DOI]

Nikita Uzhegov

Janne Nerg

Juha Pyrhönen

Proceedings of the IECON 2015, 2015

2014

Inductance Calculation of Tooth-Coil Permanent-Magnet Synchronous Machines.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2014

Direct-Driven Interior Magnet Permanent-Magnet Synchronous Motors for a Full Electric Sports Car.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2014

Design of a Traction Motor With Tooth-Coil Windings and Embedded Magnets.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2014

Loss Definition of Electric Drives by a Calorimetric System With Data Processing.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2014

Feasibility of an Armature-Reaction-Compensated Permanent-Magnet Synchronous Generator in Island Operation.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2014

AC Resistance Factor of Litz-Wire Windings Used in Low-Voltage High-Power Generators.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2014

2013

Effect of Slot-and-Pole Combination on the Leakage Inductance and the Performance of Tooth-Coil Permanent-Magnet Synchronous Machines.

[BibT_eX]

[DOI]

Pavel Ponomarev

Pia Lindh

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2013

Performance of Low-Cost Permanent Magnet Material in PM Synchronous Machines.

[BibT_eX]

[DOI]

Ilya Petrov

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2013

Design Principles of Permanent Magnet Synchronous Machines for Parallel Hybrid or Traction Applications.

[BibT_eX]

[DOI]

Katteden Kamiev

Juho Montonen

Mahendarkar Prabhakaran Ragavendra

Juha J. Pyrhönen

Juan A. Tapia

Markku Niemela

IEEE Trans. Ind. Electron., 2013

Local Heat Flux Measurement in a Permanent Magnet Motor at No Load.

[BibT_eX]

[DOI]

Hanne K. Jussila

Andrey V. Mityakov

Sergey Z. Sapozhnikov

Vladimir Y. Mityakov

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2013

Passive $LC$ Filter Design Considerations for Motor Applications.

[BibT_eX]

[DOI]

Valentin Dzhankhotov

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2013

Loss minimization in high-speed Permanent Magnet Synchronous Machines with tooth-coil windings.

[BibT_eX]

[DOI]

Nikita Uzhegov

Juha J. Pyrhönen

Sergey V. Shirinskii

Proceedings of the IECON 2013, 2013

Current linkage harmonics and air-gap harmonic leakage inductance of tooth-coil permanent-magnet synchronous machines.

[BibT_eX]

[DOI]

Pavel Ponomarev

Juha J. Pyrhönen

Proceedings of the IECON 2013, 2013

Rotor surface ferrite magnet synchronous machine for generator use in a hybrid application - Electro-magnetic and thermal analysis.

[BibT_eX]

[DOI]

Ilya Petrov

Maria Polikarpova

Juha J. Pyrhönen

Proceedings of the IECON 2013, 2013

Influence of wedge material on losses of a traction motor with tooth-coil windings.

[BibT_eX]

[DOI]

Proceedings of the IECON 2013, 2013

Scalable open- and balance-type calorimeter for measuring power electronics and motors.

[BibT_eX]

[DOI]

Proceedings of the IECON 2013, 2013

Sensorless positioning of a non-salient permanent magnet linear motor by combining open-loop current angle rotation method and back-EMF estimator.

[BibT_eX]

[DOI]

Proceedings of the IECON 2013, 2013

Frequency converter driven induction motor losses.

[BibT_eX]

[DOI]

Proceedings of the IECON 2013, 2013

2012

Permanent Magnet Synchronous Machine Sizing: Effect on the Energy Efficiency of an Electro-Hydraulic Forklift.

[BibT_eX]

[DOI]

Tatiana A. Minav

Juha J. Pyrhönen

Lasse I. E. Laurila

IEEE Trans. Ind. Electron., 2012

Hybrid LC Filter Electrical Design Considerations.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2012

Measurements and Simulations of DTC Voltage Source Converter and Induction Motor Losses.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2012

2011

Dynamic Torque Analysis of a Wind Turbine Drive Train Including a Direct-Driven Permanent-Magnet Generator.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2011

A New Passive Hybrid Air-Core Foil Filter for Modern Power Drives.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2011

2010

High-Speed High-Output Solid-Rotor Induction-Motor Technology for Gas Compression.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2010

2008

Thermal Analysis of Radial-Flux Electrical Machines With a High Power Density.

[BibT_eX]

[DOI]

Janne Nerg

Marko Rilla

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2008

2004

Limitation of the load angle in a direct-torque-controlled synchronous machine drive.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2004

2003

Estimation of the flux linkage in a direct-torque-controlled drive.

[BibT_eX]

[DOI]

Julius Luukko

Markku Niemelä

Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2003

Juha J. Pyrhönen

Timeline

Legend:

Links

Online presence:

On csauthors.net:

Bibliography

Loading...