Christian Kreiner

Orcid: 0000-0001-8354-8415

According to our database1, Christian Kreiner authored at least 163 papers between 1998 and 2020.

Collaborative distances:

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2020
Combined automotive safety and security pattern engineering approach.
Reliab. Eng. Syst. Saf., 2020

2019
Safety Architecture Pattern System with Security Aspects.
Trans. Pattern Lang. Program., 2019

2018
Extending Automotive SPICE 3.0 for the use in ADAS and future self-driving service architectures.
J. Softw. Evol. Process., 2018

Signal-Layer Security and Trust-Boundary Identification based on Hardware-Software Interface Definition.
J. Ubiquitous Syst. Pervasive Networks, 2018

Integration Analysis of a Transmission Unit for Automated Driving Vehicles.
Proceedings of the Computer Safety, Reliability, and Security, 2018

Integrating SEooC Components in Highly Automated Vehicles.
Proceedings of the Systems, Software and Services Process Improvement, 2018

Towards Executable Dependability Properties.
Proceedings of the Systems, Software and Services Process Improvement, 2018

IoT Device Security the Hard(ware) way.
Proceedings of the 23rd European Conference on Pattern Languages of Programs, 2018

Patterns for Implementing Uncertainty Propagation.
Proceedings of the 23rd European Conference on Pattern Languages of Programs, 2018

Separation of processing and coordination in computer systems.
Proceedings of the 23rd European Conference on Pattern Languages of Programs, 2018

A Microservice Architecture for the Industrial Internet-Of-Things.
Proceedings of the 23rd European Conference on Pattern Languages of Programs, 2018

Increasing the Visibility of Requirements Based on Combined Variability Management.
Proceedings of the Business Modeling and Software Design - 8th International Symposium, 2018

Dynamic Adaption to Permanent Memory Faults in Industrial Control Systems.
Proceedings of the 9th International Conference on Ambient Systems, 2018

2017
SaVeSoC: safety aware virtual prototype generation and evaluation of a system on chip.
Proceedings of the Symposium on Model-driven Approaches for Simulation Engineering, Mod4Sim 2017, Virginia Beach, VA, USA, April 23, 2017

Automotive SPICE, Safety and Cybersecurity Integration.
Proceedings of the Computer Safety, Reliability, and Security, 2017

Systematic Pattern Approach for Safety and Security Co-engineering in the Automotive Domain.
Proceedings of the Computer Safety, Reliability, and Security, 2017

Integration of Integrity Enforcing Technologies into Embedded Control Devices: Experiences and Evaluation.
Proceedings of the 22nd IEEE Pacific Rim International Symposium on Dependable Computing, 2017

Automotive Quality Universities - AQU - Integration of Modular Content into the Higher Education Studies.
Proceedings of the Systems, Software and Services Process Improvement, 2017

Supporting the Integration of New Security Features in Embedded Control Devices Through the Digitalization of Production.
Proceedings of the Systems, Software and Services Process Improvement, 2017

Need for the Continuous Evolution of Systems Engineering Practices for Modern Vehicle Engineering.
Proceedings of the Systems, Software and Services Process Improvement, 2017

Towards Dependability Engineering of Cooperative Automotive Cyber-Physical Systems.
Proceedings of the Systems, Software and Services Process Improvement, 2017

A Metric for Evaluating Residual Complexity in Software.
Proceedings of the Systems, Software and Services Process Improvement, 2017

The Potential of Self-Adaptive Software Systems in Industrial Control Systems.
Proceedings of the Systems, Software and Services Process Improvement, 2017

Industry 4.0 as Digitalization over the Entire Product Lifecycle: Opportunities in the Automotive Domain.
Proceedings of the Systems, Software and Services Process Improvement, 2017

Insertion Spaces.
Proceedings of the 22nd European Conference on Pattern Languages of Programs, 2017

Physical Quantity: Towards a Pattern Language for Quantities and Units in Physical Calculations.
Proceedings of the 22nd European Conference on Pattern Languages of Programs, 2017

Patterns grasping the trade-off between distributing data and information.
Proceedings of the 22nd European Conference on Pattern Languages of Programs, 2017

An Integrated Approach for Resilience in Industrial Control Systems.
Proceedings of the 47th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops, 2017

Combining Business Process Variability and Software Variability Using Traceable Links.
Proceedings of the Business Modeling and Software Design - 7th International Symposium, 2017

SHARC - Simulation and Verification of Hierarchical Embedded Microelectronic Systems.
Proceedings of the 8th International Conference on Ambient Systems, 2017

An Automotive Signal-Layer Security and Trust-Boundary Identification Approach.
Proceedings of the 8th International Conference on Ambient Systems, 2017

2016
Seamless Integrated Simulation in Design and Verification Flow for Safety-Critical Systems.
Proceedings of the Computer Safety, Reliability, and Security, 2016

A Review of Threat Analysis and Risk Assessment Methods in the Automotive Context.
Proceedings of the Computer Safety, Reliability, and Security, 2016

Automatic Testbench Generation for Simulation-based Verification of Safety-critical Systems in UML.
Proceedings of the 6th International Joint Conference on Pervasive and Embedded Computing and Communication Systems (PECCS 2016), 2016

Asset-Centric Security Risk Assessment of Software Components.
Proceedings of the International Workshop on MILS: Architecture and Assurance for Secure Systems, 2016

Thingtegrity: A Scalable Trusted Computing Architecture for the Internet of Things.
Proceedings of the International Conference on Embedded Wireless Systems and Networks, 2016

Poster: Towards a Secure, Resilient, and Distributed Infrastructure for Hydropower Plant Unit Control.
Proceedings of the International Conference on Embedded Wireless Systems and Networks, 2016

Automotive Quality Universities - AQUA Alliance Extension to Higher Education.
Proceedings of the Systems, Software and Services Process Improvement, 2016

Development and Production Processes for Secure Embedded Control Devices.
Proceedings of the Systems, Software and Services Process Improvement, 2016

Supporting Cyber-Security Based on Hardware-Software Interface Definition.
Proceedings of the Systems, Software and Services Process Improvement, 2016

Patterns to establish a secure communication channel.
Proceedings of the 21st European Conference on Pattern Languages of Programs, 2016

Static and dynamic integrity properties patterns.
Proceedings of the 21st European Conference on Pattern Languages of Programs, 2016

An analytical study of security patterns.
Proceedings of the 21st European Conference on Pattern Languages of Programs, 2016

Describing binding time in software design patterns.
Proceedings of the 21st European Conference on Pattern Languages of Programs, 2016

Patterns for designing configurability into domain-specific language elements.
Proceedings of the 21st European Conference on Pattern Languages of Programs, 2016

Diverse Compiling for Software-Based Recovery of Permanent Faults in COTS Processors.
Proceedings of the 46th Annual IEEE/IFIP International Conference on Dependable Systems and Networks Workshops, 2016

Using Model-Based Testing for Manufacturing and Integration-Testing of Embedded Control Systems.
Proceedings of the 2016 Euromicro Conference on Digital System Design, 2016

Software Configuration Based on Order Processes.
Proceedings of the Business Modeling and Software Design - 6th International Symposium, 2016

Simulation-based Verification of Automotive Safety-critical Systems Based on EAST-ADL.
Proceedings of the 7th International Conference on Ambient Systems, 2016

Threat and Risk Assessment Methodologies in the Automotive Domain.
Proceedings of the 7th International Conference on Ambient Systems, 2016

2015
Constraint-Based Verification of Compositions in Safety-Critical Component-Based Systems.
Proceedings of the Software Engineering, 2015

Where does all this waste come from?
J. Softw. Evol. Process., 2015

Balancing Product and Process Assurance for Evolving Security Systems.
Int. J. Secur. Softw. Eng., 2015

Filling the gap between automotive systems, safety, and software engineering.
Elektrotech. Informationstechnik, 2015

Software-Based Fault Recovery via Adaptive Diversity for COTS Multi-Core Processors.
CoRR, 2015

A novel method to speed-up the evaluation of cyber-physical systems (ISO 26262).
Proceedings of the 12th International Workshop on Intelligent Solutions in Embedded Systems, 2015

Bidirectional Crosslinking of System and Software Modeling in the Automotive Domain.
Proceedings of the Software Engineering for Resilient Systems - 7th International Workshop, 2015

Towards Dynamic Software Diversity for Resilient Redundant Embedded Systems.
Proceedings of the Software Engineering for Resilient Systems - 7th International Workshop, 2015

A Comprehensive Safety, Security, and Serviceability Assessment Method.
Proceedings of the Computer Safety, Reliability, and Security, 2015

A Combined Safety-Hazards and Security-Threat Analysis Method for Automotive Systems.
Proceedings of the Computer Safety, Reliability, and Security, 2015

Automated generation of basic software configuration of embedded systems.
Proceedings of the 2015 Conference on research in adaptive and convergent systems, 2015

Test-Driven Migration Towards a Hardware-Abstracted Platform.
Proceedings of the PECCS 2015, 2015

A Textual Domain-Specific Language Based on the UML Testing Profile.
Proceedings of the Model-Driven Engineering and Software Development, 2015

Ubtl - UML Testing Profile based Testing Language.
Proceedings of the MODELSWARD 2015, 2015

Towards a Generic Modeling Language for Contract-Based Design.
Proceedings of the 2nd International Workshop on Model-Driven Engineering for Component-Based Software Systems co-located with ACM/IEEE 18th International Conference on Model Driven Engineering Languages & Systems (MoDELS 2015), 2015

Towards an automated generation of application confinement policies with binary analysis.
Proceedings of the International Symposium on Networks, Computers and Communications, 2015

Automotive embedded software: Migration challenges to multi-core computing platforms.
Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015

Evaluation paradigm selection according to Common Criteria for an incremental product development.
Proceedings of the International Workshop on MILS: Architecture and Assurance for Secure Systems, 2015

Integration of Heterogeneous Tools to a Seamless Automotive Toolchain.
Proceedings of the Systems, Software and Services Process Improvement, 2015

Patterns for common criteria certification.
Proceedings of the 20th European Conference on Pattern Languages of Programs, 2015

Patterns for software integrity protection.
Proceedings of the 20th European Conference on Pattern Languages of Programs, 2015

Model transformation and synchronization process patterns.
Proceedings of the 20th European Conference on Pattern Languages of Programs, 2015

Pattern catalog for multicore migration of embedded automotive systems.
Proceedings of the 20th European Conference on Pattern Languages of Programs, 2015

Trident architectural views: a pattern for dependable systems design.
Proceedings of the 20th European Conference on Pattern Languages of Programs, 2015

Patterns for automated software diversity to support security and reliability.
Proceedings of the 20th European Conference on Pattern Languages of Programs, 2015

Incorporation of Model-Based System and Software Development Environments.
Proceedings of the 41st Euromicro Conference on Software Engineering and Advanced Applications, 2015

A Lean Automotive E/E-System Design Approach with Integrated Requirements Management Capability.
Proceedings of the Software Architecture - 9th European Conference, 2015

Service Deterioration Analysis (SDA): An Early Development Phase Dependability Analysis Method.
Proceedings of the IEEE International Conference on Dependable Systems and Networks Workshops, 2015

A Virtual Fault Injection Framework for Reliability-Aware Software Development.
Proceedings of the IEEE International Conference on Dependable Systems and Networks Workshops, 2015

QEMU-Based Fault Injection for a System-Level Analysis of Software Countermeasures Against Fault Attacks.
Proceedings of the 2015 Euromicro Conference on Digital System Design, 2015

SAHARA: a security-aware hazard and risk analysis method.
Proceedings of the 2015 Design, Automation & Test in Europe Conference & Exhibition, 2015

Evaluation of diverse compiling for software-fault detection.
Proceedings of the 2015 Design, Automation & Test in Europe Conference & Exhibition, 2015

Privilege-Based Remote Attestation: Towards Integrity Assurance for Lightweight Clients.
Proceedings of the 1st ACM Workshop on IoT Privacy, Trust, and Security, 2015

Diverse Compiling for Microprocessor Fault Detection in Temporal Redundant Systems.
Proceedings of the 15th IEEE International Conference on Computer and Information Technology, 2015

2014
Effective development of automation systems through domain-specific modeling in a small enterprise context.
Softw. Syst. Model., 2014

Automotive real-time operating systems: a model-based configuration approach.
SIGBED Rev., 2014

On Design-time Modelling and Verification of Safety-critical Component-based Systems.
Int. J. Networked Distributed Comput., 2014

Efficient development and reuse of domain-specific languages for automation systems.
Int. J. Metadata Semant. Ontologies, 2014

CDL: an extensible constraints framework for model-based development.
Int. J. Metadata Semant. Ontologies, 2014

Formal Fault Tolerance Analysis of Algorithms for Redundant Systems in Early Design Stages.
Proceedings of the Software Engineering for Resilient Systems - 6th International Workshop, 2014

Towards Assured Dynamic Configuration of Safety-Critical Embedded Systems.
Proceedings of the Computer Safety, Reliability, and Security, 2014

Supporting evolving security models for an agile security evaluation.
Proceedings of the IEEE 1st Workshop on Evolving Security and Privacy Requirements Engineering, 2014

Patterns of Software Modeling.
Proceedings of the On the Move to Meaningful Internet Systems: OTM 2014 Workshops, 2014

FIES: A Fault Injection Framework for the Evaluation of Self-Tests for COTS-Based Safety-Critical Systems.
Proceedings of the 15th International Microprocessor Test and Verification Workshop, 2014

A Lightweight Framework for Testing Safety-critical Component-based Systems on Embedded Targets.
Proceedings of the 1st International Workshop on Model-Driven Engineering for Component-Based Software Systems co-located with ACM/IEEE 17th International Conference on Model Driven Engineering Languages & Systems (MoDELS 2014), 2014

Embedding research in the industrial field: a case of a transition to a software product line.
Proceedings of the WISE'14, 2014

Reducing Certification Costs through Assured Dynamic Software Configuration.
Proceedings of the 25th IEEE International Symposium on Software Reliability Engineering Workshops, 2014

Automated Generation of AUTOSAR Description File for Safety-Critical Software Architectures.
Proceedings of the 44. Jahrestagung der Gesellschaft für Informatik, Big Data, 2014

Integrating Functional Safety, Automotive SPICE and Six Sigma - The AQUA Knowledge Base and Integration Examples.
Proceedings of the Systems, Software and Services Process Improvement, 2014

Patterns for hardware-independent development for embedded systems.
Proceedings of the 19th European Conference on Pattern Languages of Programs, 2014

Pattern-based safety development methods: overview and comparison.
Proceedings of the 19th European Conference on Pattern Languages of Programs, 2014

Automotive safety case pattern.
Proceedings of the 19th European Conference on Pattern Languages of Programs, 2014

Module matrix: a pattern for interdisciplinary industry training design.
Proceedings of the 19th European Conference on Pattern Languages of Programs, 2014

Towards pattern-based reuse in safety-critical systems.
Proceedings of the 19th European Conference on Pattern Languages of Programs, 2014

Hardware/Software Co-Design of Elliptic-Curve Cryptography for Resource-Constrained Applications.
Proceedings of the 51st Annual Design Automation Conference 2014, 2014

2013
Power And Fault Emulation for Software Verification and System Stability Testing in Safety Critical Environments.
IEEE Trans. Ind. Informatics, 2013

OASIS: An automotive analysis and safety engineering instrument.
Reliab. Eng. Syst. Saf., 2013

Verifying generic IEC 61508 CPU self-tests with fault injection.
Proceedings of the 8th International Design and Test Symposium, 2013

Software-Based Remote Attestation for Safety-Critical Systems.
Proceedings of the Sixth IEEE International Conference on Software Testing, 2013

Mechanisms to Handle Structural Variability in MATLAB/Simulink Models.
Proceedings of the Safe and Secure Software Reuse, 2013

Implementing Functional Safety Standards - Experiences from the Trials about Required Knowledge and Competencies (SafEUr).
Proceedings of the Systems, Software and Services Process Improvement, 2013

Automotive Knowledge Alliance AQUA - Integrating Automotive SPICE, Six Sigma, and Functional Safety.
Proceedings of the Systems, Software and Services Process Improvement, 2013

Building a safety architecture pattern system.
Proceedings of the 18th European Conference on Pattern Languages of Program, 2013

A binding time guide to creational patterns.
Proceedings of the 18th European Conference on Pattern Languages of Program, 2013

Inversion of control container for safety-critical embedded systems.
Proceedings of the 18th European Conference on Pattern Languages of Program, 2013

Special session: Remote-labs access in internet and performance learning environment projects.
Proceedings of the IEEE Global Engineering Education Conference, 2013

Using a remote lab for teaching energy harvesting enhanced wireless sensor networks.
Proceedings of the IEEE Global Engineering Education Conference, 2013

A Persistent Naming Scheme for Embedded Systems in Automation.
Proceedings of the 20th IEEE International Conference and Workshops on Engineering of Computer Based Systems, 2013

A Component-Based Dynamic Link Support for Safety-Critical Embedded Systems.
Proceedings of the 20th IEEE International Conference and Workshops on Engineering of Computer Based Systems, 2013

Automatized high-level evaluation of security properties for RTL hardware designs.
Proceedings of the Workshop on Embedded Systems Security, 2013

2012
Improving domain representation with multi-paradigm modeling.
Proceedings of the 16th International Software Product Line Conference, 2012

Optimizing problem space representations through domain multi-modeling.
Proceedings of the Third International Workshop on Product LinE Approaches in Software Engineering, 2012

Lightweight Introduction of EAST-ADL2 in an Automotive Software Product Line.
Proceedings of the 45th Hawaii International International Conference on Systems Science (HICSS-45 2012), 2012

EU Project SafEUr - Competence Requirements for Functional Safety Managers.
Proceedings of the Systems, Software and Services Process Improvement, 2012

Applying patterns to model-driven development of automation systems: an industrial case study.
Proceedings of the 17th European Conference on Pattern Languages of Programs, 2012

A Bridge from System to Software Development for Safety-Critical Automotive Embedded Systems.
Proceedings of the 38th Euromicro Conference on Software Engineering and Advanced Applications, 2012

An Architecture for Safe and Secure Automation System Devices and Maintenance Process.
Proceedings of the IEEE 19th International Conference and Workshops on Engineering of Computer-Based Systems, 2012

Analyzing the Complexity of Domain Model Representations.
Proceedings of the IEEE 19th International Conference and Workshops on Engineering of Computer-Based Systems, 2012

2011
A development methodology for variant-rich automotive software architectures.
Elektrotech. Informationstechnik, 2011

Towards multi-modeling for domain description.
Proceedings of the Software Product Lines - 15th International Conference, 2011

Computer-Aided PHA, FTA and FMEA for Automotive Embedded Systems.
Proceedings of the Computer Safety, Reliability, and Security, 2011

Applying Multi-model Based Components for Virtual Organizations.
Proceedings of the 19th International Euromicro Conference on Parallel, 2011

Software Product Lines - An Agile Success Factor?
Proceedings of the Systems, Software and Service Process Improvement, 2011

A Computer-Aided Approach to Preliminary Hazard Analysis for Automotive Embedded Systems.
Proceedings of the 18th IEEE International Conference and Workshops on the Engineering of Computer-Based Systems, 2011

2010
A Model-Based Architecture Supporting Virtual Organizations in Pervasive Systems.
Proceedings of the 15th IEEE International Conference on Engineering of Complex Computer Systems, 2010

Agility Meets Systems Engineering: A Catalogue of Success Factors from Industry Practice.
Proceedings of the Systems, Software and Services Process Improvement, 2010

ECQL: A Query and Action Language for Model-Based Applications.
Proceedings of the 17th IEEE International Conference and Workshops on the Engineering of Computer-Based Systems, 2010

2009
Interpreting Model-Based Components for Information Systems.
Proceedings of the 16th Annual IEEE International Conference and Workshop on the Engineering of Computer Based Systems, 2009

2008
Model-typed component interfaces.
J. Syst. Archit., 2008

Data Model Driven Enterprise Service Bus Interceptors.
Proceedings of the 34th Euromicro Conference on Software Engineering and Advanced Applications, 2008

2007
Implementing Model-Based Data Structures using Transient Model Extensions.
J. Softw., 2007

Platform Design for Software Product Lines of Data-intensive Systems.
Proceedings of the 33rd EUROMICRO Conference on Software Engineering and Advanced Applications (EUROMICRO-SEAA 2007), 2007

Model-Based Data Processing with Transient Model Extensions.
Proceedings of the 14th Annual IEEE International Conference and Workshop on Engineering of Computer Based Systems (ECBS 2007), 2007

2006
Model-typed Component Interfaces.
Proceedings of the 32nd EUROMICRO Conference on Software Engineering and Advanced Applications (EUROMICRO-SEAA 2006), August 29, 2006

Complex Model-Defined Constraints for Database Access with the Entity Container.
Proceedings of the IASTED International Conference on Databases and Applications, 2006

Reflective, Model-Based Data Access with the Type-Safe Entity Container.
Proceedings of the 30th Annual International Computer Software and Applications Conference, 2006

2005
The Entity Container - An Object-Oriented and Model-Driven Persistency Cache.
Proceedings of the 38th Hawaii International Conference on System Sciences (HICSS-38 2005), 2005

A Hybrid Component-Based System Development Process.
Proceedings of the 31st EUROMICRO Conference on Software Engineering and Advanced Applications (EUROMICRO-SEAA 2005), 30 August, 2005

Towards a Contract Aware CORBA Component Container.
Proceedings of the 29th Annual International Computer Software and Applications Conference, 2005

2004
Model-Driven Development of Recursive CORBA Component Assemblies.
Proceedings of the 30th EUROMICRO Conference 2004, 31 August, 2004

Metamodel Code Generation for a Model Driven Architecture.
Proceedings of the 19th International Conference on Computers and Their Applications, 2004

2003
A Test-Driven Component Development Framework based on the CORBA Component Model.
Proceedings of the 27th International Computer Software and Applications Conference (COMPSAC 2003): Design and Assessment of Trustworthy Software-Based Systems, 2003

XMI based Model Linking.
Proceedings of the 16th International Conference on Computer Applications in Industry and Engineering, 2003

2002
A CORBA Persistent State Service based on a UML Model to a Relational Database Mapping.
Proceedings of the Information Systems and Databases (ISDB 2002), 2002

Local Components and Reuse of Legacy Code in the CORBA Component Model.
Proceedings of the 28th EUROMICRO Conference 2002, 4-6 September 2002, Dortmund, Germany, 2002

A novel codesign approach based on distributed virtual machines.
Proceedings of the Tenth International Symposium on Hardware/Software Codesign, 2002

A UML Model to Relational Database Mapping for Dynamic CORBA Component Model Persistency.
Proceedings of the ISCA 17th International Conference Computers and Their Applications, 2002

2001
A HW/SW Codesign Framework Based on Distributed DSP Virtual Machines.
Proceedings of the Euromicro Symposium on Digital Systems Design 2001 (Euro-DSD 2001), 2001

2000
WATIS2: Design and Application of an Environment Simulation System for Test Improvement of Control Software for Automatic Logistic Systems.
Proceedings of the 4th International Workshop on Distributed Simulation and Real-Time Applications (DS-RT 2000), 2000

1999
Combining Different Models of Computation for Cosimulation of Heterogeneous Systems.
Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications, 1999

A Hardware/Software Cosimulation Environment for DSP Applications.
Proceedings of the 25th EUROMICRO '99 Conference, 1999

A Lean Metric Acquisition and Presentation Environment for the Assessment of a Test Process Improvement Experiment.
Proceedings of the 25th EUROMICRO '99 Conference, 1999

1998
Improvement of Control Software for Automatic Logistic Systems Using Executable Environment Models.
Proceedings of the 24th EUROMICRO '98 Conference, 1998


  Loading...