Dario Jeronimo Pasadas

IEEE Trans. Instrum. Meas., 2024

2023

Baseline-Free Damage Imaging of Composite Lap Joint via Parallel Array of Piezoelectric Sensors.

[BibT_eX]

[DOI]

Aadhik Asokkumar

Renaldas Raisutis

Sensors, November, 2023

Polar Coordinate for Damage Imaging of Adhesively Bonded Plates Using Ultrasonic Guided Waves and Laser Doppler Vibrometer Measurements.

[BibT_eX]

[DOI]

Yevgeniya Lugovtsova

Jannis Bulling

IEEE Trans. Instrum. Meas., 2023

Pulse-Echo and Pitch-Catch: Ultrasonic C-Scan of Adhesively Bonded Single Lap-joints.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022

Locating and Imaging Fiber Breaks in CFRP Using Guided Wave Tomography and Eddy Current Testing.

[BibT_eX]

[DOI]

Sensors, 2022

Guided Lamb wave tomography using angle beam transducers and inverse Radon transform for crack image reconstruction.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2020

Defect Classification With SVM and Wideband Excitation in Multilayer Aluminum Plates.

[BibT_eX]

[DOI]

Prashanth Baskaran

IEEE Trans. Instrum. Meas., 2020

2019

Locating Defects in Anisotropic CFRP Plates Using ToF-Based Probability Matrix and Neural Networks.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2019

Locating and Imaging Impact Damage with an Integrated System of PZT and Eddy Current Probe.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018

Eddy current testing of cracks using multi-frequency and noise excitation.

[BibT_eX]

[DOI]

Prashanth Baskaran

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Localization of defects in woven-fabric type CFRP plate by time of flight of scattering guided wave.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017

Inspection of Cracks in Aluminum Multilayer Structures Using Planar ECT Probe and Inversion Problem.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2017

2016

Evaluation of Subsurface Defects Using Diffusion of Motion-Induced Eddy Currents.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2016

2D geometry characterization of cracks from ECT image analysis using planar coils and GMR-sensors.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015

Sub-surface defect detection with motion induced eddy currents in aluminium.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

ECT image analysis applying an inverse problem algorithm with Tikhonov/TV Regularization.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014

GMR versus differential coils in velocity induced eddy current testing.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013

Velocity induced eddy currents technique to inspect cracks in moving conducting media.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Remote field eddy current inspection of metallic tubes using GMR sensors.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2011

Portable eddy current NDT instrument using two different implementations.

[BibT_eX]

[DOI]